mb/google/hatch/scout: update gpios and device tree
Scout-specific changes to puff reference following bring-up - copy baseline changes from genesis - update GPIOs - update PCIe ports for TPUs - remove LSPCON - enable eMMC - disable touch I2C - enable uart BUG=b:187078663 TEST=boot scout BRANCH=none Signed-off-by: Jeff Chase <jnchase@google.com> Change-Id: Ic3cb9cf515ab7a4a0ebbee249644dd3f133d8735 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Jeff Chase
committed by
Tim Wawrzynczak
Tim Wawrzynczak
parent
cf6e4570db
commit
d9b714dada
@@ -9,33 +9,83 @@ static const struct pad_config gpio_table[] = {
|
||||
PAD_CFG_GPI(GPP_A16, NONE, DEEP),
|
||||
/* A18 : LAN_PE_ISOLATE_ODL */
|
||||
PAD_CFG_GPO(GPP_A18, 1, DEEP),
|
||||
/* A19 : Not connected */
|
||||
PAD_NC(GPP_A19, NONE),
|
||||
/* A20 : Not connected */
|
||||
PAD_NC(GPP_A20, NONE),
|
||||
/* A23 : M2_WLAN_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT),
|
||||
|
||||
/* B5 : LAN_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
|
||||
/* B6 : M2_SSD_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1),
|
||||
/* B7 : M2_TPU0_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
|
||||
/* B8 : CLK_PCIE_REQ3 (not connected) */
|
||||
PAD_NC(GPP_B8, NONE),
|
||||
/* B9 : M2_TPU1_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
|
||||
/* B10 : M2_WLAN_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
|
||||
|
||||
/* C0 : SMBCLK */
|
||||
PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
|
||||
/* C1 : SMBDATA */
|
||||
PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
|
||||
/* C3 : PCH_MBCLK1_R (i350) */
|
||||
PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1),
|
||||
/* C4 : PCH_MBDAT1_R (i350) */
|
||||
PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1),
|
||||
/* C6: M2_WLAN_WAKE_ODL */
|
||||
PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE),
|
||||
/* C7 : LAN_WAKE_ODL */
|
||||
PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE),
|
||||
/* C10 : PCH_PCON_RST_ODL */
|
||||
PAD_CFG_GPO(GPP_C10, 1, DEEP),
|
||||
/* C11 : PCH_PCON_PDB_ODL */
|
||||
/* C11 : PCH_PCON1_PDB_ODL */
|
||||
PAD_CFG_GPO(GPP_C11, 1, DEEP),
|
||||
/* C12 : PCH_RX_TSUM_UART_TX */
|
||||
PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1),
|
||||
/* C13 : PCH_RX_TSUM_UART_RX */
|
||||
PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1),
|
||||
/* C15 : WLAN_OFF_L */
|
||||
PAD_CFG_GPO(GPP_C15, 1, DEEP),
|
||||
|
||||
/* E2 : EN_PP_MST_OD */
|
||||
PAD_CFG_GPO(GPP_E2, 1, DEEP),
|
||||
/* E9 : USB_A0_OC_ODL */
|
||||
PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
|
||||
/*
|
||||
* TODO(b/187094460): Re-enable touch screen I2C after resolving USB
|
||||
* conflict
|
||||
*/
|
||||
|
||||
/* C18 : PCH_I2C_USI_SDA */
|
||||
PAD_NC(GPP_C18, NONE),
|
||||
/* C19 : PCH_I2C_USI_SDL */
|
||||
PAD_NC(GPP_C19, NONE),
|
||||
|
||||
/* D13 : SMBUS_ISP_SCALAR */
|
||||
PAD_CFG_GPO(GPP_D13, 0, DEEP),
|
||||
/* D14 : EC_PCH_INT_L */
|
||||
PAD_CFG_GPI_APIC(GPP_D14, NONE, PLTRST, LEVEL, INVERT),
|
||||
/* D15 : USI_RST_L */
|
||||
PAD_CFG_GPO(GPP_D15, 1, DEEP),
|
||||
|
||||
/* E2 : Not connected */
|
||||
PAD_NC(GPP_E2, NONE),
|
||||
/* E3 : TPU_RST_PIN40 */
|
||||
PAD_CFG_GPO(GPP_E3, 1, DEEP),
|
||||
/* E7 : TPU_RST_PIN42 */
|
||||
PAD_CFG_GPO(GPP_E7, 1, DEEP),
|
||||
/* E9 : PU 10K to PP3300_SOC_A */
|
||||
PAD_NC(GPP_E9, NONE),
|
||||
/* E10 : USB_A1_OC_ODL */
|
||||
PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
|
||||
/* E15 : PCH_TYPEC_UPFB */
|
||||
PAD_CFG_GPI(GPP_E15, NONE, DEEP),
|
||||
|
||||
/* E18 : DDI1_CLK */
|
||||
PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1),
|
||||
/* E19 : DDI1_DATA */
|
||||
PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1),
|
||||
|
||||
/* F11 : EMMC_CMD */
|
||||
PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1),
|
||||
