Enable MMU in bootblock for performance, link common code to provide
mtk_mmu_after_dram() to update MMU table in romstage after dram ready,
implement mtk_soc_disable_l2c_sram(), and call
mtk_mmu_disable_l2c_sram() to turn off L2C sram in ramstage.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui.
Change-Id: I4e35f8276ca23de7fd13da3515b9f48d944ead32
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
* Configure and enable MMU.
* Cover the whole I/O space.
* A minimum of 512KB TTB space is required.
* Use secure mem attribute as firmware is running in ARM TZ region.
Tested on Cavium SoC.
Change-Id: I969446da62b4cc7adf9393fab69ff84ebf49220d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This adds Cavium CN81xx SoC and SFF EVB files.
Code is based off of Cavium's Octeon-TX SDK:
https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK
BDK coreboot differences:
bootblock:
- Get rid of BDK header
- Add Kconfig for link address
- Move CAR setup code into assembly
- Move unaligned memory access enable into assembly
- Implement custom bootblock entry function
- Add CLIB and CSIB blobs
romstage:
- Use minimal DRAM init only
devicetree:
- Convert FTD to static C file containing key value pairs
Tested on CN81xx:
- Boots to payload
- Tested with GNU/Linux 4.16.3
- All hardware is usable (after applying additional commits)
Implemented in future commits:
- Vboot integration
- MMU suuport
- L2 Cache handling
- ATF from external repo
- Devicetree patching
- Extended DRAM testing
- UART init
Not working:
- Booting a payload
- Booting upstream ATF
TODO:
- Configuration straps
Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688
Signed-off-by: David Hendricks <dhendricks@fb.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/23037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Config ISH in SOC side by checking if ISH device is turned on.
"IshEnable" is not needed anymore since ISH device on/off will tell
if ISH should be enabled or not. "IshEnable" will be removed from chip.h
in separate CL.
Atlas board specific ISH setting is needed, which is committed in
separate CL.
BUG=b:79244403
BRANCH=none
TEST=Verified on Atlas board with ISH rework. ISH log showed on console.
Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
It can not emit byte data without BytePrefix.
design to:
Or (Local5, GPIO_PIN_OUT, Local5)
error due to GPIO_PIN_OUT is 0x40 but 0x40 encoding means
nothing in AML spec.
so it will include next emitted string in Or:
Or (Local5, Local5, \_SB.GPW2)
fix:
Store (0x40, Local0)
Or (Local5, Local0, Local5)
BUG=b:110962003
BRANCH=master
TEST=emerge-grunt coreboot
extract SSDT then check ACPI syntax is correct
Change-Id: I7a0704112b77105826de87b14a38ed2f665224d5
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/27306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Legacy IO enables access to RTC IO 0x70-0x73. This is needed for CMOS to
function correctly.
BUG=b:110817463
TEST=ran firmware_CorruptFwSigB on grunt
Change-Id: I533226ba764f567e348577d7fcf6ebe43336609a
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
If IO CF9 is not enabled, hard_reset() won't do anything in bootblock or
verstage.
BUG=b:110817463
TEST=built on grunt and made sure that hard_reset() reboots.
Change-Id: I5f091077a17db3dfe5b8e8367163312db6828360
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27267
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Using common mtcmos code to power on audio and display modules in SOC.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui. Passes the status check at the end of
mtcmos_power_on()
Change-Id: I41f16ba36432a8bbc47793cec2979753c9f84b43
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
An ACPI RMRR table is requried for IOMMU to work properly with an
iGPU (without using passthrough mode), so create one along with the
DRHD DMAR table if the iGPU is present and enabled.
Test: build/boot google/chell and purism/librem13v2 with kernel
parameter 'intel_iommu=on' but without 'iommu=pt;' observe integrated
graphics functional without corruption.
Change-Id: I202fb3eb8618f99d41f3d1c5bbb83b2ec982aca4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Add DMAR RMRR table entry and helper functions, using the existing
DRHD functions as a model. As the DRHD device scope (DS) functions
aren't DRHD-specific, genericize them to be used with RMRR tables as
well. Correct DRHD bar size to match table entry in creator function,
as noted in comments from patchset below.
Adapted from/supersedes https://review.coreboot.org/25445
Change-Id: I912b1d7244ca4dd911bb6629533d453b1b4a06be
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27269
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It used the sandybridge systemagent binary and mentioned that in the
help text which is simply wrong and won't work.
This copies the nb/intel/haswell/Kconfig to not include an mrc.bin by
default.
Change-Id: I2e151a66abc6dab710abdbb92c0c28884d88912e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27140
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This enables the user to set the completion timeout value in PCI
Express Device Control 2 register via devicetree.cb.
Based on corebootBDE-270-iou-complto.patch in Arista EOS 4.20 release.
