Whitespace fixes.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3638 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/nvidia/l1_2pvv/get_bus_conf.c

@@ -110,7 +110,6 @@ void get_bus_conf(void)
 	memset(m, 0, sizeof(struct mb_sysconf_t));
 
 	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-
 	for (i = 0; i < sysconf.hc_possible_num; i++) {
 		sysconf.pci1234[i] = pci1234x[i];
 		sysconf.hcdn[i] = hcdnx[i];

src/mainboard/nvidia/l1_2pvv/irq_tables.c

@@ -20,10 +20,10 @@
  */
 
 /* This file was generated by getpir.c, do not modify!
-   (but if you do, please run checkpir on it to verify)
+ * (but if you do, please run checkpir on it to verify)
-   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
-   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
 */
 #include <console/console.h>
 #include <device/pci.h>

src/mainboard/tyan/s2912/apc_auto.c

@@ -49,17 +49,6 @@
 
 #include "arch/i386/lib/console.c"
 
-#if 0 
-static void post_code(uint8_t value) {
-#if 1
-        int i;
-        for(i=0;i<0x80000;i++) {
-                outb(value, 0x80);
-        }
-#endif
-}
-#endif
-
 #include <cpu/amd/model_fxx_rev.h>
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/amd/model_fxx/apic_timer.c"

src/mainboard/tyan/s2912/get_bus_conf.c

@@ -153,8 +153,6 @@ void get_bus_conf(void)
 		printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
 	}
 
-
-
 /*I/O APICs:	APIC ID	Version	State		Address*/
 #if CONFIG_LOGICAL_CPUS==1
 	apicid_base = get_apicid_base(1);

src/mainboard/tyan/s2912/irq_tables.c

@@ -20,10 +20,10 @@
  */
 
 /* This file was generated by getpir.c, do not modify!
-   (but if you do, please run checkpir on it to verify)
+ * (but if you do, please run checkpir on it to verify)
-   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
-   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
 */
 #include <console/console.h>
 #include <device/pci.h>

src/mainboard/tyan/s2912_fam10/apc_auto.c

@@ -49,17 +49,6 @@
 
 #include "arch/i386/lib/console.c"
 
-#if 0 
-static void post_code(uint8_t value) {
-#if 1
-        int i;
-        for(i=0;i<0x80000;i++) {
-                outb(value, 0x80);
-        }
-#endif
-}
-#endif
-
 #include <cpu/amd/model_fxx_rev.h>
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/amd/model_fxx/apic_timer.c"

src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c

@@ -286,7 +286,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	printk_debug("bsp_apicid = %02x \n", bsp_apicid);
 	printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
 
-
 	/* Setup sysinfo defaults */
 	set_sysinfo_in_ram(0);
 
@@ -308,9 +307,9 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	/* wait for all the APs core0 started by finalize_node_setup. */
 	/* FIXME: A bunch of cores are going to start output to serial at once.
-	   It would be nice to fixup prink spinlocks for ROM XIP mode.
+	 * It would be nice to fixup prink spinlocks for ROM XIP mode.
-	   I think it could be done by putting the spinlock flag in the cache
+	 * I think it could be done by putting the spinlock flag in the cache
-	   of the BSP located right after sysinfo.
+	 * of the BSP located right after sysinfo.
 	 */
 	wait_all_core0_started();
 
@@ -329,7 +328,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
 
 	/* FIXME: The sb fid change may survive the warm reset and only
-	   need to be done once.*/
+	 * need to be done once.*/
 	enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
 
 	post_code(0x39);

src/mainboard/tyan/s2912_fam10/get_bus_conf.c

@@ -127,7 +127,6 @@ void get_bus_conf(void)
 		printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
 	}
 
-
 /*I/O APICs:	APIC ID	Version	State		Address*/
 #if CONFIG_LOGICAL_CPUS==1
 	apicid_base = get_apicid_base(1);

src/mainboard/tyan/s2912_fam10/irq_tables.c

@@ -20,10 +20,10 @@
  */
 
 /* This file was generated by getpir.c, do not modify! 
-   (but if you do, please run checkpir on it to verify)
+ * (but if you do, please run checkpir on it to verify)
-   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+ * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
-   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
 */
 #include <console/console.h>
 #include <device/pci.h>