skl mainboards/dt: Move genx_dec settings into LPC device scope

Change-Id: Iecb4851bedb7c9ed7793763d80acbcbb068e8832
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83172
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Marvin Evers <marvin.n.evers@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/51nb/x210/devicetree.cb

@@ -26,9 +26,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x000c0681"
-	register "gen2_dec" = "0x000c1641"
-
 	# Disable DPTF
 	register "dptf_enable" = "0"
 
@@ -114,6 +111,9 @@ chip soc/intel/skylake
 		device ref pcie_rp4	on  end
 		device ref pcie_rp9	on  end
 		device ref lpc_espi	on
+			register "gen1_dec" = "0x000c0681"
+			register "gen2_dec" = "0x000c1641"
+
 			chip ec/51nb/npce985la0dx
 				device pnp 0c09.0 on end
 				device pnp 4e.5   on end

src/mainboard/facebook/monolith/devicetree.cb

@@ -18,11 +18,6 @@ chip soc/intel/skylake
 	register "lpc_iod" = "0x0070"
 	register "lpc_ioe" = "LPC_IOE_COMA_EN | LPC_IOE_COMB_EN | LPC_IOE_EC_62_66"
 
-	# CPLD host command ranges are in 0x280-0x2BF
-	# EC PNP registers are at 0x6e and 0x6f
-	register "gen1_dec" = "0x003c0281"
-	register "gen3_dec" = "0x0004006d"
-
 	# LPC serial IRQ
 	register "serirq_mode" = "SERIRQ_CONTINUOUS"
 
@@ -221,6 +216,11 @@ chip soc/intel/skylake
 		device ref uart0	on  end
 		device ref emmc		on  end
 		device ref lpc_espi	on
+			# CPLD host command ranges are in 0x280-0x2BF
+			# EC PNP registers are at 0x6e and 0x6f
+			register "gen1_dec" = "0x003c0281"
+			register "gen3_dec" = "0x0004006d"
+
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/google/eve/devicetree.cb

@@ -29,12 +29,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# FSP Configuration
 	register "DspEnable" = "1"
 	register "IoBufferOwnership" = "3"
@@ -379,6 +373,12 @@ chip soc/intel/skylake
 		end
 		device ref emmc		on  end
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/fizz/variants/baseboard/devicetree.cb

@@ -52,12 +52,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -407,6 +401,12 @@ chip soc/intel/skylake
 		end
 		device ref sdxc		on  end
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/glados/devicetree.cb

@@ -27,10 +27,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -97,6 +93,10 @@ chip soc/intel/skylake
 		device ref uart0	on  end
 		device ref emmc		on  end
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/google/poppy/variants/atlas/devicetree.cb

@@ -27,12 +27,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_B"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -363,6 +357,12 @@ chip soc/intel/skylake
 		device ref sdio 		off end
 		device ref sdxc 		off end
 		device ref lpc_espi		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/poppy/variants/baseboard/devicetree.cb

@@ -18,12 +18,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -372,6 +366,12 @@ chip soc/intel/skylake
 		device ref sdio			off end
 		device ref sdxc			on  end
 		device ref lpc_espi		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/poppy/variants/nami/devicetree.cb

@@ -27,12 +27,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -463,6 +457,12 @@ chip soc/intel/skylake
 		device ref sdio			off end
 		device ref sdxc			off end
 		device ref lpc_espi		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/poppy/variants/nautilus/devicetree.cb

@@ -27,12 +27,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -410,6 +404,12 @@ chip soc/intel/skylake
 		device ref sdio 		off end
 		device ref sdxc 		on  end
 		device ref lpc_espi 		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/poppy/variants/nocturne/devicetree.cb

@@ -20,12 +20,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -401,6 +395,12 @@ chip soc/intel/skylake
 		device ref sdio 		off end
 		device ref sdxc 		off end
 		device ref lpc_espi		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/poppy/variants/rammus/devicetree.cb

@@ -27,12 +27,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -376,6 +370,12 @@ chip soc/intel/skylake
 		device ref sdio 		off end
 		device ref sdxc			on  end
 		device ref lpc_espi		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/google/poppy/variants/soraka/devicetree.cb