Change-Id: If0527899bc2047d0e57c11f7801768d07f9a5179
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/26225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The stub flash driver is a temporary hack that planned to adapt eMMC to
SPI flash. Remove the hack since SPI flash is what we really expect.
BUG=b:80501386
BRANCH=none
TEST=Boots fine on Kukui
Change-Id: If29869461fc8c2efe26bb8c901737ee85935d27f
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Change a86d1b8 (soc/intel/common: Add SMM common code for Intel
Platforms) moved APL to use common SMM code. However, smi.c and smm.h
files under soc/intel/apollolake/ were not removed. This change
removes the dead files since they are not used anymore.
BUG=b:110836465
Change-Id: I1ff213372521fd47e2335de6a4b438d16c74ecd3
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Call to pmc_disable_all_gpe is required before enabling SMIs to ensure
that we do not end up in a recursive SMI handler loop as mentioned in
change 74145f7 (intel/common/pmc: Disable all GPEs during
pmc_init). Thus, this call was added at the end of
pmc_fill_power_state as we want to ensure that all the GPE registers
are backed up before being cleared for identifying the wake source in
ramstage.
This resulted in a side-effect on APL where pmc_fixup_power_state was
called much later in the boot process. Even though we have got rid of
pmc_fixup_power_state, this change moves the call to
pmc_disable_all_gpe to happen just before enabling SMIs. This helps to
keep the disabling of GPEs logically before the enabling of SMIs and
any clean ups that happen in pmc or soc-specific code should not
affect the state of GPEs.
BUG=b:110836465
TEST=Verified that wake sources are correctly identified on KBL and
APL. Also, no SMI handler issues observed when resuming.
Change-Id: I122a8118edcec117f25beee71a23c0a44ae862ed
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Now that APL does not need pmc_fixup_power_state, this function can be
removed from the PMC common code as well.
BUG=b:110836465
Change-Id: I94de41f3e52228bca4b7a5579afe5a23719429be
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
On APL, call to pmc_fixup_power_state was added because GPE0_EN
registers did not have the right bits set on resume from S3 -- this
was a result of GPE_CFG registers getting reset to their default state
on resume. GPE_CFG registers are programmed as part of pmc_gpe_init
which was previously done only in ramstage.
However, with change a673d1c (soc/intel/apollolake: Initialize GPEs in
bootblock), call to pmc_gpe_init was added to bootblock which means
that GPE_CFG registers will have the right state by the time control
reaches romstage where pmc_fill_power_state is called. Thus, call to
pmc_fixup_power_state is totally redundant and in fact leads to
side-effects because of the call to pmc_disable_all_gpe at the end of
pmc_fill_power_state.
BUG=b:110836465
TEST=Verified on yorp that wake source is correctly identified on
resume from S3.
Change-Id: Ia63ddbe381ce8a59736c231d745fd71d008d5d92
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For cases with POSTCAR_STAGE=y this reference pulled
in the implementation of run_ramstage() which we would
not call.
Using _program results with the same region being marked
as WRPROT-cacheble.
Change-Id: Ie1eaf6f5bb8baa13e946112c4fc3d854dbf750a3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/27232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Limit is the maximum number of bits to be tested, however it's being checked
against the number of bytes of uint32_t. when it should be number of bits.
Create a macro to provide the number of bits, and use it instead of sizeof.
BUG=b:75996437
TEST=Add debug messages to see code passing beyond the check, build and
boot grunt, check that it passed the limit check, remove debug code.
Change-Id: Id1dfda26d789183b346b20c37fec923d996b80db
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to
save power. This requires use of an additional register (Misc control
register 2) and another bit in the existing 'protect' register. The naming
of bit 0 of that register is incorrect, based on the latest datasheet
(14 June 2018) so fix that too.
BUG=b:73726008
BRANCH=none
TEST=boot without this patch:
iotools mem_read32 0xfed80e00
0x0046ffff
With this patch:
$ iotools mem_read32 0xfed80e00
0x00463fff
Also see that the PCIe clock stops when eMMC is idle and can be started by
starting disk activity.
Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/26515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
During Speaker playback, quad Channel I/V feedback data is
captured from SSP0 Rx. Out of these 4-channels, Stereo V-Sense data
needs to be given as echo ref stream.
So, adding stereo capture config to max98373_capture_formats.
BUG=b:110074225
TEST='Audio playback and Capture Stereo echo ref data'
Change-Id: I6fe619ece94d5011caffe37ef10b48f956938db9
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/27182
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Alternative buffer communication support for PTT is no longer
needed for CNL onwards and coreboot does not need to reserve additional
4KiB memory for PTT support.
Change-Id: I11993cef77fd5e879eedabc1ed344f91f8257c90
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/27176
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SoC users from IOTG team is looking forward for a solution to skip
coreboot AP initialization flow and make use of FSPS-UPD to
perform AP reset.
TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs
out of reset.
Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
