haswell: Misc power management setup and fixes

1) fix enable of power aware interrupt routing
2) set BIOS_RESET_CPL to 3 instead of 1
3) mirror PKG power limit values from MSR to MMIO on all SKUs
4) mirror DDR power limit values from MMIO to MSR
5) remove DMI settings that were from snb/ivb as they do
not apply to haswell

1) verify power aware interrupt routing is working by looking
in /proc/interrupts to see interrupts routed to both cores
instead of always to core0

BEFORE: 58:       4943          0   PCI-MSI-edge      ahci
AFTER:  58:       4766        334   PCI-MSI-edge      ahci

2) read back BIOS_RESET_CPL to verify it is == 3

localhost ~ # iotools mmio_read32 0xfed15da8
0x00000003

3) read PKG power limit from MMIO and verify it is the same
as the MSR value

localhost ~ # rdmsr 0 0x610
0x0000809600dc8078
localhost ~ # iotools mmio_read32 0xfed159a0
0x00dc8078
localhost ~ # iotools mmio_read32 0xfed159a4
0x00008096

4) read DDR power limit from MSR and verify it is the same
as the MMIO value (note this is zero based on current MRC input)

localhost ~ # rdmsr 0 0x618
0x0000000000000000
localhost ~ # iotools mmio_read32 0xfed158e0
0x00000000
localhost ~ # iotools mmio_read32 0xfed158e4
0x00000000

Change-Id: I6cc4c5b2a81304e9deaad8cffcaf604ebad60b29
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60544
Reviewed-on: http://review.coreboot.org/4333
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)

src/northbridge/intel/haswell/haswell.h

@@ -125,6 +125,12 @@
 
 #define BIOS_RESET_CPL	0x5da8	/* 8bit */
 
+/* Some power MSRs are also represented in MCHBAR */
+#define MCH_PKG_POWER_LIMIT_LO	0x59a0
+#define MCH_PKG_POWER_LIMIT_HI	0x59a4
+#define MCH_DDR_POWER_LIMIT_LO	0x58e0
+#define MCH_DDR_POWER_LIMIT_HI	0x58e4
+
 /*
  * EPBAR - Egress Port Root Complex Register Block
  */