Introduce a helper to get the cached cr50 firmware version. This
information is in turn used to identify the strap configuration
supported by Cr50.
BUG=None
TEST=Ensure that Drawcia board boots to OS. Ensure that the version
cached cr50 firmware version is returned.
Change-Id: Id84b152993f253878a6c133cc433a0da2c990cf2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44653
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make GPIO_4 and GPIO_5 PAD_NC in ezkinil/gpio.c. None of the Ezkinil SKUs
use internal stylus and hence pen pads are configured as NC.
BUG=b:164892883, b:165342107
TEST=Verified taht pen detect GPIO does not cause spurious wakes.
BRANCH=None
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I7557575cf8b8e0f849e05bda1d69acf61e91a157
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44629
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the IT8728F datasheet it is possible to add an extra delay
between 3VSBSW# being set and PWRGD3 being set during resume from
Suspend-to-RAM. This is enabled in the special function selection
register, the default being 0.
This is also useful for the IT8720F although this chip does not have the
PWRGD3 output. On the corresponding pin it has PWROK2, which the setting
then seems to apply to.
The datasheet for the IT8720F marks the corresponding bit as reserved,
but the vendor BIOS of an Acer Aspire M3800 sets it anyway. Without
setting the bit, coreboot fails to resume from S3. Oscilloscope
measurements have shown that setting the bit increases the delay between
3VSBSW# being set and PWROK2 being set from around 1 us to 140 ms. The
actual use of PWROK2 on the board design is unclear - the only
destination it seems to reach is a pin header near the SuperIO marked as
"GPIO1".
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: I51cbf2470dc2b840a647a20090acb5a0cf4f4025
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The assumption was that the fmap cache would be initialized in
bootblock, otherwise an error is shown. This error is showing
up in psp_verstage when the fmap cache is initialized there, so
create a new ENV value for ENV_INITIAL_STAGE.
BUG=None
TEST=Boot, see that error message is gone from psp_verstage
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I142f2092ade7b4327780d423d121728bfbdab247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43488
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When booting from the RO region of a VBOOT enabled ROM, there shouldn't
be a reliance on anything outside of the RO section. This includes the
APOB_NV region (similar to the MRC cache region). By skipping the
region when setting up the BIOS Directory table, the PSP won't try to
use the region when booting.
The APOB_NV region is still used for the VBOOT RW sections.
BUG=b:158363448
TEST=Build RO with no APOB_NV region. Dump the BDT and verify that
it's not in RO, but is in RW_A & RW_B. Boot into recovery.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I13c35ba8a2331492744d2acf257db15e4a53102a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
amdfwtool currently assumes that we MUST have an apob_nv area if we
have an aopb. This is not required, so if neither the apob_nv size or
base are specified, just move on.
BUG=b:158363448
TEST=Build an image with no APOB_NV region. Dump regions to show that
it's not there.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ibaeacd3dcdfd73f690df61c2a19d39bbb9dcc838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44045
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Linux kenerl driver for AMD gpu currently has a floor
value of 12 for brightness settings (AMDGPU_DM_DEFAULT_MIN_BACKLIGHT).
AMD indicates they did this because they were concerned with certain
panels flickering at lower backlight values. However, for unaffected
panels it's desirable to be able to have the panel "turn off" at
the lowest backlight setting. The only way to do that is to provide
ATIF bindings that indicate backlight range.
Option SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF is added to provide a full
range for the backlight setting. If needed, this path can be built upon
for fuller support, but for the time being this is the only thing
necessary to make the backlight be full range.
BUG=b:163583825
Change-Id: If76801a8daf6a5e56ba7d118956f3ebce74e567a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The GDT loading did work fine on x86_64 a few months ago, but today it
only works in QEMU, but not on real hardware or KVM-enabled QEMU. This
might be related to toolchain changes.
Use 64bit GDT loading on x86_64 and force the assembler to generate a
64bit address load on the GDT. This will make sure no 32bit (signed)
displacement op is being generated, which points to the wrong address
in longmode.
Verified using readelf and made sure no R_X86_64_32S relocation symbol
is emitted. Disassembled the romstage ELF and made sure the GDT address
is 64bit in size.
