pmc_set_acpi_mode() should run after Chrome EC dealt with all host event
bits, like SMI mask (otherwise the FAFT firmware_FWScreenCloseLid test
will fail).
BUG=b:153249055
TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage
Change the GBB flag to 0x140 then check SMI mask during depthcharge
phase, make sure it's 0x0000000000000001.
Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com>
Change-Id: Icfff5cc5550f23938343e4d26ef76093bb9cf7c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The previous Intel CPX-SP FSP release was ww20 release.
The ww22 release fixs issues related to FSP_NV_STORAGE HOB. The end of end
flow of using memory training data to generate FSP_NV_STORAGE HOB and
using memory training data passed from bootloader to skip memory
training, works now. This saves 8 minutes of boot time (with FSP verbose
logging enabled on DeltaLake server).
This release also adds UPD parameters to support IIO bifuration.
The ww24 release has following updates:
a. Removed a number of unnecessary UPD parameters, such as mmiolSize,
mmiolBase, OemHookPostTopologyDiscovery, OemGetResourceMapUpdate.
b. Added UPD parameters to support PCIe ports configuration.
c. Updated IIO_UNIVERSAL_DATA HOB, each stack now has mmio base/limit
fields, in addition to PCIe resource memory base/limit fields.
With ww24 release, the issue with PCIe link training persists. On YV3
config A, the onboard NIC card has x4 connection to port 2D. This
NIC device is not recognized by FSP.
Corresponding soc/intel/xeon_sp/cpx change is made:
* There are changes in PLATFORM_DATA structure, so hob_display.c
is updated.
* There are changes in UPD parameters, so romstage.c is updated.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I70762b377a057d0fca7806f485cce8d479fb5baa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41903
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If VPD_SMBIOS_VERSION is selected, it would read VPD_RO variable that can
override SMBIOS type 0 version.
One special scenario of using this feature is to assign a BIOS version to
a coreboot image without the need to rebuild from source.
VPD_SMBIOS_VERSION default is n.
Tested=On OCP Delta Lake, dmidecode -t 0 can see the version being updated
from VPD.
Change-Id: Iee62ed900095001ffac225fc629b3f2f52045e30
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: insomniac <insomniac@slackware.it>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This enables to configure the Thermal Control Circuit (TCC) activation
value to new value as tcc_offset in degree Celcius. It prevents any
abrupt thermal shutdown while running heavy workload. This helps to
take early thermal throttling action before CPU temperature reaches
maximum operating temperature TjMax value. Also, cleanup local functions
from previous intel soc specific code base like for apollolake, broadwell,
skylake and cannonlake.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value.
Change-Id: I37dd878902b080602d70c5c3c906820613ea14a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This also makes the calling of the eMMC GPIO mux setup function
conditional on PICASSO_LPC_IOMUX instead of AMD_LPC_DEBUG_CARD which
only makes the selection of PICASSO_LPC_IOMUX user-configurable.
Change-Id: Ic49a668f82fbc1b851c07d312b543d2889fe4734
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort
connectivity. While Dali can either be fused-down PCO or RV2 silicon,
Pollock is always RV2 silicon.
Since we have all boards using this code in tree right now,
soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku().
Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change allows mainboard to configure different wakeup routes that
can be used by a GPIO key:
1. SCI: This is selected when SCI route is used to wake the system. It
results in _PRW property being exposed in ACPI tables.
2. GPIO IRQ: This is selected when GPIO controller wake is used to
wake the system. It is typically used when the input signal is not
dual routed and the GPIO controller block is not capable of applying
filters for IRQ and wake separately. In this case, _PRW is not exposed
in ACPI tables for the key device.
3. Disabled: No wakeup supported.
Based on these wakeup routes, gpio_keys_add_child_node() is updated to
expose _PRW and _DSD properties for wakeup appropriately.
Additionally, the change updates mainboards that were already using
gpio_keys to set wakeup_route attribute correctly and renames "wake"
to "wake_gpe" to make the usage clear.
BUG=b:159942427
Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
All Intel southbridges with SPI perform this write. Put it inside a
function in common code. Use a different name to avoid a name clash.
As it is only one statement, make it inline so that it can be defined
on the header itself. It is only called once per southbridge anyway.
Change-Id: I3c284d6cffd22949d50b4c4f9846ceaef38d7cda
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This reverts commit 1408798637.
Reason for revert: Causing backlight issues in device. Will reland after more debugging to figure out the root cause.
BUG=b:159370566
BRANCH=None
TEST=boot up device and make sure when kernel is booted, backlight comes up.
Change-Id: I643854c6c805d262539bbb482808e8c322059a49
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently, Reset Power Cycle Duration is set with default value (4s).
This adds around ~5 seconds of delay during power cycle or global reset.
So, this patch sets PchPmPwrCycDur (Reset Power Cycle Duration) to 1s
to minimize the delay.
Delay with Power Cycle or Global Reset:
Existing behaviour:
S0->S5 -> [ ~5 seconds delay ] -> S5->S0
With the patch:
S0->S5 -> [ ~2 seconds delay ] -> S5->S0
Also, correct the comment mentioned for PchPmSlpAMinAssert.
The value(3) defined for PchPmSlpAMinAssert triggers signal assertion width
to 98ms not 2s.
Test=Verified on Hatch and Puff boards
BUG=b:158634281
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I368c6716a92e06903a872f9e87ae0698eab95bdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42441
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
