Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The headers added are generated as per FSP v3301.03
In the future, when Alder Lake and Raptor Lake fsp align, Raptor Lake
fsp headers can be deleted and Raptor Lake soc will also use headers
from alderlake/ folder.
BUG=b:243693364
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: Idbd39ed53d4ba05248a0e83c104846960253931e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
CB:66978 introduced an incorrect condition to check for the presence of
SPD binaries to be injected into APCB_SBR_D5.gen. This caused the SPDs
to be not injected into the APCB and hence the system fails to boot. Fix
it by updating the path of the SPD binaries correctly.
BUG=b:244173966
TEST=Build and boot to OS in Skyrim.
Change-Id: I5efa634fafdcc4769dfad5f533d5512e7c03644f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Set bluetooth enable_delay_ms to 200ms. 200ms is the lowest common
denominator between the two BT chipsets.
BUG=b:233369179,b:236289478
BRANCH=guybrush
TEST=Connect to headset, suspend and reboot, headset still functions
Change-Id: Id4c23de37351d28d02aaa797fa19ff49e9dfa76c
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65180
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
The current subsystem ID used by the amps may end up getting used
again for future products, therefore this CL updates the subsystem
ID to 103C8C08, which was specifically generated for this amp.
BUG=b:202484541
BRANCH=brya
TEST='FW_NAME=vell emerge-brya coreboot'
Change-Id: I399d8d99ead4fb6fdfa24c2a7a3e3d5e63603b8b
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The CPPC table value for UEFI BIOS has been changed. The code has been
merged to AGESA. We can get the value by dumping ACPI table. Then we
align the coreboot code with the new value.
BUG=b:190420984
Change-Id: I091ab3bbc5f94961f8b366a3fa00f50f5c9fa182
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Commit 0e7cf3d81d (soc/intel/alderlake:
Fix DDR5 channel mapping) fixed a bug in SoC code that messed up DDR5
SPD address mapping. Atlas uses the 0x50/0x52 addresses. However, the
SoC code bug required commit 044883615d
(mb/prodrive/atlas: Update correct SPD address) so that at least some
RAM would work. Now that the SoC code bug is fixed, the workaround is
no longer needed, so use the correct SPD address mapping.
TEST=Boot Atlas and verify that both memory channels work
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I352d8f36eec63cffd3f63ab6e7421db16ca30163
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Building futility with OpenSSL 3.0 (default in latest Debian sid)
results in a number of warnings that various declarations have been
deprecated. Since we (and futility) have warnings as errors enabled,
this causes the building of futility to fail, killing the entire
coreboot build.
To work around this until futility is updated, turn off the warnings
about deprecated declarations.
Bug 243994708 has been filed to get futility updated. This workaround
can be removed when futility builds cleanly with the latest libsssl-dev.
BUG=b:243994708
TEST=Futility build doesn't fail with libssl-dev > 3.0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I54e27e09b0d50530709864672afe35c59c76f06e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tom Hiller <thrilleratplay@gmail.com>
The size of the input parameter to RESET_SYSTEM svc call is expected to
be 4 bytes. Fix the reset_system type from enum to uint32_t.
BUG=b:243476183
TEST=Build and boot to OS in Skyrim with PSP verstage. Trigger a system
reset to ensure that the system is reset successfully.
Change-Id: I6319a1dfc89602722c1c2b1c4ee744493ae8b33f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67117
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If we have a PCIe root port without `ops_pci` or without
`get_ltr_max_latencies`, the parent device wouldn't be PCI.
Hence, check for a PCI path early.
Change-Id: I358cb6756750bb10d0a23ab7133b917bfa25988b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This workaround was added since reading the firmware version on Ti50
versions < 0.0.15 will cause the Ti50 to become unresponsive. No one is
using Ti50 this old anymore, so remove the workaround.
BUG=b:224650720,b:236911319
TEST=Boot to OS on nivviks with Ti50 0.22.4. Check the log contains the
firmware version:
[INFO ] Firmware version: Ti50/D3C1 RO_B:0.0.26/- RW_B:0.22.4/ti50_common:v095c
Change-Id: I3628b799e436a80d0512dabd356c4b2566ed600a
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The qemu package doesn't exist anymore or it was renamed. Instead of
installing QEMU for all available architectures, install only the
packages which ship architectures that are supported by coreboot.
