libpayload: rename i386 to x86

Change-Id: Ia9170bd3d04e76dbf9321ca7ea4be23b5e468d21
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2033
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

payloads/libpayload/arch/x86/timer.c

@@ -0,0 +1,124 @@
+/*
+ * This file is part of the libpayload project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/**
+ * @file i386/timer.c
+ * i386 specific timer routines
+ */
+
+#include <libpayload.h>
+#include <arch/rdtsc.h>
+
+/**
+ * @ingroup arch
+ * Global variable containing the speed of the processor in KHz.
+ */
+u32 cpu_khz;
+
+/**
+ * Calculate the speed of the processor for use in delays.
+ *
+ * @return The CPU speed in kHz.
+ */
+unsigned int get_cpu_speed(void)
+{
+	unsigned long long start, end;
+
+	/* Set up the PPC port - disable the speaker, enable the T2 gate. */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/* Set the PIT to Mode 0, counter 2, word access. */
+	outb(0xB0, 0x43);
+
+	/* Load the counter with 0xffff. */
+	outb(0xff, 0x42);
+	outb(0xff, 0x42);
+
+	/* Read the number of ticks during the period. */
+	start = rdtsc();
+	while (!(inb(0x61) & 0x20)) ;
+	end = rdtsc();
+
+	/*
+	 * The clock rate is 1193180 Hz, the number of milliseconds for a
+	 * period of 0xffff is 1193180 / (0xFFFF * 1000) or .0182.
+	 * Multiply that by the number of measured clocks to get the kHz value.
+	 */
+	cpu_khz = (unsigned int)((end - start) * 1193180U / (1000 * 0xffff));
+
+	return cpu_khz;
+}
+
+static inline void _delay(unsigned long long delta)
+{
+	unsigned long long timeout = rdtsc() + delta;
+	while (rdtsc() < timeout) ;
+}
+
+/**
+ * Delay for a specified number of nanoseconds.
+ *
+ * @param n Number of nanoseconds to delay for.
+ */
+void ndelay(unsigned int n)
+{
+	_delay((unsigned long long)n * cpu_khz / 1000000);
+}
+
+/**
+ * Delay for a specified number of microseconds.
+ *
+ * @param n Number of microseconds to delay for.
+ */
+void udelay(unsigned int n)
+{
+	_delay((unsigned long long)n * cpu_khz / 1000);
+}
+
+/**
+ * Delay for a specified number of milliseconds.
+ *
+ * @param m Number of milliseconds to delay for.
+ */
+void mdelay(unsigned int m)
+{
+	_delay((unsigned long long)m * cpu_khz);
+}
+
+/**
+ * Delay for a specified number of seconds.
+ *
+ * @param s Number of seconds to delay for.
+ */
+void delay(unsigned int s)
+{
+	int i;
+	for (i=0; i<1000; i++)
+		_delay((unsigned long long)s * cpu_khz);
+}