Now coreboot performs IRQ routing for some boards.

You can see this by executing commands like this:
grep -r pci_assign_irqs coreboot/src/*

This basically AMD/LX based boards: pcengines/alix1c,
digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800.

Also for AMD/GX1 based boards need a patch
[http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch]
for the right IRQ setup.
AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320,
bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p.

I have two ideas.
1. Delete duplicate code from AMD/LX based boards.
2. Add IRQ routing for AMD/GX1 boards in coreboot.

The pirq.patch for IRQ routing logically consist from of two parts:

First part of pirq.patch independent from type chipsets and assign IRQ for
ever PCI device. It part based on AMD/LX write_pirq_routing_table() function.

Second part of pirq.patch depends of type chipset and set PIRQx lines
in interrupt router. This part supports only CS5530/5536 interrupt routers.

IRQ routing functionality is included through PIRQ_ROUTE in Config.lb.

Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on
TeleVideo TC7020, see
http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html.

Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Nikolay Petukhov
2008-03-29 16:59:27 +00:00
committed by Uwe Hermann
parent 0e122af465
commit 9c2255c66c
24 changed files with 198 additions and 195 deletions

View File

@@ -1,6 +1,7 @@
#include <console/console.h>
#include <arch/pirq_routing.h>
#include <string.h>
#include <device/pci.h>
#if (DEBUG==1 && HAVE_PIRQ_TABLE==1)
static void check_pirq_routing_table(struct irq_routing_table *rt)
@@ -94,6 +95,80 @@ unsigned long copy_pirq_routing_table(unsigned long addr)
memcpy((void *)addr, &intel_irq_routing_table, intel_irq_routing_table.size);
printk_info("done.\n");
verify_copy_pirq_routing_table(addr);
pirq_routing_irqs(addr);
return addr + intel_irq_routing_table.size;
}
#endif
#if (PIRQ_ROUTE==1 && HAVE_PIRQ_TABLE==1)
void pirq_routing_irqs(unsigned long addr)
{
int i, j, k, num_entries;
unsigned char irq_slot[4];
unsigned char pirq[4] = {0, 0, 0, 0};
struct irq_routing_table *pirq_tbl;
device_t pdev;
pirq_tbl = (struct irq_routing_table *)(addr);
num_entries = (pirq_tbl->size - 32) / 16;
/* Set PCI IRQs. */
for (i = 0; i < num_entries; i++) {
printk_debug("PIR Entry %d Dev/Fn: %X Slot: %d\n", i,
pirq_tbl->slots[i].devfn >> 3, pirq_tbl->slots[i].slot);
for (j = 0; j < 4; j++) {
int link = pirq_tbl->slots[i].irq[j].link;
int bitmap = pirq_tbl->slots[i].irq[j].bitmap & pirq_tbl->exclusive_irqs;
int irq = 0;
printk_debug("INT: %c link: %x bitmap: %x ",
'A' + j, link, bitmap);
if (!bitmap|| !link || link > 4) {
printk_debug("not routed\n");
irq_slot[j] = irq;
continue;
}
/* yet not routed */
if (!pirq[link - 1]) {
for (k = 2; k < 15; k++) {
if (!((bitmap >> k) & 1))
continue;
irq = k;
/* yet not routed */
if (pirq[0] != irq && pirq[1] != irq && pirq[2] != irq && pirq[3] != irq)
break;
}
if (irq)
pirq[link - 1] = irq;
}
else
irq = pirq[link - 1];
printk_debug("IRQ: %d\n", irq);
irq_slot[j] = irq;
}
/* Bus, device, slots IRQs for {A,B,C,D}. */
pci_assign_irqs(pirq_tbl->slots[i].bus,
pirq_tbl->slots[i].devfn >> 3, irq_slot);
}
printk_debug("PIRQ1: %d\n", pirq[0]);
printk_debug("PIRQ2: %d\n", pirq[1]);
printk_debug("PIRQ3: %d\n", pirq[2]);
printk_debug("PIRQ4: %d\n", pirq[3]);
pirq_assign_irqs(pirq);
}
#endif

View File

@@ -42,6 +42,12 @@ extern const struct irq_routing_table intel_irq_routing_table;
#if HAVE_PIRQ_TABLE==1
unsigned long copy_pirq_routing_table(unsigned long start);
unsigned long write_pirq_routing_table(unsigned long start);
#if PIRQ_ROUTE==1
void pirq_routing_irqs(unsigned long start);
void pirq_assign_irqs(const unsigned char pIntAtoD[4]);
#else
#define pirq_routing_irqs(start) {}
#endif
#else
#define copy_pirq_routing_table(start) (start)
#define write_pirq_routing_table(start) (start)