Tested on QEMU and KVM-enabled QEMU: Doesn't crash any more on KVM.
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: Ia824f90d9611e6e8db09bd62a05e6f990581f09a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
IPU is required to be enabled for platform supporting MIPI camera.
IPU is by default disabled in devicetree for all variants. Enable
IPU for Waddledoo and Waddledee supporting MIPI camera.
BUG=None
BRANCH=None
TEST=IPU is enabled for platforms and enumerates in lspci.
Change-Id: Ia3cf06d78be4301c68bfa8b1118ddff231d24a66
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44271
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code
running in verstage, which will program a new Cr50 register, to
have Cr50 generate longer than default interrupt pulses.
This needs to be selected on all Tiger Lake systems, since Tiger Lake
(and likely future Intel SoCs) require at least 100us interrupt pulses.
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
BUG=b:154333137
Change-Id: I20100d72ce426203943c1788d538bb2cd9d82e11
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Compiler's instrumentation cannot insert asan memory checks in
case of memory functions like memset, memcpy and memmove as they
are written in assembly.
So, we need to manually check the memory state before performing
each of these operations to ensure that ASan is triggered in case
of bad access.
Change-Id: I2030437636c77aea7cccda8efe050df4b77c15c7
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Instead of enabling ASAN_IN_ROMSTAGE from Kconfig file in a
platform's dedicated directory, let's introduce a new config
option HAVE_ASAN_IN_ROMSTAGE to denote if a given platform
supports ASan in romstage.
Similary, use HAVE_ASAN_IN_RAMSTAGE to indicate
if a given platform supports ASan in ramstage. Consequently, we
no longer have to make ASan x86 specific.
Change-Id: I36b144305465052718f245cacf61d3ca44dfb4b4
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch adds ASan support to romstage on x86 architecture.
A Kconfig option is added to enable ASan in romstage. Compiler
flags are updated. A memory space representing the shadow region
is reserved in linker section. And a function call to asan_init()
is added to initialize shadow region when romstage loads.
Change-Id: I67ebfb5e8d602e865b1f5c874860861ae4e54381
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch adds address sanitizer module to the library and reserves
a linker section representing the shadow region for ramstage. Also,
it adds an instruction to initialize shadow region on x86
architecture when ramstage is loaded.
Change-Id: Ica06bd2be78fcfc79fa888721ed920d4e8248f3b
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
An additional compiler flag is added to make use of the shadow
offset callback feature we introduced in our GCC patch. Also,
a comment is added to tell user that this GCC patch needs to be
applied in order to use ASan.
Change-Id: Ia187e4991bf808f4ae137eff0ffdb9baea0085e9
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
With CSE-lite enabled, we were going through the lengthy memory
training procedure twice on the first power-on boot or after full BIOS
SPI flash update. This moves the global reset performed to achieve the
CSE-lite RO to RW reboot to a later boot phase so that it happens
after the memory training data has been written to the MRC cache. Now,
the 2nd (and subsequent) reboot can utilize the memory training data
established during the 1st boot.
This reduces the first boot time by about 20s on a 16GB system.
Looking at the timing stats form cbmem, the normal boot penalty is
about 300ms - mostly attributed to running FspSiliconInit a 2nd
time. We will get this time back when the mrc_cache refactoring effort
lands (cb:44196, et. al).
BUG=b:162021048
TEST=Booted on volteer, confirmed 20s faster boot time.
Change-Id: Ia42d72fdec41f9792ab8f04205b20a55758a4235
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add code for IVRS generation to coreboot. Publish coreboot generated
structure rather than IVRS generated by FSP binary.
Reference Doc: 48882_IOMMU_3.05_PUB.pdf
BUG=b:155307433
TEST=Boot trembyle to shell and extract and compare IVRS tables and make
sure they cover the same devices.
Change-Id: I693f4399766c71c3ad53539634c65ba59afd0fe1
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4
only if we know that the Cr50 is generating 100us interrupt pulses.
We have to do so, because the SoC is not guaranteed to detect pulses
shorter than 100us in S0i3.4 substate.
