soc/mediatek/mt8186: Enable mmu operation for L2C SRAM and DMA

1. Turn off L2C SRAM and reconfigure as L2 cache
   Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
   After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
   the L2C SRAM as L2 cache.

2. Configure DMA buffer in DRAM
   Set DRAM DMA to be non-cacheable to load blob correctly.

TEST=build pass
BUG=b:202871018

Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If56d29cdd7d9dfaed05e129754aa1f887a581482
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>

src/soc/mediatek/mt8186/Makefile.inc

@@ -22,6 +22,7 @@ romstage-y += ../common/cbmem.c
 romstage-y += emi.c
 romstage-y += ../common/flash_controller.c
 romstage-y += ../common/gpio.c gpio.c
+romstage-y += ../common/mmu_operations.c ../common/mmu_cmops.c
 romstage-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c
 romstage-y += ../common/timer.c timer.c
 romstage-y += ../common/uart.c
@@ -31,6 +32,7 @@ romstage-y += ../common/pmic_wrap.c pmic_wrap.c mt6366.c
 ramstage-y += emi.c
 ramstage-y += ../common/flash_controller.c
 ramstage-y += ../common/gpio.c gpio.c
+ramstage-y += ../common/mmu_operations.c ../common/mmu_cmops.c
 ramstage-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c
 ramstage-y += soc.c
 ramstage-y += ../common/timer.c timer.c

src/soc/mediatek/mt8186/include/soc/mcucfg.h

@@ -942,6 +942,6 @@ check_member(mt8186_mcucfg_regs, mcusys_reserved_reg1_rd, 0x7ff4);
 check_member(mt8186_mcucfg_regs, mcusys_reserved_reg2_rd, 0x7ff8);
 check_member(mt8186_mcucfg_regs, mcusys_reserved_reg3_rd, 0x7ffc);
 
-static struct mt8186_mcucfg_regs *const mt8186_mcucfg = (void *)MCUCFG_BASE;
+static struct mt8186_mcucfg_regs *const mtk_mcucfg = (void *)MCUCFG_BASE;
 
 #endif  /* SOC_MEDIATEK_MT8186_MCUCFG_H */

src/soc/mediatek/mt8186/pll.c

@@ -425,13 +425,13 @@ void mt_pll_init(void)
 	setbits32(&mtk_topckgen->clk_misc_cfg_0, ARMPLL_DIVIDER_PLL1_EN);
 	setbits32(&mtk_topckgen->clk_misc_cfg_0, ARMPLL_DIVIDER_PLL2_EN);
 
-	clrsetbits32(&mt8186_mcucfg->cpu_plldiv_cfg0, MCU_DIV_MASK, MCU_DIV_1);
+	clrsetbits32(&mtk_mcucfg->cpu_plldiv_cfg0, MCU_DIV_MASK, MCU_DIV_1);
-	clrsetbits32(&mt8186_mcucfg->cpu_plldiv_cfg1, MCU_DIV_MASK, MCU_DIV_1);
+	clrsetbits32(&mtk_mcucfg->cpu_plldiv_cfg1, MCU_DIV_MASK, MCU_DIV_1);
-	clrsetbits32(&mt8186_mcucfg->bus_plldiv_cfg, MCU_DIV_MASK, MCU_DIV_1);
+	clrsetbits32(&mtk_mcucfg->bus_plldiv_cfg, MCU_DIV_MASK, MCU_DIV_1);
 
-	clrsetbits32(&mt8186_mcucfg->cpu_plldiv_cfg0, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
+	clrsetbits32(&mtk_mcucfg->cpu_plldiv_cfg0, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
-	clrsetbits32(&mt8186_mcucfg->cpu_plldiv_cfg1, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
+	clrsetbits32(&mtk_mcucfg->cpu_plldiv_cfg1, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
-	clrsetbits32(&mt8186_mcucfg->bus_plldiv_cfg, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
+	clrsetbits32(&mtk_mcucfg->bus_plldiv_cfg, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
 
 	write32(&mt8186_infracfg_ao->infra_bus_dcm_ctrl, 0x805f0603);
 	write32(&mt8186_infracfg_ao->peri_bus_dcm_ctrl, 0xb07f0603);
@@ -450,7 +450,7 @@ void mt_pll_init(void)
 void mt_pll_raise_little_cpu_freq(u32 freq)
 {
 	/* switch clock source to intermediate clock */
-	clrsetbits32(&mt8186_mcucfg->cpu_plldiv_cfg0, MCU_MUX_MASK, MCU_MUX_SRC_26M);
+	clrsetbits32(&mtk_mcucfg->cpu_plldiv_cfg0, MCU_MUX_MASK, MCU_MUX_SRC_26M);
 
 	/* disable armpll_ll frequency output */
 	clrbits32(plls[APMIXED_ARMPLL_LL].reg, MT8186_PLL_EN);
@@ -463,13 +463,13 @@ void mt_pll_raise_little_cpu_freq(u32 freq)
 	udelay(PLL_EN_DELAY);
 
 	/* switch clock source back to armpll_ll */
-	clrsetbits32(&mt8186_mcucfg->cpu_plldiv_cfg0, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
+	clrsetbits32(&mtk_mcucfg->cpu_plldiv_cfg0, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
 }
 
 void mt_pll_raise_cci_freq(u32 freq)
 {
 	/* switch clock source to intermediate clock */
-	clrsetbits32(&mt8186_mcucfg->bus_plldiv_cfg, MCU_MUX_MASK, MCU_MUX_SRC_26M);
+	clrsetbits32(&mtk_mcucfg->bus_plldiv_cfg, MCU_MUX_MASK, MCU_MUX_SRC_26M);
 
 	/* disable ccipll frequency output */
 	clrbits32(plls[APMIXED_CCIPLL].reg, MT8186_PLL_EN);
@@ -482,7 +482,7 @@ void mt_pll_raise_cci_freq(u32 freq)
 	udelay(PLL_EN_DELAY);
 
 	/* switch clock source back to ccipll */
-	clrsetbits32(&mt8186_mcucfg->bus_plldiv_cfg, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
+	clrsetbits32(&mtk_mcucfg->bus_plldiv_cfg, MCU_MUX_MASK, MCU_MUX_SRC_PLL);
 }
 
 u32 mt_fmeter_get_freq_khz(enum fmeter_type type, u32 id)

src/soc/mediatek/mt8186/soc.c

@@ -2,6 +2,7 @@
 
 #include <device/device.h>
 #include <soc/emi.h>
+#include <soc/mmu_operations.h>
 #include <symbols.h>
 
 static void soc_read_resources(struct device *dev)
@@ -11,6 +12,7 @@ static void soc_read_resources(struct device *dev)
 
 static void soc_init(struct device *dev)
 {
+	mtk_mmu_disable_l2c_sram();
 }
 
 static struct device_operations soc_ops = {