@@ -66,6 +116,10 @@ static const struct pad_config gpio_table[] = {
|
||||
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
|
||||
/* H5: PCH_I2C_PCON_SCL */
|
||||
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
|
||||
/* H6 : PCH_I2C_TPU_SDA */
|
||||
PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),
|
||||
/* H7 : PCH_I2C_TPU_SCL */
|
||||
PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),
|
||||
/* H22 : PWM_PP3300_BIOZZER */
|
||||
PAD_CFG_GPO(GPP_H22, 0, DEEP),
|
||||
};
|
||||
|
||||
@@ -5,4 +5,7 @@
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
|
||||
#undef EC_SYNC_IRQ
|
||||
#define EC_SYNC_IRQ GPP_D14_IRQ
|
||||
|
||||
#endif
|
||||
|
||||
@@ -13,7 +13,7 @@ chip soc/intel/cannonlake
|
||||
[PchSerialIoIndexSPI1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
|
||||
[PchSerialIoIndexUART1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUART1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
|
||||
}"
|
||||
|
||||
@@ -182,16 +182,49 @@ chip soc/intel/cannonlake
|
||||
},
|
||||
}"
|
||||
|
||||
# PCIe port 7 for LAN
|
||||
# PCIe root port 7 for LAN
|
||||
register "PcieRpEnable[6]" = "1"
|
||||
register "PcieRpLtrEnable[6]" = "1"
|
||||
# PCIe port 11 (x2) for NVMe hybrid storage devices
|
||||
register "PcieRpEnable[10]" = "1"
|
||||
register "PcieRpLtrEnable[10]" = "1"
|
||||
# Uses CLK SRC 0
|
||||
register "PcieClkSrcUsage[0]" = "6"
|
||||
register "PcieClkSrcClkReq[0]" = "0"
|
||||
|
||||
# PCIe root port 8 for WLAN
|
||||
register "PcieRpEnable[7]" = "1"
|
||||
register "PcieRpLtrEnable[7]" = "1"
|
||||
# Uses CLK SRC 3
|
||||
register "PcieClkSrcUsage[3]" = "7"
|
||||
register "PcieClkSrcClkReq[3]" = "3"
|
||||
|
||||
# PCIe root port 9 for SSD (PCIe Lanes 9-12)
|
||||
register "PcieRpEnable[8]" = "1"
|
||||
register "PcieRpLtrEnable[8]" = "1"
|
||||
# RP 9 uses CLK SRC 1
|
||||
register "PcieClkSrcUsage[1]" = "8"
|
||||
register "PcieClkSrcClkReq[1]" = "1"
|
||||
|
||||
# PCIe root port 10-12 disabled
|
||||
register "PcieRpEnable[9]" = "0"
|
||||
register "PcieRpEnable[10]" = "0"
|
||||
register "PcieRpEnable[11]" = "0"
|
||||
|
||||
# PCIe root port 13 TPU0
|
||||
register "PcieRpEnable[12]" = "1"
|
||||
register "PcieRpLtrEnable[12]" = "1"
|
||||
# RP 13 uses CLK SRC 2
|
||||
register "PcieClkSrcUsage[2]" = "12"
|
||||
register "PcieClkSrcClkReq[2]" = "2"
|
||||
|
||||
# PCIe root port 14 TPU1
|
||||
register "PcieRpEnable[13]" = "1"
|
||||
register "PcieRpLtrEnable[13]" = "1"
|
||||
# RP 14 uses CLK SRC 4
|
||||
register "PcieClkSrcUsage[4]" = "13"
|
||||
register "PcieClkSrcClkReq[4]" = "4"
|
||||
|
||||
register "PcieRpEnable[14]" = "0"
|
||||
register "PcieRpEnable[15]" = "0"
|
||||
|
||||
# GPIO for SD card detect
|
||||
register "sdcard_cd_gpio" = "vSD3_CD_B"
|
||||
|
||||
@@ -205,38 +238,35 @@ chip soc/intel/cannonlake
|
||||
chip drivers/intel/dptf
|
||||
## Active Policy
|
||||
register "policies.active[0]" = "{.target=DPTF_CPU,
|
||||
.thresholds={TEMP_PCT(90, 85),
|
||||
TEMP_PCT(85, 75),
|
||||
TEMP_PCT(80, 65),
|
||||
TEMP_PCT(75, 55),
|
||||
TEMP_PCT(70, 45),}}"
|
||||
.thresholds={TEMP_PCT(94, 0),}}"
|
||||
register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0,
|
||||
.thresholds={TEMP_PCT(50, 85),
|
||||
TEMP_PCT(47, 75),
|
||||
TEMP_PCT(45, 65),
|
||||
TEMP_PCT(42, 55),
|
||||
TEMP_PCT(39, 45),}}"
|
||||
.thresholds={TEMP_PCT(72, 90),
|
||||
TEMP_PCT(68, 80),
|
||||
TEMP_PCT(62, 70),
|
||||
TEMP_PCT(54, 60),
|
||||
TEMP_PCT(46, 50),
|
||||
TEMP_PCT(39, 40),}}"
|
||||
|
||||
## Passive Policy
|
||||
register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 93, 5000)"
|
||||
register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)"
|
||||
register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)"
|
||||
register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000)"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)"
|
||||
