sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Remove failover/fallback/normal handling in mainboards'

Browse Source 
romstage.c. That's newconfig stuff.

1. In failover_process(), I removed the fallback/normal selection logic
and kept the remaining hardware init in. The if-clauses' conditions are
reverted to match.
Remove #if failover||fallback guard.

2. Change cache_as_ram_main() to first call failover_process, then
real_main unconditionally.

3. Move failover_process's code to the beginning of real_main, remove
failover_process and its call in cache_as_ram_main.

4. Remove cache_as_ram_main, rename real_main to cache_as_ram_main (same
arguments, so no problem with that)


Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5255 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Patrick Georgi 2010-03-17 22:44:39 +00:00
parent 78b4033584
commit ce6fb1ee2b
23 changed files with 262 additions and 1617 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/arch/i386/lib/failover_failover.lds
View File

@ -1,2 +0,0 @@
__fallback_image = (CONFIG_ROMBASE & 0xfffffff0) - 8;
__normal_image = ((CONFIG_ROMBASE - CONFIG_FALLBACK_SIZE) & 0xfffffff0) - 8;

83
src/mainboard/amd/mahogany_fam10/romstage.c
View File

@ -131,80 +131,9 @@ static int spd_read_byte(u32 device, u32 address)
#endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "northbridge/amd/amdfam10/early_ht.c"
#include "southbridge/amd/sb700/sb700_early_setup.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
int last_boot_normal_flag = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_flag) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sb700_pci_port80();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_flag) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0.
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if (CONFIG_USE_FAILOVER_IMAGE==0)
//#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
@ -218,7 +147,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#define DIMM2 0x52
#define DIMM3 0x53
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@ -227,6 +156,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
u32 val;
msr_t msr;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sb700_pci_port80();
}
post_code(0x30);
if (bist == 0) {

82
src/mainboard/amd/serengeti_cheetah/romstage.c
View File

@ -154,82 +154,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/fidvid.c"
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
//first node
@ -259,6 +189,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct cpuid_result cpuid1;
#endif
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

86
src/mainboard/amd/serengeti_cheetah_fam10/romstage.c
View File

@ -144,88 +144,15 @@ static int spd_read_byte(u32 device, u32 address)
#endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
int last_boot_normal_flag = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_flag) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_flag) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0.
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if (CONFIG_USE_FAILOVER_IMAGE==0)
#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@ -233,6 +160,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
u32 val;
msr_t msr;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
}
post_code(0x30);
if (bist == 0) {

87
src/mainboard/asus/a8n_e/romstage.c
View File

@ -98,9 +98,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif /* CONFIG_USE_FAILOVER_IMAGE */
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \
|| ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -121,79 +118,8 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a CPU only reset? Or is this a secondary CPU? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
/* Is this a deliberate reset by the BIOS? */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary CPU. How should I boot? */
else if (do_normal_boot()) {
goto normal_image;
} else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT == 1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT == 1
#if CONFIG_USE_FAILOVER_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE == 0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
@ -208,6 +134,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
unsigned nodes, bsp_apicid = 0;
struct mem_controller ctrl[8];
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
}
if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);

85
src/mainboard/gigabyte/ga_2761gxdk/romstage.c
View File

@ -152,9 +152,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/sis/sis966/sis966_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -178,77 +175,9 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the sis966 */
sis966_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@ -264,6 +193,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the sis966 */
sis966_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

83
src/mainboard/gigabyte/m57sli/romstage.c
View File

@ -150,8 +150,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -176,77 +174,10 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@ -263,6 +194,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
unsigned bsp_apicid = 0;
uint8_t tmp = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

84
src/mainboard/hp/dl145_g3/romstage.c
View File

@ -155,8 +155,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "northbridge/amd/amdk8/early_ht.c"
#if 0
@ -197,78 +195,9 @@ static void setup_early_ipmi_serial()
}
#endif
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
/* Is this a cpu only reset? Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal()) { // RTC already inited
goto normal_image; //normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
bcm5785_enable_rom();
bcm5785_enable_lpc();
//enable RTC
pc87417_enable_dev(RTC_DEV);
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal()) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
//first node
@ -287,6 +216,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
bcm5785_enable_rom();
bcm5785_enable_lpc();
//enable RTC
pc87417_enable_dev(RTC_DEV);
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);

82
src/mainboard/iwill/dk8_htx/romstage.c
View File

@ -130,82 +130,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/fidvid.c"
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
//first node
@ -224,6 +154,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset; int i;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

82
src/mainboard/iwill/dk8s2/romstage.c
View File

@ -130,82 +130,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/fidvid.c"
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
//first node
@ -224,6 +154,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset; int i;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

82
src/mainboard/iwill/dk8x/romstage.c
View File

@ -130,82 +130,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/fidvid.c"
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
//first node
@ -224,6 +154,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset; int i;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the rom access for 4M */
amd8111_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

