kontron/ktqm77: New board
Change-Id: Ife1c0a8597c2de04773899cdd87af6b6c630906a Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3392 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Nico Huber
committed by
Ronald G. Minnich
Ronald G. Minnich
parent
a15cd66b9e
commit
efe1feda19
163
src/mainboard/kontron/ktqm77/devicetree.cb
Normal file
163
src/mainboard/kontron/ktqm77/devicetree.cb
Normal file
@@ -0,0 +1,163 @@
|
||||
chip northbridge/intel/sandybridge
|
||||
|
||||
device cpu_cluster 0 on
|
||||
chip cpu/intel/socket_rPGA989
|
||||
device lapic 0 on end
|
||||
end
|
||||
chip cpu/intel/model_206ax
|
||||
# Magic APIC ID to locate this chip
|
||||
device lapic 0xACAC off end
|
||||
|
||||
# Coordinate with HW_ALL
|
||||
register "pstate_coord_type" = "0xfe" # TODO: This is never read.
|
||||
|
||||
register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1)
|
||||
register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C3)
|
||||
register "c3_acpower" = "0" # ACPI(C3) = MWAIT(C7)
|
||||
|
||||
register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1)
|
||||
register "c2_battery" = "4" # ACPI(C2) = MWAIT(C3)
|
||||
register "c3_battery" = "0" # ACPI(C3) = MWAIT(C7)
|
||||
end
|
||||
end
|
||||
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # host bridge
|
||||
device pci 01.0 on end # PCIe Bridge x16
|
||||
device pci 02.0 on end # vga controller
|
||||
|
||||
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
|
||||
register "pirqa_routing" = "0x8b"
|
||||
register "pirqb_routing" = "0x8b"
|
||||
register "pirqc_routing" = "0x8b"
|
||||
register "pirqd_routing" = "0x8b"
|
||||
register "pirqe_routing" = "0x8b"
|
||||
register "pirqf_routing" = "0x8b"
|
||||
register "pirqg_routing" = "0x8b"
|
||||
register "pirqh_routing" = "0x8b"
|
||||
|
||||
register "ide_legacy_combined" = "0x0" # TODO: Does nothing since generations, remove from sb code?
|
||||
register "sata_ahci" = "0x1"
|
||||
# Enable all SATA ports 0-5
|
||||
register "sata_port_map" = "0x3f"
|
||||
# Set max SATA speed to 6.0 Gb/s (should be the default, anyway)
|
||||
register "sata_interface_speed_support" = "0x3"
|
||||
|
||||
# TODO: Enable generic LPC decodes...
|
||||
register "gen1_dec" = "0x001c02e1"
|
||||
#register "gen2_dec" = "0x00000000"
|
||||
#register "gen3_dec" = "0x00000000"
|
||||
#register "gen4_dec" = "0x00000000"
|
||||
|
||||
# Disable root port coalescing
|
||||
register "pcie_port_coalesce" = "0"
|
||||
|
||||
device pci 14.0 on end # USB 3.0 Controller
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 16.1 off end # Management Engine Interface 2
|
||||
device pci 16.2 off end # Management Engine IDE-R
|
||||
device pci 16.3 off end # Management Engine KT
|
||||
device pci 19.0 on end # Intel Gigabit Ethernet
|
||||
device pci 1a.0 on end # USB2 EHCI #2
|
||||
device pci 1b.0 on end # High Definition Audio
|
||||
|
||||
# Disabling 1c.0 might break IRQ settings as it enables port coalescing
|
||||
# There are two mini PCIe x1 sockets, so one PCIe port is unrouted
|
||||
device pci 1c.0 on end # PCIe Port #1 mini PCIe x1?
|
||||
device pci 1c.1 on end # PCIe Port #2 mini PCIe x1?
|
||||
device pci 1c.2 on end # PCIe Port #3 second Ethernet NIC
|
||||
device pci 1c.3 on end # PCIe Port #4 third Ethernet NIC
|
||||
device pci 1c.4 on end # PCIe Port #5 first Ethernet PHY
|
||||
device pci 1c.5 on end # PCIe Port #6 FireWire
|
||||
device pci 1c.6 on end # PCIe Port #7 PCIe x1
|
||||
device pci 1c.7 on end # PCIe Port #8 mini PCIe x1?
|
||||
|
||||
device pci 1d.0 on end # USB2 EHCI #1
|
||||
device pci 1e.0 off end # PCI bridge
|
||||
device pci 1f.0 on #LPC bridge
|
||||
chip superio/winbond/w83627dhg
|
||||
device pnp 2e.0 off # Floppy
|
||||
end
|
||||
device pnp 2e.1 off # Parallel Port
|
||||
end
|
||||
device pnp 2e.2 on # Com1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 on # Com2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.5 off # Keyboard
|
||||
end
|
||||
device pnp 2e.6 off # SPI
|
||||
end
|
||||
device pnp 2e.307 off # GPIO 1
|
||||
end
|
||||
device pnp 2e.8 off # WDTO#, PLED
|
||||
end
|
||||
device pnp 2e.009 on # GPIO2 -- original firmware sets this on
|
||||
end
|
||||
device pnp 2e.109 on # GPIO3 -- original firmware sets this on
|
||||
end
|
||||
device pnp 2e.209 off # GPIO4
|
||||
end
|
||||
device pnp 2e.309 off # GPIO5
|
||||
end
|
||||
device pnp 2e.a off # ACPI
|
||||
end
|
||||
device pnp 2e.b off # HWM
|
||||
end
|
||||
device pnp 2e.c off # PECI, SST
|
||||
end
|
||||
end #superio/winbond/w83627dhg
|
||||
chip ec/kontron/it8516e
|
||||
# Set CPU Fan to 50°C, System Fan to 75%
|
||||
register "default_fan_mode" = "{ IT8516E_MODE_THERMAL, IT8516E_MODE_PWM }"
|
||||
register "default_fan_target" = "{ 50, 75 }"
|
||||
|
||||
# TODO: Check status when Linux runs
|
||||
device pnp 20e.1 on # Com3
|
||||
io 0x60 = 0x03e8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 20e.2 on # Com4
|
||||
io 0x60 = 0x02e8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 20e.4 off # System Wakeup
|
||||
end
|
||||
device pnp 20e.5 on # Mouse
|
||||
irq 0x70 = 12
|
||||
end
|
||||
device pnp 20e.6 on # Keyboard
|
||||
io 0x60 = 0x0060
|
||||
io 0x62 = 0x0064
|
||||
irq 0x70 = 1
|
||||
end
|
||||
device pnp 20e.f off # Shared Memory
|
||||
end
|
||||
device pnp 20e.10 off # BRAM / RTC
|
||||
end
|
||||
device pnp 20e.11 on # PM channel 1
|
||||
io 0x60 = 0x0062
|
||||
io 0x62 = 0x0066
|
||||
irq 0x70 = 0
|
||||
end
|
||||
device pnp 20e.12 on # PM channel 2
|
||||
io 0x60 = 0x020c
|
||||
io 0x62 = 0x020d
|
||||
irq 0x70 = 0
|
||||
end
|
||||
device pnp 20e.17 off # PM channel 3
|
||||
end
|
||||
end #ec/kontron/it8516e
|
||||
# TODO: TPM on 4e
|
||||
end # LPC bridge
|
||||
device pci 1f.2 on end # SATA Controller 1
|
||||
device pci 1f.3 on end # SMBus
|
||||
device pci 1f.5 off end # SATA Controller 2
|
||||
device pci 1f.6 off end # Thermal
|
||||
end
|
||||
end
|
||||
end
|
||||
Reference in New Issue
Block a user