Make the vendor name optional in the -m flashrom parameter when there's only
one board name that matches. The full syntax still works, and is required when two vendors have boards with the same names. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
@@ -23,20 +23,20 @@ Usage
|
||||
-----
|
||||
|
||||
$ flashrom [-rwvEVfh] [-c chipname] [-s exclude_start] [-e exclude_end]
|
||||
[-m vendor:part] [-l file.layout] [-i imagename] [file]
|
||||
-r | --read: read flash and save into file
|
||||
-w | --write: write file into flash (default when
|
||||
file is specified)
|
||||
-v | --verify: verify flash against file
|
||||
-E | --erase: erase flash device
|
||||
-V | --verbose: more verbose output
|
||||
-c | --chip <chipname>: probe only for specified flash chip
|
||||
-s | --estart <addr>: exclude start position
|
||||
-e | --eend <addr>: exclude end postion
|
||||
-m | --mainboard <vendor:part>: override mainboard settings
|
||||
-f | --force: force write without checking image
|
||||
-l | --layout <file.layout>: read rom layout from file
|
||||
-i | --image <name>: only flash image name from flash layout
|
||||
[-m [vendor:]part] [-l file.layout] [-i imagename] [file]
|
||||
-r | --read: read flash and save into file
|
||||
-w | --write: write file into flash (default when
|
||||
file is specified)
|
||||
-v | --verify: verify flash against file
|
||||
-E | --erase: erase flash device
|
||||
-V | --verbose: more verbose output
|
||||
-c | --chip <chipname>: probe only for specified flash chip
|
||||
-s | --estart <addr>: exclude start position
|
||||
-e | --eend <addr>: exclude end postion
|
||||
-m | --mainboard <[vendor:]part>: override mainboard settings
|
||||
-f | --force: force write without checking image
|
||||
-l | --layout <file.layout>: read rom layout from file
|
||||
-i | --image <name>: only flash image name from flash layout
|
||||
|
||||
If no file is specified, then all that happens
|
||||
is that flash info is dumped and the flash chip is set to writable.
|
||||
|
Reference in New Issue
Block a user