skl mainboards/dt: Move SATA related settings into SATA device scope

Change-Id: I50706d7a077767d2295d6d5f209c30109d607277
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83179
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Marvin Evers <marvin.n.evers@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/51nb/x210/devicetree.cb

@@ -30,15 +30,6 @@ chip soc/intel/skylake
 	register "dptf_enable" = "0"
 
 	# FSP Configuration
-	register "SataSalpSupport" = "1"
-
-	# The X210 has 3 SATA ports: a full SATA port, mSATA, and SATA over M.2
-	register "SataPortsEnable[0]" = "1"
-	register "SataPortsEnable[1]" = "1"
-	register "SataPortsEnable[2]" = "1"
-	register "SataPortsDevSlp[0]" = "1"
-	register "SataPortsDevSlp[1]" = "1"
-	register "SataPortsDevSlp[2]" = "1"
 	register "DspEnable" = "0"
 	register "IoBufferOwnership" = "0"
 	register "SkipExtGfxScan" = "1"
@@ -106,7 +97,21 @@ chip soc/intel/skylake
 		end
 		device ref thermal	on  end
 		device ref heci1	on  end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataSalpSupport" = "1"
+
+			# The X210 has 3 SATA ports: a full SATA port, mSATA, and SATA over M.2
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+			}"
+			register "SataPortsDevSlp" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+			}"
+		end
 		device ref pcie_rp3	on  end
 		device ref pcie_rp4	on  end
 		device ref pcie_rp9	on  end

src/mainboard/facebook/monolith/devicetree.cb

@@ -32,11 +32,6 @@ chip soc/intel/skylake
 	register "SkipExtGfxScan" = "1"
 	register "SaGv" = "SaGv_Enabled"
 
-	register "SataSalpSupport" = "1"
-	register "SataPortsEnable" = "{
-		[0] = 1,
-	}"
-
 	# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
 	# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
 	register "PmConfigSlpS3MinAssert" = "2"
@@ -209,7 +204,10 @@ chip soc/intel/skylake
 		device ref south_xdci	on  end
 		device ref thermal	on  end
 		device ref heci1	on  end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataSalpSupport" = "1"
+			register "SataPortsEnable[0]" = "1"
+		end
 		device ref pcie_rp3	on  end # x1 baseboard WWAN
 		device ref pcie_rp6	on  end # x1 baseboard i210
 		device ref pcie_rp9	on  end # x4 FPGA

src/mainboard/google/fizz/variants/baseboard/devicetree.cb

@@ -59,9 +59,6 @@ chip soc/intel/skylake
 	register "s0ix_enable" = true
 
 	# FSP Configuration
-	register "SataPortsEnable[0]" = "1"
-	register "SataPortsEnable[1]" = "1"
-	register "SataPortsDevSlp[1]" = "1"
 	register "DspEnable" = "1"
 	register "IoBufferOwnership" = "3"
 	register "SkipExtGfxScan" = "1"
@@ -359,7 +356,13 @@ chip soc/intel/skylake
 		device ref i2c0		on  end
 		device ref i2c2		on  end
 		device ref heci1	on  end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+			}"
+			register "SataPortsDevSlp[1]" = "1"
+		end
 		device ref uart2	on  end
 		device ref i2c5		on  end
 		device ref pcie_rp1	on  end

src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb

@@ -47,17 +47,6 @@ chip soc/intel/skylake
 	register "SsicPortEnable" = "1"
 
