Vendorcode decides already in AMD_INIT_POST the exact location
of UMA memory. To meet alignment requirements, it will extend
uma_memory_size. We cannot calculate base from size and TOP_MEM1,
but need to calculate size from base and TOP_MEM1 instead.
Also allows selection of UmaMode==UMA_SPECIFIED to manually set
amount of memory reserved for framebuffer.
Change-Id: I2514c70a331c7fbf0056f22bf64f19c9374754c0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
AGESA and binaryPI boards have no easy way to determine correct
cbmem_top() location early enough when GFXUMA is enabled, so they
will use these functions with EARLY_CBMEM_INIT as well.
At the end of AmdInitPost() the decisions of UMA base and size
have not been written to hardware yet. The decisions are stored
inside AGESA heap object we cannot locate from coreboot proper
until after AmdInitEnv().
Modify code such that weak backup functions are only defined
for LATE_CBMEM_INIT; they are somewhat troublesome to handle.
Change-Id: Ifef4f75b36bc6dee6cd56d1d9164281d9b2a4f2a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19306
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the intel/common/block
* Move I2C common code from intel/common to intel/common/block.
* Split the code into common, early init and post mem init stages and put it
in lpss_i2c.c, i2c_early.c and i2c.c respectively.
* Declare functions for getting platform specific i2c bus config and
mapping bus to devfn and vice versa, that have to be implemented by SoC.
In skylake/apollolake
* Stop using code from soc/intel/common/lpss_i2c.c.
* Remove early i2c initialization code from bootblock.
* Refactor i2c.c file to implement SoC specific methods
required by the I2C IP block.
Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/19468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If there is an external 8250 UART, one needs to enable the appropriate
address ranges before console_init() is called so that the init sequence
can reach the external UART.
Furthermore FSPM needs different settings for an external UART port. For
this, the function fill_console_params() has to be adapted.
Change-Id: I62c7d0b54edd18acf793849aef352afbcaeb68b9
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/19693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The touchpad frequency was still slightly above 400kHz so tweak
the timing values manually to get under the spec limit.
BUG=b:35583133
TEST=verified the bus frequency with a scope to be < 400kHz
Change-Id: I8bd071a8e15a791b7551ac256797e87abd6b5e5a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19727
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
PCR_BASE_ADRESS may be zero if SOC Kconfig didn't define the non zero
default value.
TEST=Remove the PCR_BASE_ADDRESS config in Apollolake Kconfig file and
build.
BUG=None
Change-Id: I396aa1a3e89507c90e17229a986de5d2c0887c9c
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/19684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
disable_turbo function can be used to disable turbo mode
on each processor by settings MSR 0x1A0 bit 38.
This option will help to perform some quick test
without enabling turbo mode.
Change-Id: If3e387e16e9fa6f63cb0ffff6ab2759b447e7c5c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Put parameter comments and help text in the same order as the actual
parameters.
- Don't clone a new release tree from coreboot.org if a tree already
exists.
- Change COMMIT_ID parameter from optional to required. If it was
omitted previously, the head of the master branch would be used.
Change-Id: Ifa434a4911dec777004788e3cf4e3436875d929b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
They do 64bit accesses, and gcc does the necessary fix ups to handle
32bit values as zero-padded 64bit values.
clang, however, isn't happy with it.
Change-Id: I9c8b9fe3a1adc521e393c2e2a0216f7f425a2a3e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/19661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There is code to adjust the mapping down if a mmap fails
at a physical address. However, if the address is less
than the page size of the system then the physical offset will
underflow. This can actually cause a kernel panic on when
operating on /dev/mem.
The failing condition happens when the requested mapping at 0
fails in the kernel. The fallback path is taken and page size
is subtracted from 0 making a very large offset. The PAT code
in the kernel fails with a BUG_ON in reserve_memtype() checking
start >= end. The kernel needs to be fixed as well, but this
fallback path is wrong as well.
BUG=b:38211793
Change-Id: I32b0c15b2f1aa43fc57656d5d2d5f0e4e90e94ef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Start-point is Gigabyte GA-G41M-ES2L.
This board features a G41 northbridge and an ICH7 southbridge. This
board has slots for both DDR2 and DDR3 (cannot run concurrently
though) but only DDR2 is implemented in coreboot. The SPI flash
resides in a DIP-8 socket.
