Fix regression from commit ecea916
cpu/intel/common: Extend FSB detection to cover TSC
MSR_EBC_FREQUENCY_ID (0x2c) was not defined for affected
CPU models and rdmsr() caused reset loops. Implementations
deviate from public documentation.
Change to IA32_PERF_STATUS (0x198) already used in i945/udelay.c
to detect FSB to TSC multiplier.
Change-Id: I7a91da221920a7e7bfccb98d76115b5c89e3b52e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The Razer Blade Stealth H2U is a KabyLake System using:
- Intel KBL 7500U
- ITE8528E SuperIO
- Intel 600P Series NVMe SSD
- Either four MT52L1G32D4PG (16GB) or MT52L512MB32D4PG (8GB)
of soldered memory in dualchannel mode
- (Optional) Touchscreen
- HDMI 2.0a via DP-1: Paradetech PS175
- AlpineRidge Thunderbolt 3 controller
- TPS65982 USB-PD power switch / multiplexer
Even though it has a 16MB chip equipped (W25Q128.V) only the first 8MB
are used and mapped via IFD. The rest is left empty (0xFF). The flash is
not secured in any way and can be read via flashrom. It should be the
source for this port's IFD and ME blobs.
Working:
- USB-A Ports left and right
- Speakers
- Touchscreen (USB)
- Onboard Keyboard in Linux
- NVMe SSD
- SeaBIOS, Tianocore and Grub Payloads
- Webcam
- Powersaving Modes
- Battery state and LID switch, sometimes slow to update.
- Touchpad (I2C-HID)
- Headphones
Not part of this commit:
- Thunderbolt / USB-C (Requires advanced EC signaling)
- Full HDMI support (Currently requires plugged connection at boot)
Change-Id: I7ede881d631e1863f07f5130f84bc3b8ca61a350
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board
config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER.
This is mainly to avoid depthcharge config duplication.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
When accessing register with multiple bit fields, the common approach is
to use clrsetbits_le32, for example:
clrsetbits(®, (1 << 0) | (0x3 << 1) | (0x7 << 10),
(1 << 0) | (0x1 << 1) | (0x5 << 10));
This hard to maintain because we have to calculate the mask values
manually, make sure the duplicated shift (offset) was set correctly.
And it may be even worse if the value to set will be based on some
runtime values (that many developers will do a if-block with two very
similar argument list), and leaving lots of magic numbers.
We want to encourage developers always giving field names, and have a
better way of setting fields. The proposed utility macros are:
DEFINE_BITFIELD(name, high_bit, low_bit)
EXTRACT_BITFIELD(value, name)
WRITE32_BITFIELDS(addr, name, value, [name2, value2, ...])
READ32_BITFIELD(addr, name)
Where a developer can easily convert from data sheet like
BITS NAME
26:24 SEC_VIO
Into a declaration
DEFINE_BITFIELD(SEC_VIO, 26, 24)
Then, a simple call can set the field as:
WRITE32_BITFIELDS(®, SEC_VIO, 2);
That is much easier to understand than
clrsetbits_le32(®, 0x7 << 24, 0x2 << 24);
And to extract the value:
READ32_BITFIELD(®, SEC_VIO)
That is equivalent to:
(read32(®) & 0x3) >> 24
Change-Id: I8a1b17142f7a7dc6c441b0b1ee67d60d73ec8cc8
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35463
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- configure DMA fw_cfg
- add support to read using fw_cfg_dma
- provide fw config version id info in logs
BUG=N/A
TEST=Build and boot using qemu-i440fx.
Change-Id: I0be5355b124af40aba62c0840790d46ed0fe80a2
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbps)
while those with discrete DRAM can only run at 3200Mbps. This patch
enables 3600Mbps for eMCP DDR for better system performance.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test passes on Kukui
Change-Id: Iab6a9c2c390feeb9497b051a255b29566909e656
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Drop unused CNF2_LPC_EN, as there is no device which uses IO 0x4e/4f.
Do not use the mainboard model to set COMA_LPC_EN. Make use of
NO_UART_ON_SUPERIO instead, as it is more future-proof.
Change-Id: Iac49250b0f509a42012f82db8aa85ba85559c66f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Read-modify-write needs to access the same register. Numerically
both used defines are 0x3e, while register implementations are
not identical but only similar.
Change-Id: I9348b855320f86868e2d3ef76d3b8d7a4ab7fae0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Currently "DIMM numbers" increase monotonically for all the channels. However,
commonly DIMMS are numerated on per-channel basis. This change makes numeration
match the convention.
TEST=on OCP monolake, run dmidecode tool and see that "Locator" field matches
expectation.
Change-Id: I3e7858545471867a0210e1b9ef646529b8e2a31c
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35318
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=None, code already tested with grunt.
Change-Id: I68008ce076d348adbdabf7b49cec8783dd7134b4
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=Build and boot grunt using new SPI code, with debug enabled. Check
output.
Change-Id: I639973d993316a10daa7564462e689b2c183f536
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Create a new SPI code that overrides flash operations and uses the SPI
controller within the FCH to its fullest.
Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public)
BUG=b:136595978
TEST=Build and boot grunt using this code, with debug enabled. Check
output.
Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
With the support of various algorithms and banks in tlcl_extend(),
digest_algo parameter of tpm_extend_pcr() started defining the target
PCR bank in TPM2 case.
The OS expects coreboot to extend the SHA256 bank of BOOT_MODE_PCR.
The value that the OS expects coreboot to extend into BOOT_MODE_PCR
is the SHA1 digest of mode bits extended to the length of SHA256 digest
by appending zero bytes.
Thus the correct value for digest_algo passed into tpm_extend_pcr() for
BOOT_MODE_PCR is TPM_ALG_SHA256.
This didn't matter until adding the support for multiple digest introduced
by patches like https://review.coreboot.org/c/coreboot/+/33252, as
tlcl_extend always used SHA256 bank before.
Change-Id: I834fec24023cd10344cc359117f00fc80c61b80c
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35476
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As we redirect all `dd` output to /dev/null (it would clutter the
console otherwise), there is no error message if a binary to be
added isn't found. If we add them as dependency, OTOH, `make` will
complain properly.
Change-Id: I40c3979b84341cb88c7e9a5084c1a97230ea5503
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33327
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add more DRAM frequency bootup to support DRAM frequencies 1600Mbps,
2400Mbps, 3200Mbps and 3600Mbps.
BUG=b:80501386
BRANCH=none
TEST=Memory test passes on eMCP platform
Change-Id: Ic1378ca43fb333c445ca77e7dc0844cdf65f2207
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch implements the dram init setting by replacing the hard-coded
init sequence with a series of functions to support calibration for more
frequencies. These functions are modified from MediaTek's internal DRAM
full calibration source code.
BUG=b:80501386
BRANCH=none
TEST=1. Kukui boots correctly
2. Stress test (/usr/sbin/memtester 500M) passes on Kukui
Change-Id: I756ad37e78cd1384ee0eb97e5e18c5461d73bc7b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
The bus variable doesn't live outside the scope of this function, and is
only used as a convenient way for passing the pointers to all the
sub-functions, so it doesn't need to be allocated. Put it on the stack
instead. A similar fix for ipq806x was done in 0f33d8c29a
(soc/qualcomm/ipq806x: Remove unnecessary allocation).
Change-Id: Ibb1129b92e38a105e100f59e03d107de340b925c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