 
-	register "SataSalpSupport" = "1"
-	register "SataPortsEnable" = "{
-		[0] = 1,
-		[1] = 1,
-		[2] = 1,
-		[3] = 1,
-		[4] = 1,
-		[5] = 1,
-		[6] = 1,
-		[7] = 1,
-	}"
 	register "SerialIoDevMode" = "{
 		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
 		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
@@ -112,7 +101,19 @@ chip soc/intel/skylake
 		device ref sa_thermal	off end
 		device ref i2c2		off end
 		device ref i2c3		off end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataSalpSupport" = "1"
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+				[3] = 1,
+				[4] = 1,
+				[5] = 1,
+				[6] = 1,
+				[7] = 1,
+			}"
+		end
 		device ref i2c4		off end
 		device ref emmc		off end
 		device ref sdxc		off end

src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb

@@ -1,11 +1,5 @@
 chip soc/intel/skylake
 
-	register "SataPortsEnable" = "{
-		[0] = 1,
-		[1] = 1,
-		[2] = 1,
-	}"
-
 	# Enable deep Sx states
 	register "deep_s5_enable_ac" = "1"
 	register "deep_s5_enable_dc" = "1"
@@ -155,7 +149,13 @@ chip soc/intel/skylake
 		end
 		device ref i2c2		off end
 		device ref i2c3		off end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+			}"
+		end
 		device ref pcie_rp3	on  end
 		device ref pcie_rp4	on  end
 		device ref pcie_rp5	on  end

src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb

@@ -98,18 +98,6 @@ chip soc/intel/skylake
 
 	register "SsicPortEnable" = "1" # Enable SSIC for WWAN
 
-	register "SataSalpSupport" = "1"
-	register "SataPortsEnable" = "{
-		[0] = 1,
-		[1] = 1,
-		[2] = 1,
-		[3] = 1,
-		[4] = 1,
-		[5] = 1,
-		[6] = 1,
-		[7] = 1,
-	}"
-
 	# Must leave UART0 enabled or SD/eMMC will not work as PCI
 	register "SerialIoDevMode" = "{
 		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
@@ -164,7 +152,19 @@ chip soc/intel/skylake
 		end
 		device ref i2c2		off end
 		device ref i2c3		off end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataSalpSupport" = "1"
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+				[3] = 1,
+				[4] = 1,
+				[5] = 1,
+				[6] = 1,
+				[7] = 1,
+			}"
+		end
 		device ref i2c4		off end
 		device ref pcie_rp1	off end
 		device ref pcie_rp3	on  end

src/mainboard/intel/saddlebrook/devicetree.cb

@@ -130,17 +130,6 @@ chip soc/intel/skylake
 
 	# Must leave UART0 enabled or SD/eMMC will not work as PCI
 
-	register "SataSalpSupport" = "1"
-	register "SataPortsEnable" = "{
-		[0] = 1,
-		[1] = 1,
-		[2] = 1,
-		[3] = 1,
-		[4] = 1,
-		[5] = 1,
-		[6] = 1,
-		[7] = 1,
-	}"
 	register "SerialIoDevMode" = "{
 		[PchSerialIoIndexI2C0]	= PchSerialIoPci,
 		[PchSerialIoIndexI2C1]	= PchSerialIoPci,
@@ -205,7 +194,19 @@ chip soc/intel/skylake
 		device ref i2c2		on end
 		device ref i2c3		on end
 		device ref heci1	on end
-		device ref sata		on end
+		device ref sata		on
+			register "SataSalpSupport" = "1"
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+				[3] = 1,
+				[4] = 1,
+				[5] = 1,
+				[6] = 1,
+				[7] = 1,
+			}"
+		end
 		device ref uart2	on end
 		device ref i2c5		on end
 		device ref i2c4		on end

src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb

@@ -8,8 +8,6 @@ chip soc/intel/skylake
 	register "PcieRpEnable[ 3]" = "1"
 	register "PcieRpEnable[11]" = "1"
 
-	register "SataPortsEnable[3]"	= "1"
-
 	device domain 0 on
 		device ref south_xhci on
 			register "usb2_ports" = "{
@@ -26,6 +24,9 @@ chip soc/intel/skylake
 				[3] = USB3_PORT_DEFAULT(OC1),
 			}"
 		end
+		device ref sata		on
+			register "SataPortsEnable[3]"	= "1"
+		end
 		device ref pcie_rp1	on  end
 		device ref pcie_rp2	on  end
 		device ref pcie_rp3	on  end

src/mainboard/libretrend/lt1000/devicetree.cb

@@ -29,12 +29,6 @@ chip soc/intel/skylake
 	register "dptf_enable" = "0"
 
