This change updates the Atmel touchscreen ACPI node to use PRP0001 as
_HID to allow OF-style compatible string matching for enumeration.
Reason for this change: Atmel touchscreen driver in Linux kernel looks
for "compatible" property to decide if it is okay to attach to the
device. This check seems to be a protection against old firmware in
the field that do not have the right properties.
BUG=b:129162037
TEST=Verified that touchscreen works on Kohaku.
Change-Id: I6d027f8533494e903efd1da8da1fa273a97fe9b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The only platform-specific difference in mtk_dsi_phy_clk_setting is how
to configure MIPI TX because those registers (and logic) are quite
different across different SOCs.
The calculation of data rate is actually the same so we should isolate
it and move to common, and rename mtk_dsi_phy_clk_setting to a better
name as mtk_dsi_configure_mipi_tx.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I894dc2c4c053267debf5a58313b2bb489bcf5f3a
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The 'bpp' was referred to both 'bits per pixel' and 'bytes per pixel' in
MTK DSI driver and should be corrected. By this change we now always
consider 'bpp' as 'bits per pixel', and rename the variables for other
cases.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ibd405220b73859e5592c68f498af07eef8d7edbc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34770
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DSI initialization is almost the same for 8173 and 8183, so we want
to move most of common functions into common/dsi.c.
The major board-specific functions left are:
- reset (controller register has different format)
- pin_drv_ctrl (8183 does not need this)
BUG=b:80501386,b:117254947
TEST=make -j # board=oak (mt8173)
Change-Id: I8d4369a3c84db551287a9c9d1b22f552c5f7518d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34769
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is easier to track CAR_GLOBAL_MIGRATION which is
the approach to be deprecated with the next release.
This change enforces new policy; POSTCAR_STAGE=y is
not allowed together with CAR_GLOBAL_MIGRATION=y.
Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build error on missing vb2ex_printf() in bootblock stage
Add the file vboot_logic.c which contains the missing vb2ex_printf().
BUG=N/A
TEST=Boot Linux 4.20 and verify logging on Facebook FBG-1701
Change-Id: I3f649f3faf1e812d592e4981bc75698e2cad1cc8
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
The Kohaku V24 schematic adds two additional temperature sensors
to the EC. Add these to the DPTF tables.
Cq-Depend: chromium:1742914
BRANCH=none
BUG=b:138578073
TEST=Rebuild EC and BIOS, look for new thermal sensors in kernel.
1. Build EC
``cd ~/trunk/src/platform/ec``
``make -j BOARD=kohaku``
2. Program EC
``./util/flash_ec --board=kohaku``
3. Reboot device
4. Rebuild BIOS
``cd ~/trunk/src/third_party/coreboot``
``FEATURES="noclean" FW_NAME=kohaku emerge-hatch chromeos-ec depthcharge
vboot_reference libpayload coreboot-private-files intel-cmlfsp
coreboot-private-files-hatch coreboot chromeos-bootimage``
5. Use flashrom to program the BIOS
6. Reboot device
7. Log into the root console (ctrl-alt-F2 or servo)
8. Example thermal sensor information
``grep . /sys/class/thermal/t*/type``
Look for "TSR0" through "TSR3" in the output.
Change-Id: Ib8f38beae6392855927ce1249c229d7a114c72b2
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34765
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Oops, I missed this in the last CL.
The pin needs to be configured as owned by GPIO, so that the kernel
driver can bind it with an IRQ.
BUG=b:139165490
TEST=Ensure kernel nastygram about inability to claim the IRQ is gone
Change-Id: I26c08d75d8b4e3b834db6e90868239899605fa5b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In general, third party code (such as vboot) doesn't know what the
underlying types are for the integers in <stdint.h>, so these macros are
useful for portably printing them. Of these definitions, coreboot so far
has only used PRIu64 (in one place), which isn't needed anymore since we
know what the underlying type of a u64 is.
Change-Id: I9e3a300f9b1c38e4831b030ff8af3fed2fa60f14
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Change the stoneyridge definitions into picasso. The named 0 and 1
buses are controlled by the PSP and not directly accessible by host
firmware. I2C4 operates only in slave mode so is not added to to
the bus clear-after-reset sequence.
The I2C controller is fundamentally the same as on Stoney Ridge so
the ability to clear a potentially jammed bus is still required.
Program Picasso's new pad control registers in the MISC AcpiMmio
space according to the recommended settings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ibbc5504ebc36654e28c79fe3ae17cc0d9255118f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This is a consolidation of the respective feature in `soc/intel/*lake/`,
including additional support for MAINBOARD_POWER_STATE_PREVIOUS.
For the latter, firmware has to keep track of the `previous` state. The
feature was already advertised in Kconfig long ago, but not implemented.
SoC code has to call pmc_set_power_failure_state() at least once during
boot and needs to implement pmc_soc_set_afterg3_en() for the actual
register write.
Change-Id: Ic6970a79d9b95373c2855f4c92232d2aa05963bb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The MT8183 SOC has a DISP (display controller) that supports
overlay, read/write DMA, ... etc. The output of DISP goes to
display interface DSI, DPI or DBI directly.
Reference: MT8183 Application Processor Functional Spec,
6.1 Display Controller
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic4aecc58d081f14f5d136b9ff8e813e6f40f78eb
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The 'dual DSI mode' was never used by any real boards running coreboot
and is introducing lots of complexity when it comes to refactoring.
In order to create a common display stack for MTK SOCs, we want to first
drop dual DSI mode so 8173 and 8183 DSI/DDP implementation will be more
similar to each other.
BUG=b:80501386,b:117254947
TEST=emerge-oak coreboot
Change-Id: I357c30cc687803ca8045d0b055dec2e22eef4291
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34693
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Sarien.
Change-Id: Ibc336be0523ff4e65a818474907faf20fc417ff4
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Arcada.
Change-Id: I1915b974b10638b0f6ab97c6fb9b7a58d2cabc59
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
