The values from auxadc may be incorrect if not calibrated by efuse.
Without calibration, the value error range is about +/-50mv,
and after being calibrated the error range is about +/-10mv.
BUG=b:131391176
TEST=make clean && make test-abuild; boots on Kukui rev 2 units.
BRANCH=none
Change-Id: Iccd6ea0ad810c993f9b62c0974279c960f890e52
Signed-off-by: Po Xu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: JG Poxu <jg_poxu@mediatek.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust FMAP sections that
- ELOG only needs 4K (by driver limitation)
- SHARED_DATA only needs 4K or less (for netboot params)
- SMMSTORE is probably not needed since UEFI@ARM is not available yet
- VPD can be smaller (most x86 devices have only 16/8K for RO/RW)
- Increase RW_LEGACY to 1M (recommended value)
- Move all new saved space to CBFS
BUG=b:134624821
TEST=Built Kukui image and boots on Rev2 units.
Change-Id: Id2910df73ea47bfa32e056d631d1c3e5f1eed0d1
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Coverity believes there is a path where StdHeader is possibly
null. This *should* be incorrect, since the header is actually
initialized through the module dispatch framework, though Coverity
can't see it due to the extensive type-punning. However, the control
flow is so dizzingly complicated that I'm not even completely sure,
so adding an extra assert to be careful won't hurt anyway.
Change-Id: If3d7c5d5c5bba846e7453b3dbc824e2208d749fb
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1379932
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Logging and clearing the recovery mode switch doesn't have
anything to do with vboot_handoff. Move it to the main verstage
logic file.
BUG=b:124141368, b:124192753
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I2e74f3893463e43fe5fad4a8df8036560f34e0db
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These functions are no longer used and may be removed:
* vboot_handoff_check_recovery_flag
* vboot_get_handoff_flag
BUG=b:124141368, b:124192753
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ie05652ef1288eef74bd2e7e8bea79fd29d523859
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33533
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Two functions retrieve vboot recovery_reason:
* vboot_handoff_get_recovery_reason
* vboot_get_recovery_reason_shared_data
Previously, when CBMEM comes online, a vboot_handoff data
structure is created, and depending on the architecture,
coreboot may eventually lose access to vboot_working_data.
After implementing vboot_working_data CBMEM migration,
vboot_working_data is always guaranteed to be accessible.
vboot_get_recovery_reason_shared_data is corrected to also
allow accessing vboot_working_data in ramstage and postcar.
Now, vboot_handoff_get_recovery reason returning a valid recovery
reason implies that vboot_get_recovery_reason_shared_data should
*also* return a valid recovery reason. Thus we may remove the
former.
BUG=b:124141368, b:124192753
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Iac216dc968dd155d9d4f8bd0f2dfd5034762f9a0
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The default voltage of vsim2 is set to 2.76V for sim card usage.
In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage.
However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V.
So we set it to 2.7V with modifying calibration value.
BUG=b:126139364
BRANCH=none
TEST=measure vsim2 voltage with multimeter
Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Intel Braswell supports i2c block writes using SMBus controller.
This support is missing in actual smbus routines.
Add do_i2c_block_write() which is a based on do_smbus_block_write() but
also write first byte to SMBHSTDAT1.
The caller needs to configure the SMBus controller in i2c mode.
In i2c mode SMBus controller will send the next sequence:
SMBXINTADD, SMBHSTDAT1, SMBBLKDAT .. SMBBLKDAT
To ensure the the command is send over the bus the SMBHSTCMD register must
be written also
BUG=N/A
TEST=Config eDP for LCD display on Facebook FBG-1701
Change-Id: I40f8c0f5257a62398189f36892b8159052481693
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add arguments for additional PSP blobs needed with Family 17h support,
including the new AGESA binary loaders.
Create a new type of structure and entry for a BIOS directory table,
containing PMU code, microcode updates, as well as the BIOS initial
code.
Details on each of these items may be found in the AMD Platform Security
Processor BIOS Architecture Design Guide for AMD Family 17h Processors
(NDA only, #55758).
BUG=b:126593573
TEST=Used with WIP Picasso
Change-Id: I4899dedb6f5e29a27ff53787a566d5b8633a8ad5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This was done to update the global variable g_ichspi_lock but this is
now removed in favor of reading the lock bit during runtime instead of
keeping track of the state.
Change-Id: I8cb69a152b0e050d64d8979ee92de2d24136f8dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33390
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SPI swseq controller can be locked in other parts of the code, for
instance when it's locked down in the finalize section. The driver
has to be made aware of that. The simpler solution is to not keep
track of the state and simply read out the lock bit on each SPI
transfer.
Change-Id: Ifcd5121b89d6f80fc1c1368786982d0d9fa1bf61
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