 	# FSP Configuration
-	register "SataPortsEnable" = "{
-		[0] = 1,
-		[1] = 1,
-		[2] = 1,
-	}"
-	register "SataSpeedLimit" = "2"
 	register "DspEnable" = "1"
 	register "IoBufferOwnership" = "0"
 	register "SkipExtGfxScan" = "1"
@@ -154,7 +148,14 @@ chip soc/intel/skylake
 		device ref south_xdci	on  end
 		device ref thermal	on  end
 		device ref heci1	on  end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+			}"
+			register "SataSpeedLimit" = "2"
+		end
 		device ref pcie_rp3	on  end
 		device ref pcie_rp5	on
 			smbios_slot_desc "SlotTypePciExpressMini52pinWithoutBSKO"

src/mainboard/protectli/vault_kbl/devicetree.cb

@@ -101,10 +101,6 @@ chip soc/intel/skylake
 	# Send an extra VR mailbox command for the PS4 exit issue
 	register "SendVrMbxCmd" = "2"
 
-	# Enable SATA ports 1,2
-	register "SataPortsEnable[0]" = "1"
-	register "SataPortsEnable[1]" = "1"
-
 	# Enable Root ports. 1-6 for LAN and Root Port 9
 	register "PcieRpEnable[0]" = "1"
 	register "PcieRpEnable[1]" = "1"
@@ -183,7 +179,12 @@ chip soc/intel/skylake
 			}"
 		end
 		device ref heci1	on  end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+			}"
+		end
 		device ref pcie_rp1	on  end
 		device ref pcie_rp2	on  end
 		device ref pcie_rp3	on  end

src/mainboard/purism/librem_skl/devicetree.cb

@@ -38,8 +38,6 @@ chip soc/intel/skylake
 	register "dptf_enable" = "0"
 
 	# FSP Configuration
-	register "SataPortsEnable[0]" = "1"
-	register "SataPortsEnable[2]" = "1"
 	register "DspEnable" = "0"
 	register "IoBufferOwnership" = "0"
 	register "SkipExtGfxScan" = "1"
@@ -146,7 +144,12 @@ chip soc/intel/skylake
 		device ref south_xhci	on  end
 		device ref south_xdci	on  end
 		device ref thermal	on  end
-		device ref sata		on  end
+		device ref sata		on
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[2] = 1,
+			}"
+		end
 		device ref pcie_rp5	on  end
 		device ref pcie_rp9	on  end
 		device ref lpc_espi	on

src/mainboard/supermicro/x11-lga1151-series/devicetree.cb

@@ -3,18 +3,6 @@ chip soc/intel/skylake
 	# FSP Configuration
 	register "SkipExtGfxScan" = "1"
 
-	# SATA configuration
-	register "SataSalpSupport" = "1"
-	register "SataPortsEnable" = "{
-		[0] = 1,
-		[1] = 1,
-		[2] = 1,
-		[3] = 1,
-		[4] = 1,
-		[5] = 1,
-		[6] = 1,
-		[7] = 1,
-	}"
 
 	# LPC
 	register "serirq_mode" = "SERIRQ_CONTINUOUS"
@@ -31,7 +19,19 @@ chip soc/intel/skylake
 		device ref south_xhci on end
 		device ref thermal on end
 		device ref heci1 on end
-		device ref sata on end
+		device ref sata on
+			register "SataSalpSupport" = "1"
+			register "SataPortsEnable" = "{
+				[0] = 1,
+				[1] = 1,
+				[2] = 1,
+				[3] = 1,
+				[4] = 1,
+				[5] = 1,
+				[6] = 1,
+				[7] = 1,
+			}"
+		end
 		device ref lpc_espi on
 			chip superio/common
 				device pnp 2e.0 on  end