Tested and working:
* DDR2 dual channel (PC2 5300 and PC2 6400, though raminit is picky
with assymetric dimm setups);
* 3,5" IDE;
* SATA;
* PCIe x16 (with some patches up for review);
* Uart, PS2 Keyboard;
* USB, ethernet, audio;
* Native graphic init;
* Fan control;
* Reboot, poweroff, S3 resume;
* Flashrom (vendor and coreboot).
Tested but fails:
* DDR3 (not implemented in coreboot).
Tests were run with SeaBIOS and Debian sid, using Linux 4.9.0.
Change-Id: I992ee07b742dfc59733ce0f3a9be202a530ec6cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
A left-over from 5e3cb72a71 (nb/x4x: Do not enable IGD when not
supported). Should fix coverity issue 1375009. Remove a redundant
line that uses the variable `gfxsize` out of its scope and move the
variable declaration. Make sure the variable is always initialized,
drop unneeded error-handling for `get_option()` and sanitize the
read value instead.
Change-Id: Iee2beda30d8c74df0f412622c3ff3357819e386b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19680
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change is needed to minimize circuit level stress, by adjusting
circuit voltage for proper operation.
For mem config GPIO changes:
To avoid leakge as those pins have internal 20K pull and 3.3K pull down
on mainboard, change internal pull up to none.
BUG=b:37998248
TEST=Boot up into OS and enter s0ix.
Change-Id: Id82035d8e1fff9fbb8dd3b4125460cdf61a58488
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/19577
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move drivers/storage into commonlib/storage to enable access by
libpayload and indirectly by payloads.
* Remove SD/MMC specific include files from include/device
* Remove files from drivers/storage
* Add SD/MMC specific include files to commonlib/include
* Add files to commonlib/storage
* Fix header file references
* Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver
* Add Kconfig source for commonlib/storage
* Rename *DEVICE* to *COMMONLIB*
* Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE*
TEST=Build and run on Galileo Gen2
Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
`cardF[n]` should indicate whether the DIMM in channel n is of
raw card type F. However, `cardF[1]` was initialised with the
value meant for `cardF[0]`. This patch results in the correct
initialisation of `cardF`.
Tested on a Lenovo T400 containing two DIMMs: one of raw card
type F and the other of raw card type B. Before the patch, the
system would not boot. After the patch, the system boots with all
of the memory functional.
Change-Id: I7409df0b8c67d7efbdadae39dc718c8df7a92552
Signed-off-by: Tristan Corrick <tristancorrick86@gmail.com>
Reviewed-on: https://review.coreboot.org/19652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This results in raminit_receive_enable_calibration.c producing
no errors or warnings with checkpatch.
The issues fixed are:
ERROR: that open brace { should be on the previous line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Tested by compiling after making the changes.
Change-Id: I8d2f4f1fe2f17aa44c0a7090c178eee418defe78
Signed-off-by: Tristan Corrick <tristancorrick86@gmail.com>
Reviewed-on: https://review.coreboot.org/19651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The thinkpad-acpi driver uses the UCMS (CMOS) ACPI method to control the
ThinkLight from the Operating System. This patch adds partial support for
that method, enough to enable or disable the ThinkLight:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
With the original BIOS the UCMS method exposes a wide range of values
through a generic /proc/acpi/ibm/cmos interface. With the changes suggested
in this patch that interface is also exposed but only accepts the commands
to enable or disable the ThinkLight; all other commands are ignored.
This change would potentially benefit all currently supported Thinkpad
models, I only have an X201 available for tests though.
Change-Id: I80285f6630b5830766d82e3ecd174c4a51aa9066
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/19644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Only commented out code uses the variable `csr`, and GCC complains about
it, when enabling the warning *unused-but-set-variable*.
```
Checking for pciutils and zlib... me.c: In function ‘mei_dump’:
me.c:50:18: warning: variable ‘csr’ set but not used [-Wunused-but-set-variable]
struct mei_csr *csr;
^~~
```
As the code is commented, also comment out the declaration of the variable.
Change-Id: I4ecb2b5e9f32906ccfc8a0628d2e0f2d3ad39a02
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/19612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