87
src/mainboard/msi/ms7135/romstage.c
View File

@ -100,9 +100,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif /* CONFIG_USE_FAILOVER_IMAGE */
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \
|| ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -124,79 +121,8 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a CPU only reset? Or is this a secondary CPU? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
/* Is this a deliberate reset by the BIOS? */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary CPU. How should I boot? */
else if (do_normal_boot()) {
goto normal_image;
} else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT == 1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT == 1
#if CONFIG_USE_FAILOVER_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE == 0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
(0xa << 3) | 0, (0xa << 3) | 1, 0, 0,
@ -211,6 +137,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}

80
src/mainboard/msi/ms7260/romstage.c
View File

@ -131,8 +131,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -154,74 +152,9 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned int last_boot_normal_x = last_boot_normal();
/* Is this a CPU only reset? Or is this a secondary CPU? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x)
goto normal_image;
else
goto fallback_image;
}
/* Nothing special needs to be done to find bus 0. */
/* Allow the HT devices to be found. */
enumerate_ht_chain();
sio_setup();
/* Setup the MCP55. */
mcp55_enable_rom();
/* Is this a deliberate reset by the BIOS? */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary CPU. How should I boot? */
else if (do_normal_boot()) {
goto normal_image;
} else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image":
:"a" (bist), "b"(cpu_init_detectedx)
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image":
:"a" (bist), "b"(cpu_init_detectedx)
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT == 1
#if CONFIG_USE_FAILOVER_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE == 0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
@ -237,6 +170,17 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0. */
/* Allow the HT devices to be found. */
enumerate_ht_chain();
sio_setup();
/* Setup the MCP55. */
mcp55_enable_rom();
}
if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);

86
src/mainboard/msi/ms9652_fam10/romstage.c
View File

@ -145,8 +145,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"
@ -165,81 +163,12 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@ -249,6 +178,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
u32 wants_reset;
msr_t msr;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
if (bist == 0) {

85
src/mainboard/nvidia/l1_2pvv/romstage.c
View File

@ -150,8 +150,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -177,77 +175,8 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@ -263,6 +192,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

81
src/mainboard/supermicro/h8dme/romstage.c
View File

@ -193,8 +193,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -223,78 +221,13 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
} else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image": /* outputs */
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image": /* outputs */
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
/* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */
#define RC0 (2<<8)
#define RC1 (1<<8)
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
/* The SPD is being read from the CPU1 (marked CPU2 on the board) and we
don't know how to switch the SMBus to decode the CPU0 SPDs. So, The
@ -319,6 +252,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

84
src/mainboard/supermicro/h8dmr/romstage.c
View File

@ -139,8 +139,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -169,77 +167,9 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@ -255,6 +185,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

86
src/mainboard/supermicro/h8dmr_fam10/romstage.c
View File

@ -135,8 +135,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"
@ -165,81 +163,12 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@ -248,6 +177,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
u32 wants_reset;
msr_t msr;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
if (bist == 0) {

86
src/mainboard/supermicro/h8qme_fam10/romstage.c
View File

@ -138,8 +138,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"
@ -168,75 +166,6 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
@ -282,7 +211,7 @@ void write_GPIO(void)
pnp_exit_ext_func_mode(GPIO3_DEV);
}
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@ -291,6 +220,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
u32 wants_reset;
msr_t msr;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
if (bist == 0) {

108
src/mainboard/tyan/s2895/failover.c
View File

@ -1,108 +0,0 @@
#define ASSEMBLY 1
#define __PRE_RAM__
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
#define post_code(x) outb(x, 0x80)
#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
#define SUPERIO_GPIO_IO_BASE 0x400
static void sio_setup(void)
{
unsigned value;
uint32_t dword;
uint8_t byte;
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
byte |= 0x20;
pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
dword |= (1<<29)|(1<<0);
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4);
dword |= (1<<16);
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
value &= 0xbf;
lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
}
void mainboard_bsp_init()
{
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
mainboard_bsp_init();
/* Is this a deliberate reset by the bios */
post_code(0x22);
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
post_code(0x23);
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b"(cpu_init_detectedx) /* inputs */
);
fallback_image:
post_code(0x25);
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
}

88
src/mainboard/tyan/s2895/romstage.c
View File

@ -116,8 +116,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -149,81 +147,9 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
/* Is this a deliberate reset by the bios */
// post_code(0x22);
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
// post_code(0x23);
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b"(cpu_init_detectedx) /* inputs */
);
fallback_image:
// post_code(0x25);
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@ -240,6 +166,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the ck804 */
ck804_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}

84
src/mainboard/tyan/s2912/romstage.c
View File

@ -148,8 +148,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@ -176,77 +174,9 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@ -262,6 +192,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}

86
src/mainboard/tyan/s2912_fam10/romstage.c
View File

@ -144,8 +144,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"
@ -170,81 +168,12 @@ static void sio_setup(void)
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
/* Is this a deliberate reset by the bios */
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
)
#endif
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if CONFIG_HAVE_FAILOVER_BOOT==1
#if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
#if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
#if CONFIG_USE_FAILOVER_IMAGE==0
#include "spd_addr.h"
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@ -253,6 +182,19 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
u32 wants_reset;
msr_t msr;
if (!((cpu_init_detectedx) || (!boot_cpu()))) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
/* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
if (bist == 0) {