soc/intel/{adl, cmn, mtl}: Refactor MP Init related configs

This patch optimizes CPU MP Init related configs being used within
multiple SoC directory and moving essential configs into common code
to let the SoC user to choose as per the requirement.

TEST=Able to build and boot google/kano and google/rex.

Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I12adcc04e84244656a0d2dcf97607bd036320887
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>

src/soc/intel/alderlake/Kconfig

@@ -75,6 +75,7 @@ config CPU_SPECIFIC_OPTIONS
 	select INTEL_GMA_ADD_VBT if RUN_FSP_GOP
 	select INTEL_GMA_OPREGION_2_1
 	select INTEL_TXT_LIB
+	select MP_SERVICES_PPI_V2
 	select MRC_SETTINGS_PROTECT
 	select PARALLEL_MP_AP_WORK
 	select PLATFORM_USES_FSP2_2
@@ -476,31 +477,6 @@ config USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS
 	  Note: selection of this config would introduce an additional warm reset in
 	  cold-reset scenarios due to function disabling of the UFS controller.
 
-choice
-	prompt "Multiprocessor (MP) Initialization configuration to use"
-	default USE_FSP_MP_INIT
-
-config USE_FSP_MP_INIT
-	bool "Use FSP MP init"
-	select MP_SERVICES_PPI_V2
-	help
-	  Upon selection, coreboot brings APs from reset and the FSP runs feature programming.
-
-config USE_COREBOOT_MP_INIT
-	bool "Use coreboot MP init"
-	# FSP assumes ownership of the APs (Application Processors)
-	# upon passing `NULL` pointer to the CpuMpPpi FSP-S UPD.
-	# Hence, select `MP_SERVICES_PPI_V2_NOOP` config to pass a valid
-	# pointer to the CpuMpPpi UPD with FSP_UNSUPPORTED type APIs.
-	# This will protect APs from getting hijacked by FSP while coreboot
-	# decides to set SkipMpInit UPD.
-	select MP_SERVICES_PPI_V2_NOOP
-	select RELOAD_MICROCODE_PATCH
-	help
-	  Upon selection, coreboot performs MP Init.
-
-endchoice
-
 if STITCH_ME_BIN
 
 config CSE_BPDT_VERSION

src/soc/intel/alderlake/fsp_params.c

@@ -597,7 +597,7 @@ static void fill_fsps_cpu_params(FSP_S_CONFIG *s_cfg,
 	 */
 	s_cfg->CpuMpPpi = (uintptr_t)mp_fill_ppi_services_data();
 
-	if (CONFIG(USE_FSP_MP_INIT))
+	if (CONFIG(USE_FSP_FEATURE_PROGRAM_ON_APS))
 		/*
 		 * Fill `2nd microcode loading FSP UPD` if FSP is running CPU feature
 		 * programming.

src/soc/intel/common/block/cpu/Kconfig

@@ -18,6 +18,30 @@ config SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
 	  ensured that all MTRRs are re-programmed based on the DRAM
 	  resource settings.
 
+choice
+	prompt "Application Processors (AP) Feature Programming Configuration to use"
+	default USE_FSP_FEATURE_PROGRAM_ON_APS if MP_SERVICES_PPI_V1 || MP_SERVICES_PPI_V2
+	default USE_COREBOOT_MP_INIT if MP_SERVICES_PPI_V2_NOOP
+
+config USE_FSP_FEATURE_PROGRAM_ON_APS
+	bool "Allow FSP running CPU feature programming on MP init"
+	help
+	  Upon selection, coreboot brings APs from reset and the FSP runs feature programming.
+
+config USE_COREBOOT_MP_INIT
+	bool "Use coreboot MP init"
+	# FSP assumes ownership of the APs (Application Processors)
+	# upon passing `NULL` pointer to the CpuMpPpi FSP-S UPD.
+	# Hence, select `MP_SERVICES_PPI_V2_NOOP` config to pass a valid
+	# pointer to the CpuMpPpi UPD with FSP_UNSUPPORTED type APIs.
+	# This will protect APs from getting hijacked by FSP while coreboot
+	# decides to set SkipMpInit UPD.
+	select RELOAD_MICROCODE_PATCH
+	help
+	  Upon selection, coreboot performs MP Init.
+
+endchoice
+
 config SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE
 	bool
 	depends on SOC_INTEL_COMMON_BLOCK_CPU

src/soc/intel/meteorlake/Kconfig

@@ -39,6 +39,7 @@ config CPU_SPECIFIC_OPTIONS
 	select INTEL_GMA_OPREGION_2_1
 	select IOAPIC
 	select MICROCODE_BLOB_UNDISCLOSED
+	select MP_SERVICES_PPI_V2
 	select MRC_SETTINGS_PROTECT
 	select PARALLEL_MP_AP_WORK
 	select PLATFORM_USES_FSP2_3
@@ -345,31 +346,6 @@ config SOC_INTEL_GFX_FRAMEBUFFER_OFFSET
 	hex
 	default 0x800000
 
-choice
-	prompt "Multiprocessor (MP) Initialization configuration to use"
-	default MTL_USE_FSP_MP_INIT
-
-config MTL_USE_FSP_MP_INIT
-	bool "Use FSP MP init"
-	select MP_SERVICES_PPI_V2
-	help
-	  Upon selection, coreboot brings APs from reset and the FSP runs feature programming.
-
-config MTL_USE_COREBOOT_MP_INIT
-	bool "Use coreboot MP init"
-	# FSP assumes ownership of the APs (Application Processors)
-	# upon passing `NULL` pointer to the CpuMpPpi FSP-S UPD.
-	# Hence, select `MP_SERVICES_PPI_V2_NOOP` config to pass a valid
-	# pointer to the CpuMpPpi UPD with FSP_UNSUPPORTED type APIs.
-	# This will protect APs from getting hijacked by FSP while coreboot
-	# decides to set SkipMpInit UPD.
-	select MP_SERVICES_PPI_V2_NOOP
-	select RELOAD_MICROCODE_PATCH
-	help
-	  Upon selection, coreboot performs MP Initialization that includes feature programming.
-
-endchoice
-
 config FSP_PUBLISH_MBP_HOB
 	bool
 	default n if CHROMEOS

src/soc/intel/meteorlake/fsp_params.c

@@ -389,7 +389,7 @@ static void fill_fsps_cpu_params(FSP_S_CONFIG *s_cfg,
 	 * Fill `2nd microcode loading FSP UPD` if FSP is running CPU feature
 	 * programming.
 	 */
-	if (CONFIG(MTL_USE_FSP_MP_INIT))
+	if (CONFIG(USE_FSP_FEATURE_PROGRAM_ON_APS))
 		fill_fsps_microcode_params(s_cfg, config);
 }