* qemu-system-arm
* qemu-system-misc (for RISC-V)
* qemu-system-ppc
* qemu-system-x86
Change-Id: Ifc46a8c9fcb1ab3c38dc8cbbc906882e93a719d7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
When MRC_SAVE_HASH_IN_TPM is selected, mrc_data_valid() uses the TPM
hash to verify the MRC cache data, not the checksum. However, we still
calculate the checksum when updating the cache. Skip this calculation
when MRC_SAVE_HASH_IN_TPM is selected to save boot time.
On nissa, this reduces boot time by ~14 ms:
Before:
3:after RAM initialization 854,298 (28,226)
After:
3:after RAM initialization 849,626 (14,463)
Note, the reason the calculation is so slow is that the new MRC data
lives in CBMEM, which is not yet marked as cacheable in romstage.
BUG=b:242667207
TEST=MRC caching still works as expected on nivviks. After clearing
the MRC cache, memory training happens on the next boot, but doesn't on
subsequent boots.
Change-Id: Ifbb75ecfa17421c0565aec1f3eb48d950244f821
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to
run fast calibration for MT8188 using blob.
DRAM fast calibration logs:
DRAM-K: Fast calibration passed in 19530 msecs
dram size (romstage): 0x200000000
TEST=Fast calibration pass.
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
- Use common SoC drivers for DRAM calibration support.
- Remove emi.h because sdram_size() is already declared in
common/include/soc/emi.h.
- Add dramc_param.h and dramc_soc.h to prepare for implementation of
DRAM full calibration.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This patch disables LID based shutdown requests.
Google/Rex platform receives a forced shutdown request while
booting to depthcharge due to EC wrongly detecting the LID is being
closed.
For now disable the LID based shutdown behaviour in depthcharge unless
the EC issue gets resolved.
BUG=b:243920003
TEST=Depthcharge no longer sees the force shutdown request now.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I03e33ea4d04dc48331d1cf98c47786b2a184c258
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
If an inserted region's base wasn't aligned, the resulting range should
still cover the original end (original region's base + size) and not the
aligned-down base + size.
Change-Id: I8f1c9456d6dbab4fa868de5c93fa3656397e54c1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66607
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PNOT() should be called when the battery status changes, to give the SOC
an opportunity to handle it. This is in preparation for the low/no
battery boot changes.
This CL also updates the PNOT() comments to better match the name of the
function and why it's called.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Change-Id: I8b74313d242fd4959315a67579eb6c5f49a31a76
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66993
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Clear the SMBIOS region before writing SMBIOS tables.
On librem_mini and librem_mini_v2, CBMEM allocations are offset by 4K
for reboots relative to the cold boot. This means the unused SMBIOS
region could contain the first 4K of the ACPI tables from the last boot
(including the signature), which prevents Linux from booting.
The CBMEM 4K offset appears to be due to FSP allocating memory
differently between cold boot and reboot, this appears to be normal and
causes the CBMEM base address to change.
It is not clear why Linux examines an ACPI signature found in this
region, but boot logs over serial confirm that it sees the corrupt
table. The table is supposed to be found just below 1M, and kernel
source appears to look in this region, but it is definitely finding the
corrupt table in CBMEM.
Normal cold boot:
[ 0.008615] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.008619] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008624] ACPI: FACP 0x0000000099B4A2A0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008634] ACPI: DSDT 0x0000000099B48280 00201F (v02 COREv4 COREBOOT 20110725 INTL 20220331)
...
Reboot with corrupt table:
[ 0.008820] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.008823] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008828] ACPI: ???G 0x0000000099B4A2A0 20002001 (v00 ?G?$ 47020100 ?, 47020100)
[ 0.008831] ACPI: �y 0x0000000099B4A3C0 54523882 (v67 ?_HID? A�? 65520D4E al T 20656D69)
...
There are no specific errors but it returns to the firmware soon after,
presumably due to a fault. This appears to be so early in the boot
that panic=0 on the kernel command line has no effect.
Test: build/boot Librem Mini, Librem Mini v2 and reboot.
Change-Id: Ia20d0b30160e89e8d96add34d7e0e881f070ec61
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66377
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
