sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

intel/e7505: Drop ECC scrubber code

Browse Source 
This was already disabled and mostly incompatible
with romstage having stack in CAR.

Change-Id: I1fe02bef668a5bc8ce3d5a1d8090670752b10c3e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit is contained in:
Kyösti Mälkki
2019-01-01 08:58:59 +02:00
parent 768cd37bc3
commit c859f10eec
5 changed files with 0 additions and 120 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
src/northbridge/intel/e7505/Kconfig
View File

@@ -24,8 +24,4 @@ config NORTHBRIDGE_SPECIFIC_OPTIONS # dummy
select HAVE_DEBUG_RAM_SETUP
select POSTCAR_STAGE
config HW_SCRUBBER
bool
default n
endif

102
src/northbridge/intel/e7505/raminit.c
View File

@@ -904,95 +904,6 @@ static void configure_e7501_ram_addresses(const struct mem_controller
pci_write_config16(MCHDEV, REMAPLIMIT, reg);
}
/**
* Execute ECC full-speed scrub once and leave scrubber disabled.
*
* NOTE: All cache and stack is lost during ECC scrub loop.
*/
static __always_inline void
initialize_ecc(unsigned long ret_addr, unsigned long ret_addr2)
{
uint16_t scrubbed = pci_read_config16(MCHDEV, MCHCFGNS) & 0x08;
if (!scrubbed) {
RAM_DEBUG_MESSAGE("Initializing ECC state...\n");
/* ECC scrub flushes cache-lines and stack, need to
* store return address from romstage.c:main().
*/
asm volatile(
"movd %0, %%xmm0;"
"movd (%0), %%xmm1;"
"movd %1, %%xmm2;"
"movd (%1), %%xmm3;"
:: "r" (ret_addr), "r" (ret_addr2) :
);
/* NOTE: All cache is lost during this loop.
* Make sure PCI access does not use stack.
*/
pci_write_config16(MCHDEV, MCHCFGNS, 0x01);
do {
scrubbed = pci_read_config16(MCHDEV, MCHCFGNS);
} while (! (scrubbed & 0x08));
pci_write_config16(MCHDEV, MCHCFGNS, (scrubbed & ~0x07) | 0x04);
/* Some problem remains with XIP cache from ROM, so for
* now, I disable XIP and also invalidate cache (again)
* before the remaining small portion of romstage.
*
* Adding NOPs here has unexpected results, making
* the first do_printk()/vtxprintf() after ECC scrub
* fail midway. Sometimes vtxprintf() dumps strings
* completely but with every 4th (fourth) character as "/".
*
* An inlined dump to console of the same string,
* before vtxprintf() call, is successful. So the
* source string should be completely in cache already.
*
* I need to review this again with CPU microcode
* update applied pre-CAR.
*/
/* Disable and invalidate all cache. */
msr_t xip_mtrr = rdmsr(MTRR_PHYS_MASK(1));
xip_mtrr.lo &= ~MTRR_PHYS_MASK_VALID;
invd();
wrmsr(MTRR_PHYS_MASK(1), xip_mtrr);
invd();
RAM_DEBUG_MESSAGE("ECC state initialized.\n");
/* Recover IP for return from main. */
asm volatile(
"movd %%xmm0, %%edi;"
"movd %%xmm1, (%%edi);"
"movd %%xmm2, %%edi;"
"movd %%xmm3, (%%edi);"
::: "edi"
);
#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)
unsigned int a1, a2;
asm volatile("movd %%xmm2, %%eax;" : "=a" (a1) ::);
asm volatile("movd %%xmm3, %%eax;" : "=a" (a2) ::);
printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
asm volatile("movd %%xmm0, %%eax;" : "=a" (a1) ::);
asm volatile("movd %%xmm1, %%eax;" : "=a" (a2) ::);
printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
#endif
}
/* Clear the ECC error bits. */
pci_write_config8(RASDEV, DRAM_FERR, 0x03);
pci_write_config8(RASDEV, DRAM_NERR, 0x03);
/* Clear DRAM Interface error bits. */
pci_write_config32(RASDEV, FERR_GLOBAL, 1 << 18);
pci_write_config32(RASDEV, NERR_GLOBAL, 1 << 18);
}
/**
* Program the DRAM Timing register (DRT) of the E7501 (except for CAS#
* latency, which is assumed to have been programmed already), based on the
@@ -1862,19 +1773,6 @@ void e7505_mch_init(const struct mem_controller *memctrl)
sdram_enable(memctrl);
}
/**
* Scrub and reset error counts for ECC dimms.
*
* NOTE: this will invalidate cache and disable XIP cache for the
* short remaining part of romstage.
*/
void e7505_mch_scrub_ecc(unsigned long ret_addr)
{
unsigned long ret_addr2 = (unsigned long)((unsigned long*)&ret_addr-1);
if ((pci_read_config32(MCHDEV, DRC)>>20 & 3) == 2)
initialize_ecc(ret_addr, ret_addr2);
}
void e7505_mch_done(const struct mem_controller *memctrl)
{
sdram_post_ecc(memctrl);

1
src/northbridge/intel/e7505/raminit.h
View File

@@ -31,7 +31,6 @@ struct mem_controller {
};
void e7505_mch_init(const struct mem_controller *memctrl);
void e7505_mch_scrub_ecc(unsigned long ret_addr);
void e7505_mch_done(const struct mem_controller *memctrl);
int e7505_mch_is_ready(void);