In commit e59f18bf29 ("drivers/i2c: Add PI7C9X2G608GP PCIe switch
driver (pi608gp)"), there were some suggestions after it's been already
merged.
This patch addresses the points regarding the number types - fix of the
printk format strings, inclusion of 'stdint.h' and marking the set of
allowed values as constant.
BUG=none
TEST=Build OK, no behavioral changes in the pi608gp driver, console logs
without changes.
Change-Id: I34c664f6a8a257b260facdbf9043825ff4a4c932
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75500
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
This makes sure that the resource allocator won't use this address range
for anything else. In the systems I looked at, this was between the end
of the above 4GB memory and the beginning of the above 4GB PCI BAR MMIO
region, but better reserve it here so nothing else will get allocated
there if this expectation isn't met.
TEST=Reserved region is printed in the console logs:
update_constraints: PCI: 00:00.0 09 base fd00000000 limit fdffffffff mem (fixed)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5a8150873cb019ca1d903ed269e18d6f9fabb871
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch reduces the redundant config check to understand if an ISH FW
partition is available and to fetch the ISH FW version.
The goal is to fetch the ISH FW version if the ISH FW belongs to the CSE
firmware partition table.
Change-Id: I689a71377e7aea0fa3bc1835f355708c33c2caea
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75811
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` config
to `SOC_INTEL_STORE_ISH_FW_VERSION` to ensure the usage of this config
is clear.
Any platform would like to fetch the currently running ISH firmware
version should select this configuration.
TEST=Able to build and boot google/marasov.
Change-Id: Ie503d6a5bf5bd0d3d561355b592e75b22c910bf5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75767
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Boxy audio codec chip uses ALC5682I-VD, not ALC5682I-VS.
It needs to modify codec HID to "10EC5682" in coreboot to fix audio no
output sound issue.
BUG=b:286970886
BRANCH=dedede
TEST=confirm audio soundcard can be list by command "aplay -l"
Change-Id: Icd69a9d757ba817b586a703a17375682db684224
Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Sometimes systems don't boot to the OS due to wrong ACPI tables.
Printing the tables in an ACPICA compatible format makes analysis of
ACPI tables easier.
The ACPICA format (acpidump, acpixtract) is the following:
"
FACS @ 0x0000000000000000
0000: 46 41 43 53 40 00 00 00 E8 24 00 00 00 00 00 00 FACS@....$......
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
"
To achieve analyze ACPI tables capture the coreboot log between
"Printing ACPI in ACPICA compatible table" and "Done printing ACPI in
ACPICA compatible table". Remove the prefix "[SPEW ] " and then call
'acpixtract -a dump' to extract all the tables. Then use 'iasl -d' on
the .dat files to decompile the tables.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7b5d879014563f7a2e1f70c45cf871ba72f142dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75677
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Time elapsed for a single board build with ccache typically measures
well below 10 seconds. Improve the measurements to milliseconds
resolution using bash EPOCHREALTIME (pseudo) environment variable.
Change-Id: Iaedc470bb45cf9bb6f14ff8b37cd6f7ae3818a08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
One specific Hynix LPDDR5x DRAM part requires an ABL workaround to
eliminate DRAM-related failures during a FAFT test, but due to the
use of generic/common SPDs, there is no way for the ABL to determine
the DRAM part # itself.
Consequently, we will have coreboot check the DRAM part #, and set/clear
a CMOS bit as appropriate, which the ABL will check in order to apply
(or not apply) the workaround.
The ABL already uses byte 0xD of the extended CMOS ports 72/73 for
memory context related toggles, so we will use a spare bit there.
BUG=b:270499009, b:281614369, b:286338775
BRANCH=skyrim
TEST=run FAFT bios tests on frostflow, markarth, and whiterun without
any failures.
Change-Id: Ibb6e145f6cdba7270e0a322ef414bf1cb09c5eaa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75698
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
On nissa, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Add
DmaProperty to the ISH _DSD on joxer.
BUG=b:285477026
TEST=Kernel marks ISH (PCI device 12.0) as untrusted, and changes the
IOMMU group type to "DMA". Also, device still goes to S0i3.
Before:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
0
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA-FQ
After:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
1
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I69b00f0281f4493db157783840d9cdcbb138017f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75758
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:285477026
TEST=On joxer eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I834bd81ce636a6f32d50434cbf07b1d572620492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75757
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rename get_smee_reserved_address_bits to get_sme_reserved_address_bits
since the feature is called secure memory encryption and the last 'e' in
SMEE bit in the SYSCFG MSR just stands for enable. The function will
return a valid number of reserved address bits no matter if this is
enabled or not, so drop the second 'e'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3795f7a861e39cb6c8209fee10191f233cbcd308
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This is a complete rewrite of the UHCI root-hub driver, based on
the xHCI one. We are doing things by the book as far as possible.
One special case is uhci_rh_reset_port() which does the reset se-
quencing that usually the hardware would do.
This abandons some quirks of the old driver:
* Ports are not disabled/re-enabled for every attachment anymore.
* We solely rely on the Connect Status Change bit to track changes.
* Further status changes are now deferred to the next polling round.
The latter fixes endless loops in combination with commit 7faff543da
(libpayload: usb: Detach unused USB devices).
Change-Id: I5211728775eb94dfc23fa82ebf00fe5c99039709
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The original clock rate 416MHz is insufficient for 4K resolution and
causing the screen to glitch. Set the clock rate to 594MHz to support
4K resolution.
BUG=b:236328487
TEST=Glitching screen was fixed after applying this patch
Change-Id: Ic40dd28264d03ef7218ff4edd8d4182e0fe74ea3
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75661
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define a CMOS layout for Librem Mini v1/v2 spanning both banks. The
only setting provided is the automatic power-on setting, which is
implemented by the EC. This can now be configured in a firmware image
by replacing cmos.default in CBFS.
Since cmos.default is applied early in bootblock, the EC BRAM interface
must now be configured in bootblock, including opening the LPC I/O
range.
Change-Id: Ib0a4ea02d71f6f99e344484726a629e0552e4941
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74363
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Geralt SoC does not support 'persist certain regions' across reboots.
Considering the impact of missing ramoops for debugging, set
MEDIATEK_DRAM_SCRAMBLE to default n to disable this feature in
production FW image.
BUG=b:269049451,b:278478563
TEST=emerge-geralt coreboot and confirm CONFIG_MEDIATEK_DRAM_SCRAMBLE=n
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I109634d811a928e3e6f7f56e706a5b61a52a21ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75562
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per AMD64 Architecture Programmer's Manual, section 10.2.5 SMRAM
Protected Areas:
The TSEG range must be aligned to a 128 Kbyte boundary and the minimum
TSEG size is 128 Kbytes.
The SMM TSEG size should be less than SMM reserved size.
AMD TSEG mask works like an MTRR. It needs to be aligned to it's size
and it's size needs to be a power of 2.
Change-Id: Ic4f557c7b77db6fc5ab2783ca4e2ebe7a4476e85
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75405
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This commit introduces a refactored version of the IVRS (I/O
Virtualization Reporting Structure) table generation. The main objective
of this refactoring is to generalize the process of generating the IVRS
table based on the IOMMU (Input/Output Memory Management Unit) domains
and their corresponding resources.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: Ic471f05d6000c21081d70495b7dbd4350e68b774
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75451
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch configures external V1p05/Vnn/VnnSx rails for Joxer
to achieve the better power savings.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:285477026
TEST=Verified all the UPD values are updated with these configs.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I78d2a885d577f6c1a89ab74c0da7b6544322c0d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