@@ -27,12 +27,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-	# EC memory map range is 0x900-0x9ff
-	register "gen3_dec" = "0x00fc0901"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -355,6 +349,12 @@ chip soc/intel/skylake
 		device ref sdio		 	off end
 		device ref sdxc		 	on  end
 		device ref lpc_espi		on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+			# EC memory map range is 0x900-0x9ff
+			register "gen3_dec" = "0x00fc0901"
+
 			chip ec/google/chromeec
 				device pnp 0c09.0 on end
 			end

src/mainboard/intel/kblrvp/variants/baseboard/devicetree.cb

@@ -13,9 +13,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -127,6 +124,10 @@ chip soc/intel/skylake
 		device ref emmc		on  end
 		device ref sdxc		on  end
 		device ref smbus	on  end
+		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+		end
 		device ref fast_spi	on  end
 	end
 end

src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb

@@ -3,9 +3,6 @@ chip soc/intel/skylake
 	# GPE configuration
 	register "gpe0_dw0" = "GPP_C"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen2_dec" = "0x000c0201"
-
 	# FSP Configuration
 	register "DspEnable" = "1"
 
@@ -123,6 +120,9 @@ chip soc/intel/skylake
 		device ref pcie_rp9	on  end # x1 WLAN
 		device ref pcie_rp10	on  end # x1 WIGIG
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen2_dec" = "0x000c0201"
+
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb

@@ -10,9 +10,6 @@ chip soc/intel/skylake
 	register "deep_s5_enable_ac" = "1"
 	register "deep_s5_enable_dc" = "1"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen2_dec" = "0x000c0201"
-
 	# VR Settings Configuration for 4 Domains
 	#+----------------+-------+-------+-------+-------+
 	#| Domain/Setting |  SA   |  IA   | GTUS  |  GTS  |
@@ -164,6 +161,9 @@ chip soc/intel/skylake
 		device ref pcie_rp5	on  end
 		device ref pcie_rp6	on  end
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen2_dec" = "0x000c0201"
+
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/intel/kunimitsu/devicetree.cb

@@ -13,10 +13,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
-	register "gen1_dec" = "0x00fc0801"
-	register "gen2_dec" = "0x000c0201"
-
 	# Enable DPTF
 	register "dptf_enable" = "1"
 
@@ -235,6 +231,10 @@ chip soc/intel/skylake
 		device ref emmc		on end
 		device ref sdxc		on end
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+			register "gen1_dec" = "0x00fc0801"
+			register "gen2_dec" = "0x000c0201"
+
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/libretrend/lt1000/devicetree.cb

@@ -25,10 +25,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x007c0a01" # EC 0xa00-0xa7f
-	register "gen2_dec" = "0x000c03e1" # COM3 port 0x3e0 - 0x3ef
-	register "gen3_dec" = "0x00fc02e1" # COM2/4/5/6 ports 0x2e0 - 0x2ff
-
 	# Disable DPTF
 	register "dptf_enable" = "0"
 
@@ -173,6 +169,9 @@ chip soc/intel/skylake
 		device ref pcie_rp11	on  end
 		device ref pcie_rp12	on  end
 		device ref lpc_espi	on
+			register "gen1_dec" = "0x007c0a01" # EC 0xa00-0xa7f
+			register "gen2_dec" = "0x000c03e1" # COM3 port 0x3e0 - 0x3ef
+			register "gen3_dec" = "0x00fc02e1" # COM2/4/5/6 ports 0x2e0 - 0x2ff
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/protectli/vault_kbl/devicetree.cb

@@ -12,11 +12,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x00fc0201"
-	register "gen2_dec" = "0x007c0a01"
-	register "gen3_dec" = "0x000c03e1"
-	register "gen4_dec" = "0x001c02e1"
-
 	register "eist_enable" = "1"
 
 	# Disable DPTF
@@ -202,6 +197,10 @@ chip soc/intel/skylake
 				"SlotLengthShort" "WIFI1" "SlotDataBusWidth1X"
 		end
 		device ref lpc_espi	on
+			register "gen1_dec" = "0x00fc0201"
+			register "gen2_dec" = "0x007c0a01"
+			register "gen3_dec" = "0x000c03e1"
+			register "gen4_dec" = "0x001c02e1"
 			chip superio/ite/it8772f
 				register "TMPIN1.mode" = "THERMAL_RESISTOR"
 				register "TMPIN2.mode" = "THERMAL_RESISTOR"

src/mainboard/purism/librem_skl/devicetree.cb

@@ -34,9 +34,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	# EC host command ranges are in 0x380-0x383 & 0x80-0x8f
-	register "gen1_dec" = "0x00000381"
-
 	# Disable DPTF
 	register "dptf_enable" = "0"
 
