Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with
PCI_{DID,VID}_ using the commands below, which also take care of some
spacing issues. An additional clean up of pci_ids.h is done in
CB:61531.
Used commands:
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g'
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g'
Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Instead of using raw integers to indicate success/failure, enum cb_err
can be used to makes things clearer, so this patch converts most
functions to return that instead of int.
TEST=boot to OS on google/dratini, no TPM errors seen
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ifb749c931fe008b16d42fcf157af820ec8fbf5ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Turns out 200ms still isn't enough in the worst reset conditions.
There's been some reports of failures at 200ms with some older
cr50 versions. Let's not take any chances and bump this way up
since if this fails, it prevents boot.
BUG=b:213828947
BRANCH=None
TEST=Reboot and suspend_stress on Nipperkin
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5be0a80c064546fd277f66135abc9d0572df11cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Since commit 7cd8ba6eda (console: Add loglevel prefix to interactive
consoles) on the very first boot some errors occur because no MRC data
is present in the MRC cache. This is normal because the memory training
is not done yet.
This patch changes the loglevel to BIOS_NOTICE which will prevent an
error in the log in this case.
Change-Id: I1e36590e33507515e5b9dd4eb361b3dbe165511e
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61973
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add a new configuration parameter "enable_aspm_l1_2".
Write value 0xe059000f to register offset 0xb0 to allow kernel driver to
enable ASPM L1.2.
Use Kconfig "PCIEXP_ASPM" and "enable_aspm_l1_2" to decide whether to
enable ASPM L1.2.
BUG=b:204309459
TEST=emerge and test if the driver can read the correct value
Change-Id: I944dbf04d3ca19df4de224540bee538bff4d1f12
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Guard macro via CONFIG_INTEL_GMA_ADD_VBT, rather than guarding
each of the calls to it (most of which are currently unguarded).
Test: build google/coral w/ and w/o CONFIG_INTEL_GMA_ADD_VBT selected,
verify VBTs added (or not) to CBFS based on Kconfig selection.
Change-Id: Ic25554cb2c61b81bdb4b0987094c3558e0bbcbd8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This new chip driver will be used for attaching ACPI properties to PCIe
endpoints. The first property it supports is "UntrustedDevice." This
property can be used by a payload to, e.g., restrict the device to its
own IOMMU domain for security purposes. The new property is added by
adding a _DSD and an integer property set to 1.
Example of the property from google/brya0:
Scope (\_SB.PCI0.RP01)
{
Device (DEV0)
{
Name (_ADR, 0x0000000000000000) // _ADR: Address
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"UntrustedDevice",
One
}
}
})
}
}
BUG=b:215424986
TEST=boot patch train on google/brya0, dump SSDT, see above for snippet
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I53986614dcbf4d10a6bb4010e131f5ff5a9d25cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Support PXSX._RST and PXSX.MRST._RST for warm and cold reset.
PXSX._RST is invoked on driver removal.
build dependency:
soc/intel/common/block/pcie/rtd3
This driver will use the rtd3 methods for the same parent in the device
tree. The rtd3 chip needs to be added on the same root port in the
devicetree separately.
Test:
Add chip entry to the corresponding root port and check PXSX Device
is generated in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1e0b9fd405f6cfb1e216ea27558bb9299a09e566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61354
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
UART8250_FCR_RXSR is a redefinition of UART8250_FCR_CLEAR_RCVR,
UART8250_FCR_TXSR a redefinition of UART8250_FCR_CLEAR_XMIT and
UART8250_LCR_BKSE a redefinition of UART8250_LCR_DLAB. None of those
redefinitions are used, so just drop them.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b9edae67180b04ff1c887c5742c07c774fc9c59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The Linux kernel has the idea of an "untrusted" PCI device, which may
have limited I/O and memory access permissions, depending on which IOMMU
domains it may be a part of.
https://crrev.com/c/3406512 is a backport to the ChromiumOS kernel which
checks for this property.
BUG=b:215424986
TEST=dump SSDT on google/redrix, verify it contains the expected
UntrustedDevice property
Change-Id: I1a02ca7c5f717097ec97cf6373b9e0b81a13e05d
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
The speed control bits of the Designware I2C controller are bits 1 and 2
in the control register, so the values should be written as number
shifted by the number of the first bit. The resulting constant is
identical.
TEST=Timeless build for amd/chausie results in identical binary
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0881dfcd7703ab6a70a9b1a355d5a93771aebc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch aligns fsp_header with the Intel specification 2.0 and 2.3.
The main impetus for this change is to make the fsp_info_header fully
accessible in soc/vendor code. Here items such as image_revision can be
checked.
TEST=verify image revision output in the coreboot serial log.
compare to FSP version shown in serial debug output.
verify Google Guybrush machine boots into OS.
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Change-Id: Ibf50f16b5e9793d946a95970fcdabc4c07289646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Using enum cb_err as return type instead of int improves the readability
of the code. This commit only changes the return value of the static
functions in this file keeping the external interface identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I80300e0b24591fc660c3134139b9257e002cdbbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Current max count for camera power ops is 5 which is not sufficient.
If we increase the ops by 1 in current variants the compiler
will not throw error for intel mipi camera driver.
Hence increase current max count for camera power ops to 6 from 5.
BUG=b:214665783
TEST=Build and boot to OS
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I4f4c090f2275616816dfc697f27520cd1cbc1a80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61146
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without acpi name, acpi_device_path will return NULL.
<NULL>: Intel USB4 Retimer at GENERIC: 0.0
Replace with usb4_retimer_scope for the identify.
BUG=b:215742472
TEST=show below meaasge in coreboot log
\_SB.PCI0.TMD0.HR : Intel USB4 Retimer at GENERIC: 0.0
\_SB.PCI0.TMD1.HR : Intel USB4 Retimer at GENERIC: 0.0
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idfa8b204894409b11936e5f221c218daa206cc02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The FSP API is used to notify the FSP about different phases in the
boot process. The current FSP specification supports three notify
phases:
- Post PCI enumeration
- Ready to Boot
- End of Firmware
This patch attempts to make calling into the FSP Notify Phase APIs
optional by using native coreboot implementations to perform the
required lock down and chipset register configuration prior boot to
payload.
BUG=b:211954778
TEST=Able to build brya without any compilation issue and coreboot
log with this code changes when SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT
and SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE config enabled.
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia95e9ec25ae797f2ac8e1c74145cf21e59867d64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Turns out 150ms isn't enough in the worst reset conditions. On guybrush
the TPM is reset in S0i3 and the CR50 is allowed to hibernate. The CR50
is woken up and initialized early during S0i3 resume. Occasionally the
CR50 isn't ready before the probe times out.
BUG=b:213828947
BRANCH=None
TEST=suspend_stress_test -c 1000
Change-Id: Ifda438080cf1ad2796c7061223a6a97b8e6e9987
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Keith Short <keithshort@chromium.org>
FSP 2.3 specification introduces following changes:
1. FSP_INFO_HEADER changes
Updated SpecVersion from 0x22 to 0x23
Updated HeaderRevision from 5 to 6
Added ExtendedImageRevision
FSP_INFO_HEADER length changed to 0x50
2. Added FSP_NON_VOLATILE_STORAGE_HOB2
Following changes are implemented in the patch to support FSP 2.3:
- Add Kconfig option
- Update FSP build binary version info based on ExtendedImageRevision
field in header
- New NV HOB related changes will be pushed as part of another patch
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ica1bd004286c785aa8a431f39d8efc69982874c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