register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)"
|
||||
register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN)"
|
||||
|
||||
## Power Limits Control
|
||||
# PL1 is fixed at 15W, avg over 28-32s interval
|
||||
# 25-64W PL2 in 1000mW increments, avg over 28-32s interval
|
||||
# 51-51W PL2 in 1000mW increments, avg over 28-32s interval
|
||||
register "controls.power_limits.pl1" = "{
|
||||
.min_power = 15000,
|
||||
.max_power = 15000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 200,}"
|
||||
.granularity = 125,}"
|
||||
register "controls.power_limits.pl2" = "{
|
||||
.min_power = 25000,
|
||||
.max_power = 64000,
|
||||
.min_power = 51000,
|
||||
.max_power = 51000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 1000,}"
|
||||
@@ -333,15 +363,13 @@ chip soc/intel/cannonlake
|
||||
device usb 3.3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Rear Left""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 0)"
|
||||
device usb 3.4 on end
|
||||
# USB3 Port 5 is not populated
|
||||
device usb 3.4 off end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Rear Middle""
|
||||
register "desc" = ""USB3 M.2 HDMI-to-USB""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||
register "group" = "ACPI_PLD_GROUP(2, 0)"
|
||||
device usb 3.5 on end
|
||||
end
|
||||
end
|
||||
@@ -351,22 +379,9 @@ chip soc/intel/cannonlake
|
||||
# RFU - Reserved for Future Use.
|
||||
end # I2C #0
|
||||
device pci 15.1 off end # I2C #1
|
||||
device pci 15.2 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""1AF80175""
|
||||
register "name" = ""PS17""
|
||||
register "desc" = ""Parade PS175""
|
||||
device i2c 4a on end
|
||||
end
|
||||
end # I2C #2, PCON PS175.
|
||||
device pci 15.3 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC2142""
|
||||
register "name" = ""RTD2""
|
||||
register "desc" = ""Realtek RTD2142""
|
||||
device i2c 4a on end
|
||||
end
|
||||
end # I2C #3, Realtek RTD2142.
|
||||
device pci 15.2 off end # I2C #2, PCON PS175.
|
||||
device pci 15.3 off end # I2C #3, Realtek RTD2142.
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 19.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
@@ -381,9 +396,9 @@ chip soc/intel/cannonlake
|
||||
device i2c 1a on end
|
||||
end
|
||||
end #I2C #4
|
||||
device pci 1a.0 on end # eMMC
|
||||
device pci 1c.6 on
|
||||
chip drivers/net
|
||||
device pci 1a.0 on end # eMMC
|
||||
device pci 1c.6 on # PCI Root Port 7 (LAN)
|
||||
chip drivers/net # RTL8111H Ethernet NIC
|
||||
register "customized_leds" = "0x05af"
|
||||
register "wake" = "GPE0_DW1_07" # GPP_C7
|
||||
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)"
|
||||
@@ -393,8 +408,26 @@ chip soc/intel/cannonlake
|
||||
register "device_index" = "0"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # RTL8111H Ethernet NIC
|
||||
device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe)
|
||||
end
|
||||
device pci 1c.7 on # PCI Root Port 8 (WLAN)
|
||||
register "PcieRpSlotImplemented[7]" = "1" # M.2 Slot
|
||||
end
|
||||
device pci 1d.0 on # PCI Root Port 9 (SSD)
|
||||
register "PcieRpSlotImplemented[8]" = "1" # M.2 Slot
|
||||
end
|
||||
device pci 1d.1 off end # PCI Root Port 10 (Not connected)
|
||||
device pci 1d.2 off end # PCI Root Port 11 (Not connected)
|
||||
device pci 1d.3 off end # PCI Root Port 12 (Not connected)
|
||||
device pci 1d.4 on # PCI Root Port 13 (TPU0)
|
||||
register "PcieRpSlotImplemented[12]" = "1" # M.2 Slot
|
||||
end
|
||||
device pci 1d.5 on # PCI Root Port 14 (TPU1)
|
||||
register "PcieRpSlotImplemented[13]" = "1" # M.2 Slot
|
||||
end
|
||||
device pci 1d.6 on end # PCI Root Port 15 (non-root)
|
||||
device pci 1d.7 on end # PCI Root Port 16 (non-root)
|
||||
device pci 1e.0 on end # UART #0
|
||||
device pci 1e.1 on end # UART #1
|
||||
device pci 1e.3 off end # GSPI #1
|
||||
end
|
||||
|
||||
|
||||
Reference in New Issue
Block a user