@@ -153,6 +150,8 @@ chip soc/intel/skylake
 		device ref pcie_rp5	on  end
 		device ref pcie_rp9	on  end
 		device ref lpc_espi	on
+			# EC host command ranges are in 0x380-0x383 & 0x80-0x8f
+			register "gen1_dec" = "0x00000381"
 			chip drivers/pc80/tpm
 				device pnp 0c31.0 on end
 			end

src/mainboard/razer/blade_stealth_kbl/devicetree.cb

@@ -15,9 +15,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x000c0681"
-	register "gen2_dec" = "0x000c1641"
-
 	# Disable DPTF
 	register "dptf_enable" = "0"
 
@@ -175,6 +172,9 @@ chip soc/intel/skylake
 		device ref pcie_rp5	on  end
 		device ref pcie_rp9	on  end
 		device ref lpc_espi	on
+			register "gen1_dec" = "0x000c0681"
+			register "gen2_dec" = "0x000c1641"
+
 			chip superio/ite/it8528e
 				device pnp 6e.1 off end
 				device pnp 6e.2 off end

src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb

@@ -8,9 +8,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x007c0a01"	# Super IO SWC
-	register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
-
 	# Additional FSP Configuration
 	# This board has an IGD with no output.
 	register "PrimaryDisplay" = "Display_Auto"
@@ -83,6 +80,9 @@ chip soc/intel/skylake
 			smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthLong" "PCH SLOT4 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X"
 		end
 		device ref lpc_espi on
+			register "gen1_dec" = "0x007c0a01"	# Super IO SWC
+			register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
+
 			chip drivers/ipmi
 				# On cold boot it takes a while for the BMC to start the IPMI service
 				register "wait_for_bmc" = "1"

src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb

@@ -8,9 +8,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x007c0a01"	# Super IO SWC
-	register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
-
 	# FIXME: find out why FSP crashes without this
 	register "PchHdaVcType" = "Vc1"
 
@@ -67,6 +64,9 @@ chip soc/intel/skylake
 			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2 2280" "SlotDataBusWidth4X"
 		end
 		device ref lpc_espi on
+			register "gen1_dec" = "0x007c0a01"	# Super IO SWC
+			register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
+
 			chip drivers/ipmi
 				use pch_gpio as gpio_dev
 				register "post_complete_gpio" = "GPP_B20"

src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb

@@ -8,9 +8,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x007c0a01"	# Super IO SWC
-	register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
-
 	device domain 0 on
 		subsystemid 0x15d9 0x0896 inherit
 		device ref south_xhci on
@@ -84,6 +81,9 @@ chip soc/intel/skylake
 			end
 		end
 		device ref lpc_espi on
+			register "gen1_dec" = "0x007c0a01"	# Super IO SWC
+			register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
+
 			chip drivers/ipmi
 				use pch_gpio as gpio_dev
 				register "bmc_jumper_gpio" = "GPP_D22" # JPB1

src/mainboard/supermicro/x11-lga1151-series/variants/x11ssw-f/overridetree.cb

@@ -8,9 +8,6 @@ chip soc/intel/skylake
 	register "gpe0_dw1" = "GPP_D"
 	register "gpe0_dw2" = "GPP_E"
 
-	register "gen1_dec" = "0x007c0a01"	# Super IO SWC
-	register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
-
 	# Additional FSP Configuration
 	# This board has an IGD with no output.
 	register "PrimaryDisplay" = "Display_Auto"
@@ -71,6 +68,9 @@ chip soc/intel/skylake
 			end
 		end
 		device ref lpc_espi on
+			register "gen1_dec" = "0x007c0a01"	# Super IO SWC
+			register "gen2_dec" = "0x000c0ca1"	# IPMI KCS
+
 			chip drivers/ipmi
 				# On cold boot it takes a while for the BMC to start the IPMI service
 				register "wait_for_bmc" = "1"