This patch adds the functionality to write the DXIO and DDI descriptors
to the UPD data structure to the SoC code and adds the
mainboard_get_dxio_ddi_descriptors function to each mainboard using the
Cezanne SoC that gets called to get the descriptors from the board code.
Change-Id: I1cb36addcf0202cd56ce99e610a13d6d230bc981
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The UPD header files get generated as part of the FSP build process. For
the initial Cezanne development we took the Picasso UPD data structures
as a starting point. This patch replaces it with the first version of
the Cezanne-specific UPD data structures that is present in version 12
of the internal work-in-progress FSP binary drops.
The serial_port_stride UPD-M field is removed, since the information is
already given by serial_port_use_mmio. The stride is 4 bytes for the
MMIO UART case and 1 byte for the legacy I/O case.
BUG=b:182524631
TEST=NVMe works on google/guybrush when the rest of the patch train is
applied as well.
Change-Id: Idca235029bf2e68d403230d55308820cab61a6c0
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
On VCCin there was an oscillation which occurred just as the kernel
started (kernel starting... message). On some devices, this behavior
seems even worse. In previous platforms VCCin toggled for a few ms
and then was stable. For volteer, this happens at the same point in
time for around 40ms. However, it starts oscillating again later in
the boot sequence. Once at the root shell, it seems to oscillate
indefinitely at around 100-200Hz (very variable though). To fix this
we need to control the deep C-state voltage slew rate.We have options
for controlling the deep C-state voltage slew rate through FSP UPDs.
This patch expose the following FSP UPD interface into coreboot:
- AcousticNoiseMitigation
- FastPkgCRampDisable
- SlowSlewRate
We are setting SlowSlewRate for all volteer boards to 2 which is Fast/8.
TGL has a single VR domain(Vccin). Hence, the chip config is updated to
allow mainboards to set a single value instead of an array and FSP UPDs
are accordingly set.
BUG=b:153015585
BRANCH=firmware-volteer-13672.B
TEST= Measure the change in noise level by changing the UPD values.
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Change-Id: Ica7f1f29995df33bdebb1fd55169cdb36f329ff8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
From Skylake/Sunrise Point onwards, there are two BIOS_CNTL registers:
one on the LPC/eSPI PCI device, and another on the SPI PCI device. When
the WPD bit changes from 0 to 1 and the LE bit is set, the PCH raises a
TCO SMI with the BIOSWR_STS bit set. However, the BIOSWR_STS bit is not
set when the TCO SMI comes from the SPI or eSPI controller instead, but
a status bit in the BIOS_CNTL register gets set. If the SMI cause is not
handled, another SMI will happen immediately after returning from the
SMI handler, which results in a deadlock.
Prevent deadlocks by clearing the SPI synchronous SMI status bit in the
SMI handler. When SPI raises a synchronous SMI, the TCO_STS bit in the
SMI_STS register is continously set until the SPI synchronous SMI status
bit is cleared. To not risk missing any other TCO SMIs, do not clear the
TCO_STS bit again in the same SMI handler invocation. If the TCO_STS bit
remains set when returning from SMM, another SMI immediately happens and
clears the TCO_STS bit, handling any pending events.
SPI can also generate asynchronous SMIs when the WPD bit is cleared and
one attempts to write to flash using SPI hardware sequencing. This patch
does not account for SPI asynchronous SMIs, because they are disabled by
default and cannot be enabled once the BIOS Interface Lock-Down bit in
the BIOS_CNTL register has been set, which coreboot already does. These
asynchronous SMIs set the SPI_STS bit of the SMI_STS register. Clearing
the SPI asynchronous SMI source should be done inside the SPI_STS SMI
handler, which is currently not implemented. All of this goes out of the
scope of this patch, and is currently not necessary anyway.
This patch does not handle eSPI because I cannot test it, and knowing if
a board uses LPC or eSPI from common code is currently not possible, and
this is beyond the scope of what this commit tries to achieve (fix SPI).
Tested on HP 280 G2, no longer deadlocks when SMM BIOS write protection
is on. Write protection will be enforced in a follow-up.
Change-Id: Iec498674ae70f6590c33a6bf4967876268f2b0c8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50754
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TPM_INIT is disabled by default. This prevents TPM to be operational
when VBOOT is disabled.
Remove the TPM_INIT disable.
BUG=N/A
TEST=tested on facebook monolith with VBOOT disabled.
