Configure the pins for the UART unconditionally in the mainboard code (when we
know which UART to configure) instead of in the UART driver. This also means
the UART will work if later software wants to use it without setting up the
pins.
Built and booted on pit with the serial turned off and some serial init
in the kernel decompression stub fixed.
Change-Id: Icab5755e4f935f52d44b9cb3b43d1cb62acce08f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/65299
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4457
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This patch implements the basic infrastructure required to use the USB
A-A firmware upload feature on Exynos5 processors with Coreboot. It will
require a corresponding host-side script that activates the feature and
uploads the correct image parts in the correct order to harcoded target
addresses, as described in the comments of alternate_cbfs.c.
Also fixes a bug in the Google Snow mainboard where it would not
correctly initialize the pinmux configuration for the SPI flash bus.
During a normal SPI boot the IROM would already do that for you, but
when booting from USB you have to do it yourself.
Change-Id: I40a39f8f5d1d70b58dbf258015c1653a27097d67
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64875
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4456
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The existing GPIO config routines for SDMMC0-2 are over-generalized
and somewhat confusing as a result. It would work nicely if all SDMMC
ports were configured in the same fashion, but there are a few
exceptions.
For example, the inner function runs differently if we're using 8 bits
of data instead of 4, so a big chunk is skipped for SDMMC2. SDMMC0
requires SD_0_CDn to be an output rather than alternate function and
must have a value set.
This patch trades some verbosity for simplicy. Now the SDMMC GPIO
configuration a straight-forward sequence of GPIO operations
without any exceptions.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: If75075b24c6588c4c1b3be3fb9b1aa95e2fac2d1
Reviewed-on: https://gerrit.chromium.org/gerrit/65248
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4446
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This includes the new dp code, which is better, and the fimd code,
which is changed and improved. We took the chance to remove un-needed
files, and also to remove some foolish u-boot habits, but not all of
them. That will take time.
With these changes we get graphics.
Since the only mainboards we have with 16 bit graphics are 5:6:5,
adjust edid.c to just use that format. If at some future time we need
4:4:4, which seems unlikely, we'll need to add a function to adjust
the lb_framebuffer. Note that you can't just divine this from the EDID,
as the graphics pipe format need not match the actual final format used.
The EDID reading works. We've been requested to support hard-coded
EDIDs and that will come in the next revision. Currently the hard-coded
EDID is ignored for testing.
Change-Id: Ib4d06dc3388ab90c834f94808a51133e5b515a4d
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64240
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Ronald G. Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/4432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Up until now, a dummy terminator was required for CBFS microcode files.
This was a coreboot only requirement in order to terminate the loop which
searches for updates.
Figure out where the microcode file ends, and exit the loop if we pass the
end of the CBFS without finding any updates.
Change-Id: Ib61247e83ae6b67b27fcd61bd40241d4cd7bd246
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4505
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Microcode update file contains patches for various processor
revisions, it is not an error to have those.
Change-Id: Ifbca26276b66f17092afe249a2cfc229713a9fec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4520
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
CPU_MICROCODE_IN_CBFS was designed to mean that loading microcode updates
from a CBFS file is supported, however, the name implies that microcode is
present in CBFS. This has recently caused confusion both with contributions
from Google, as well as SAGE. Rename this option to
SUPPORT_CPU_UCODE_IN_CBFS in order to make it clearer that what is meant is
"hey, the code we have for this CPU supports loading microcode updates from
CBFS", and prevent further confusion.
Change-Id: I394555f690b5ab4cac6fbd3ddbcb740ab1138339
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4482
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
The name "LPDDR3PHY_CTRL_PHY_RESET_OFF" is not appropriate because the real
phy-reset is a low-active pin, so "off(0)" will trigger "start to reset".
To prevent confusion, we should rename the constants to "RESET_ENABLE" and
"RESET_DISABLE".
Change-Id: Iccba5ef3a2e992f877dea90741f0308c161758c9
Reviewed-on: https://gerrit.chromium.org/gerrit/61081
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/4357
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
To configure source clocks on Exynos 5420 for MMC drivers.
Some registers are different from the 5250. FSYS now has two parts
and MMC uses FSYS2. The MMC block uses MPLL as the clock source.
The "high-speed" MMC interface runs as 52MHz, so divider is set
accordingly.
Also, the MMC driver has changed from MSHCI (Mobile Storage Host Controller
Interface) to DWMCI (DesignWare MMC Controller Interface).
