Revert "src/mainboard: Add Star Labs labtop series"

This reverts commit 2e665eb8da.

Reason for revert: Was submitted too early and out-of-order.

Change-Id: I119b7a81b849bbe3424d73d5fdf9b55481444686
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54971
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Tim Wawrzynczak
2021-06-04 18:34:45 +00:00
committed by Patrick Georgi
parent fc7900b6b9
commit fb1858539f
46 changed files with 0 additions and 2163 deletions

View File

@@ -169,10 +169,6 @@ The boards in this section are not real mainboards, but emulators.
- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
## Star Labs Systems
- [Labtop Mk IV / StarBook Mk V](starlabs/labtop.md)
## Supermicro
- [X10SLM+-F](supermicro/x10slm-f.md)

View File

@@ -1,174 +0,0 @@
# Star Labs LabTop
## Specs
- CPU (full processor specs available at https://ark.intel.com)
- Intel i7-10710U (Comet Lake)
- Intel i3-10110U (Comet Lake)
- Intel i7-8550u (Kaby Lake Refresh)
- EC
- ITE IT8987E
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend / resume
- GPU
- Intel UHD Graphics 620
- GOP driver is recommended, VBT is provided
- eDP 13-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- 16GB on-board for Comet Lake platforms[^1]
- 8GB on-board for Kaby Lake Refresh platform.
- Networking
- AX201 CNVi WiFi / Bluetooth soldered to PCBA (Comet Lake)
- 8265 PCIe WiFi / Bluetooth soldered to PCBA (Kaby Lake Refresh)
- Sound
- Realtek ALC256
- Internal speakers
- Internal microphone
- Combined headphone / microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe SSD
- RTS5129 MicroSD card reader
- USB
- 1280x720 CCD camera
- USB 3.1 Gen 2 Type-C (left)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
[^1] The Comet Lake PCB supports multiple memory variations that are based on hardware configuration resistors see `src/mainboard/starlabs/labtop/variants/cml/romstage.c`
## Building coreboot
### Preliminaries
Prior to building coreboot the following files are required:
Comet Lake and Kaby Lake configurations:
- Intel Flash Descriptor file (descriptor.bin)
- Intel Management Engine firmware (me.bin)
Comet Lake configuration only:
- ITE IT8987E firmware (it8987-x.xx.bin)
All Star Labs platforms:
- Splash screen image in Windows 3.1 BMP format (Logo.bmp)
These files exist in the correct location in the StarLabsLtd/blobs repo on GitHub which is used in place of the standard 3rdparty/blobs repo.
### Build
The following commands will build a working image:
##### LabTop Mk IV (Comet Lake)
```bash
make distclean
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_labtop_cml
make
```
##### LabTop Mk III (Kaby Lake)
```bash
make distclean
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_labtop_kbl
make
```
## Flashing coreboot
```eval_rst
+---------------------+------------+
| Type | Value |
+=====================+============+
| Socketed flash | no |
+---------------------+------------+
| Vendor | Winbond |
+---------------------+------------+
| Model | 25Q128JVSQ |
+---------------------+------------+
| Size | 16 MiB |
+---------------------+------------+
| Package | SOIC-8 |
+---------------------+------------+
| Internal flashing | yes |
+---------------------+------------+
| External flashing | no |
+---------------------+------------+
#### **Requirements:**
* Only available on Star Labtop Mk IV and Star LabTop Mk III
* fwupd version 1.5.6 or later
* The battery must be charged to at least 30%
* The charger must be connected (either USB-C or DC Jack)
* BIOS Lock must be disabled
* Supported Linux distribution (Ubuntu 20.04 +, Linux Mint 20.1 + elementaryOS 6 +, Manjaro 21+)
**fwupd 1.5.6 or later**
To check the version of **fwupd** you have installed, open a terminal window and enter the below command:
```
fwupdmgr --version
```
This will show the version number. **1.5.6** or greater will work.
![fwupd version](https://cdn.shopify.com/s/files/1/2059/5897/files/fwupdV.png?v=1611136423)
On Ubuntu 20.04, Ubuntu 20.10, Linux Mint 20.1 and elementaryOS 6, fwupd 1.5.6 can be installed from our PPA with the below terminal commands:
```
sudo add-apt-repository ppa:starlabs/ppa
sudo apt update
sudo apt install fwupd
```
On Manjaro:
```
sudo pacman -Sy fwupd-git flashrom-starlabs
```
Instructions for other distributions will be added once fwupd 1.5.6 is available. If you are not using one of the distributions listed above, it is possible to install coreboot using a Live USB.
**Disable BIOS Lock**
BIOS Lock must be disabled when switching from the standard AMI (American Megatrends Inc.) firmware to coreboot. To disable BIOS Lock:
1\. Start with your LabTop turned off\. Turn it on whilst holding the **F2** key to access the BIOS settings.
2\. When the BIOS settings load, use the arrow keys to navigate to the advanced tab\. Here you will see BIOS Lock\.
3\. Press `Enter` to change this setting from **Enabled** to **Disabled**
![Disable BIOS Lock](https://cdn.shopify.com/s/files/1/2059/5897/files/IMG_20210120_094049709_1.jpg?v=1611139567)
4\. Next, press the `F10` key to **Save & Exit** and then `Enter` to confirm.
#### **Switching Branch**
Switching branch refers to changing from AMI firmware to coreboot, or vice versa.
First, check for new firmware files with the below terminal command:
```
fwupdmgr refresh --force
```
Then, to change branch, enter the below terminal command:
```
fwupdmgr switch-branch
```
You can then select which branch you would like to use, by typing in the corresponding number:
![Switch Branch](https://cdn.shopify.com/s/files/1/2059/5897/files/SwitchBranch.png?v=1611138496)
You will be prompted to confirm, press `y` to continue or `n` to cancel.
Once the switch has been completed, you will be prompted to restart.
![Installed coreboot](https://cdn.shopify.com/s/files/1/2059/5897/files/Complete.png?v=1611138934)
The next reboot can take up to **5 minutes,** do not interrupt this process or disconnect the charger. Once the reboot is complete, that's it - you'll continue to receive updates for whichever branch you are using.
You can switch branch at any time.