Add support for the LiPPERT Cool SpaceRunner-LX embedded PC board:

- PC/104+ form factor
 - AMD Geode-LX CPU/northbridge
 - AMD CS5536 southbridge
 - ITE IT8712F Super I/O

Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3710 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

targets/lippert/spacerunner-lx/Config.lb

@@ -0,0 +1,60 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 LiPPERT Embedded Computers GmbH
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+# Config file for the LiPPERT Cool SpaceRunner-LX.		--JR 10/2008
+
+target spacerunner-lx
+mainboard lippert/spacerunner-lx
+
+# HACK to get the right TSC support.
+option CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
+
+option CONFIG_COMPRESSED_PAYLOAD_NRV2B = 0
+option CONFIG_COMPRESSED_PAYLOAD_LZMA = 0
+
+## Load payload (e.g. Linux) from IDE.
+#option CONFIG_ROM_PAYLOAD = 0
+#option CONFIG_IDE = 1
+#option CONFIG_FS_PAYLOAD = 1
+#option CONFIG_FS_EXT2 = 1
+#option AUTOBOOT_DELAY = 0
+#option AUTOBOOT_CMDLINE = "hda1:/payload.elf"
+
+# Leave 36k for VSA. Board is equipped with a 1 MB SPI flash, however, due to
+# limitations of the IT8712F Super I/O, only the top 512 KB are directly mapped.
+option ROM_SIZE = (512 * 1024) - (36 * 1024)
+option FALLBACK_SIZE = ROM_SIZE
+
+#option DEFAULT_CONSOLE_LOGLEVEL = 4
+#option MAXIMUM_CONSOLE_LOGLEVEL = 4
+
+# Saves space on ROM_IMAGE_SIZE, but decompression costs a second on boot.
+option CONFIG_COMPRESS = 1
+
+romimage "image"
+	option USE_FALLBACK_IMAGE = 1
+	option ROM_IMAGE_SIZE = 64 * 1024
+	option COREBOOT_EXTRA_VERSION = ".0"
+	payload ../payload.elf
+	# If getting payload from IDE
+	# payload /dev/null
+end
+
+buildrom ./coreboot.rom ROM_SIZE "image"