Change-Id: I84d525a18c84643903922fef0a11dcf98abbbe4d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
This patch changes the mem_pool implementation to track the last two
allocations (instead of just the last) and allow them both to be freed
if the mem_pool_free() calls come in in reverse order. This is intended
as a specific optimization for the CBFS cache case when a compressed
file is mapped on a platform that doesn't natively support
memory-mapping flash. In this case, cbfs_map() (chaining through to
_cbfs_alloc() with allocator == NULL) will call
mem_pool_alloc(&cbfs_cache) to allocate space for the uncompressed file
data. It will then call cbfs_load_and_decompress() to fill that
allocation, which will notice the compression and in turn call
rdev_mmap_full() to map the compressed data (which on platforms without
memory-mapped flash usually results in a second call to
mem_pool_alloc(&cbfs_cache)). It then runs the decompression algorithm
and calls rdev_munmap() on the compressed data buffer (the latter one in
the allocation sequence), leading to a mem_pool_free(). The remaining
buffer with the uncompressed data is returned out of cbfs_map() to the
caller, which should eventually call cbfs_unmap() to mem_pool_free()
that as well. This patch allows this simple case to succeed without
leaking any permanent allocations on the cache. (More complicated cases
where the caller maps other files before cbfs_unmap()ing the first one
may still lead to leaks, but those are very rare in practice.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic5c4c56a8482752ed65e10cf35565f9b2d3e4b17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
RETURN_FROM_VERSTAGE is a somewhat tricky construct that we don't
normally do otherwise in coreboot. While it works remarkably well in
general, new development can lead to unintentional interactions with
confusing results. This patch adds a debug print to the verstage right
before returning to the bootblock so that it's obvious this happens,
because otherwise in some cases the last printout in the verstage is
about some TPM commands which can be misleading when execution hangs
after that point.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9ca68a32d7a50c95d9a6948d35816fee583611bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52086
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CBFS_VERIFICATION requires the CBFS metadata hash anchor to be linked
into an uncompressed stage, but for platforms using COMPRESS_BOOTBLOCK,
this is only the decompressor stage. The first CBFS accesses are made in
the bootblock stage after decompression, so if we want to make
CBFS_VERIFICATION work on those platforms, we have to pass the metadata
hash anchor from the decompressor into the bootblock. This patch does
just that. (Note that this relies on the decompressor data remaining
valid in memory for as long as the metadata hash anchor is needed. This
is always true even for OVERLAP_DECOMPRESSOR_ROMSTAGE() situations
because the FMAP and CBFS metadata necessarily need to have finished
verification before a new stage could be loaded.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2e6d7384cfb8339a24369eb6c01fc12f911c974e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52085
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds file data hashing for CONFIG_CBFS_VERIFICATION. With
this, all CBFS accesses using the new CBFS APIs (cbfs_load/_map/_alloc
and variants) will be fully verified when verification is enabled. (Note
that some use of legacy APIs remains and thus the CBFS_VERIFICATION
feature is not fully finished.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic9fff279f69cf3b7c38a0dc2ff3c970eaa756aa8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
With the last external user to cbfs_load_and_decompress() gone, we can
stop exporting this function to the rest of coreboot and make it local
to cbfs.c. Also remove a couple of arguments that no longer really make
a difference and fold the stage-specific code for in-place LZ4
decompression into cbfs_prog_stage_load().
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4b459650a28e020c4342a66090f55264fbd26363
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These p-suffixed helpers allow dropping pointer casts in call-sites,
which is particularly useful when accessing registers at an offset from
a base address. Move existing helpers in chipset code to arch/mmio.h and
create the rest accordingly.
Change-Id: I36a015456f7b0af1f1bf2fdff9e1ccd1e3b11747
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51862
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 023fdaffd1 (mb/asus/p2b: Refactor southbridge ACPI stuff)
moved the southbridge ACPI stuff to its own file. It also
(prematurely) listed PM and SMBus I/O port ranges as a #defined
fixed value.
Since these two ranges are not expected to change at runtime anyway,
we can simply drop the ASL code doing the read.
Change-Id: Id5adb37d047621d7c8faf81607ceea4cbcac3d34
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41093
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Haswell MRC.bin can return zero even when raminit did not complete
successfully. When this happens, the memory controller will not have
acknowledged raminit: the mc_init_done_ack bit in the MC_INIT_STATE_G
register will be zero, and memory accesses will lock up the system.
To handle this situation more gracefully, check the mc_init_done_ack bit
after running MRC. If the bit is not set, log a fatal error and halt.
Tested on Asrock B85M Pro4:
- With badly-seated DIMMs, MRC raminit fails and coreboot dies.
- After reseating the DIMMs, the board still boots successfully.
Change-Id: I144bf827f65cd0be319c44bf3d407ddc116b129d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
