make INT[EFGH]# of vt8237 configurable as gpio via devicetree
Change-Id: I70202d81ddd1b0a00eddca4acabc621e5783e805 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/386 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
This commit is contained in:
		
				
					committed by
					
						
						Rudolf Marek
					
				
			
			
				
	
			
			
			
						parent
						
							2138556e2a
						
					
				
				
					commit
					98236ca784
				
			@@ -69,6 +69,8 @@ struct southbridge_via_vt8237r_config {
 | 
			
		||||
 | 
			
		||||
	u8 usb2_dpll_set;
 | 
			
		||||
	u8 usb2_dpll_delay;
 | 
			
		||||
 | 
			
		||||
	u8 int_efgh_as_gpio;
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
#endif /* SOUTHBRIDGE_VIA_VT8237R_CHIP_H */
 | 
			
		||||
 
 | 
			
		||||
@@ -421,10 +421,13 @@ static void vt8237s_init(struct device *dev)
 | 
			
		||||
static void vt8237_common_init(struct device *dev)
 | 
			
		||||
{
 | 
			
		||||
	u8 enables, byte;
 | 
			
		||||
	struct southbridge_via_vt8237r_config *cfg;
 | 
			
		||||
#if !CONFIG_EPIA_VT8237R_INIT
 | 
			
		||||
	unsigned char pwr_on;
 | 
			
		||||
#endif
 | 
			
		||||
 | 
			
		||||
	cfg = dev->chip_info;
 | 
			
		||||
 | 
			
		||||
	/* Enable addr/data stepping. */
 | 
			
		||||
	byte = pci_read_config8(dev, PCI_COMMAND);
 | 
			
		||||
	byte |= PCI_COMMAND_WAIT;
 | 
			
		||||
@@ -509,7 +512,11 @@ static void vt8237_common_init(struct device *dev)
 | 
			
		||||
	 *     | bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch
 | 
			
		||||
	 *   0 | Dynamic Clock Gating Main Switch (1=Enable)
 | 
			
		||||
	 */
 | 
			
		||||
	pci_write_config8(dev, 0x5b, 0xb);
 | 
			
		||||
	if (cfg && cfg->int_efgh_as_gpio) {
 | 
			
		||||
		pci_write_config8(dev, 0x5b, 0x9);
 | 
			
		||||
	} else {
 | 
			
		||||
		pci_write_config8(dev, 0x5b, 0xb);
 | 
			
		||||
	}
 | 
			
		||||
 | 
			
		||||
	/* configure power state of the board after loss of power */
 | 
			
		||||
	if (get_option(&pwr_on, "power_on_after_fail") < 0)
 | 
			
		||||
 
 | 
			
		||||
		Reference in New Issue
	
	Block a user