Change-Id: I9ba9cf43e2f2dcd9da747888c0c7676bd545177b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60858
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/4354
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
1) fix enable of power aware interrupt routing
2) set BIOS_RESET_CPL to 3 instead of 1
3) mirror PKG power limit values from MSR to MMIO on all SKUs
4) mirror DDR power limit values from MMIO to MSR
5) remove DMI settings that were from snb/ivb as they do
not apply to haswell
1) verify power aware interrupt routing is working by looking
in /proc/interrupts to see interrupts routed to both cores
instead of always to core0
BEFORE: 58: 4943 0 PCI-MSI-edge ahci
AFTER: 58: 4766 334 PCI-MSI-edge ahci
2) read back BIOS_RESET_CPL to verify it is == 3
localhost ~ # iotools mmio_read32 0xfed15da8
0x00000003
3) read PKG power limit from MMIO and verify it is the same
as the MSR value
localhost ~ # rdmsr 0 0x610
0x0000809600dc8078
localhost ~ # iotools mmio_read32 0xfed159a0
0x00dc8078
localhost ~ # iotools mmio_read32 0xfed159a4
0x00008096
4) read DDR power limit from MSR and verify it is the same
as the MMIO value (note this is zero based on current MRC input)
localhost ~ # rdmsr 0 0x618
0x0000000000000000
localhost ~ # iotools mmio_read32 0xfed158e0
0x00000000
localhost ~ # iotools mmio_read32 0xfed158e4
0x00000000
Change-Id: I6cc4c5b2a81304e9deaad8cffcaf604ebad60b29
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60544
Reviewed-on: http://review.coreboot.org/4333
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The original intention was to only run UPDATE_FIT when a microcode file was
included in CBFS. This happens when either CPU_MICROCODE_CBFS_GENERATE or
CPU_MICROCODE_CBFS_EXTERNAL is selected, however, the makefile checked that
CPU_MICROCODE_IN_CBFS was selected instead. The end result was that on
hasswell, the UPDATE-FIT step was always run, even when no microcode was
included, generating a build error.
Instead, introduce a new variable which tells if a microcode update is
added in CBFS during the build.
Change-Id: I28638912ed6f77761ef8a584f7636dc907b7a9b7
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4480
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit * bdafcfa Add the Intel FSP 206ax CPU core support
Introduced this option. This option was meant to have a board generate
a CBFS file containing microcode. However, microcode generation used to be
enabled by default when CPU_MICROCODE_IN_CBFS was selected.
The introduction of BOARD_MICROCODE_CBFS_GENERATE killed that automatic
default, which is not what we want. This option is misguided in the sense
that it tends to introduce a non-default which had been intentionally a
default. We now have to select two Kconfig options in order to generate
microcode in CBFS, meaning one option is redundant.
Change-Id: I3034833df1a9afa7d6d9d537484cb4ac89d30183
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4478
Tested-by: build bot (Jenkins)
Add support for 206ax using the Intel FSP.
The FSP is different enough to warrant its own source files
for now. It has different CAR code, micorcode, and FSP inclusion.
It may be possible to combine this code with the mrc based
solution used by the chromebooks in the future.
Change-Id: I5105631af34e9c3a804ace908c4205f073abb9b4
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/4016
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Do not directly check the return value of get_option, but instead compare
the returned value against a CB_CMOS_ error code, or against CB_SUCCESS.
Change-Id: I2fa7761d13ebb5e9b4606076991a43f18ae370ad
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4266
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Compiler may do loads of optimisations around stack switch and so it's allowed
to break stack switch as it sees fit. Do it in assembly instead.
Not tested.
Change-Id: I277a62a9052e8fe9b04e7c65d149e087282ac2a2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4286
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
SPD GPIOs were being read prior to initialization in romstage_common. To
fix, pass the copy_spd function to romstage_common, to be called at the
appropriate time (after PCH init, before DRAM init).
Change-Id: I2554813e56a58c8c81456f1a53cc8ce9c2030a73
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58608
Reviewed-on: http://review.coreboot.org/4237
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
If Vortex86EX PS/2 keyboard controller system flag bit times out,
reload controller firmware code and try again.
Abort and die after 11 tries as this means the CPU is defect. Also
inform the user by printing a message.
Change-Id: I24aec4b20d85c721c01e72686f3eb1259f9334b8
Signed-off-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-on: http://review.coreboot.org/3988
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
When an INIT# is delivered to the CPU the CPU starts
executing from the reset vector. However, the internal state
is maintained. Therefore, check for such a condition and
reset the system.
Issues 'apreset warm' on the EC console. INIT# is sent and
CPU notices it's not a clean reset and forces one. No hangs.
Change-Id: I71229e0e5015ba8c60f5989c533268604ecc1ecc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57111
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4216
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