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code
running in verstage, which will program a new Cr50 register, provided that
Cr50 firmware is new enough to support the register.
BUG=b:154333137
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Change-Id: If83188fd09fe69c2cda4ce1a8bf5b2efe1ca86da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Kconfig 5.8 interprets $(...) itself using environment variables, which
generally means that they expand to the empty string. \$(...) works
with both our current and new Kconfig with the desired behavior
(to pass it through unmodified).
Change-Id: I726567eeb61d2035560152677d2b4548c1472be9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44584
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Not selecting `ME_MBP_CLEAR_LATE` results in a build failure. Since both
traditional and ULT platforms are known to be working, drop the option.
Change-Id: I09ce27f812966800e36f6c0624c93759089faf45
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Together with the "AMD_XMP" changes, now this board with Crucial
BLT8G3D1869DT1TX0 sticks could run at 1600 MT/s CL8 (8-8-9-23) speeds.
Earlier only 1333 MT/s CL9 (9-9-10-27) has been possible with coreboot.
1866 MT/s CL9 is impossible on f16kb without northbridge overclocking.
tRP in "CL-tRCD-tRP-tRAS" gets set 1 point higher by AGESA because of
Errata 638. See more info in a BKDG for AMD Family 16h Models 00h-0Fh.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I7e9f5120421221043f9f9dfe143b51bfa61936be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44462
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD f16kb boards are perfectly capable of working at 1600MT/s RAM speeds
even with two DDR3 UDIMM modules per channel. AM1I-A only supports a
single-channel operation, with at most two DIMMs per channel, so raising
these limit values is required to let it and similar boards run faster.
Successfully tested on AM1I-A and two Crucial BLT8G3D1869DT1TX0 UDIMMs,
together with related AMD_XMP changes - also required to get a 1600MT/s
with this set of modules which have only 1333MT/s at JEDEC part of SPD.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I2a9da4e594ab3dc38b5ba87520633cbd01c9ce01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44461
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since Volteer also uses the CSE Lite SKU and the cr50, it is subject
to a problem where old cr50 FW will not be able to properly detect an
SoC reset, so the reset on cold boots caused by the CSE Lite RO->RW
jump should instead get an assist from the EC, which can perform a
full cold reset.
BUG=b:162977697
TEST=Verify EC performs the cold reset
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie8ae21c203da218459d5fd30a23be23520ed0598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
* Enable optional x86_64 romstage, postcar and ramstage
* Add Kconfig for x86_64 compilation
* Add documentation for x86 qemu mainboards
* Increase CAR stack as x86_64 uses more than 0x4000 bytes
Working:
* Boots to Linux
* Boots to SeaBIOS
* Drops to protected mode at end of ramstage
* Enumerates PCI devices
* Relocateable ramstage
* SMM
Change-Id: If2f02a95b2f91ab51043d4e81054354f4a6eb5d5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29667
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* On ARCH_RAMSTAGE_X86_64 jump to the payload in protected mode.
* Add a helper function to jump to arbitrary code in protected mode,
similar to the real mode call handler.
* Doesn't affect existing x86_32 code.
* Add a macro to cast pointer to uint32_t that dies if it would overflow
on conversion
Tested on QEMU Q35 using SeaBIOS as payload.
Tested on Lenovo T410 with additional x86_64 patches.
Change-Id: I6552ac30f1b6205e08e16d251328e01ce3fbfd14
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The AM335X is a SoC, so should be in the soc tree.
This moves all the existing am335x code to soc/ and updates any
references. It also adds a soc.c file as required for the ramstage.
Change-Id: Ic1ccb0e9b9c24a8b211b723b5f4cc26cdd0eaaab
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Implements fit_payload_arch for the arm (aarch32) architecture, so that
FIT images can be used. The implementation is very similar to the
existing implementations for arm64 and riscv, and has mostly been
lifted from these other ports.
TEST: Booted Beaglebone Black (in progress port, to be submitted soon!)
with a FIT image containing a 5.4 kernel, dtb and initramfs.
Change-Id: I6b50c6f06b83c00a5b3622b5bbafe67130b6d233
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
