These allocations are not really part of write_tables() and the move
opens possibilities to use CBMEM instead of SPI Flash to restore some
parts of system state after S3 resume.
Change-Id: I0c36bcee3f1da525af077fc1d18677ee85097e4d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7097
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Just took combined sandybridge per-device ACPI patch and applied it
on FSP flavour to avoid need of separate tests.
Change-Id: I09838cc01ede504416078edcb1c267a11539e714
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
A cast did not work for me, but this variable did.
This is one of the many issues with building e3501 I'm
running into.
Change-Id: Ifb19a17770604f2d63dfef762d08200add77ee34
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7122
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Native raminit for sandy/ivybridge was introduced in:
7686a56 sandy/ivybridge: Native raminit.
An additional current level is needed.
Change-Id: Ied73d168045c25d37afa5d9d7073de7f9c6435c7
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7098
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
Without this patch the laptop powers down after resume.
Change-Id: Ic6486fd4c4cc55b1ac5695f9d6d83fc2193b7eba
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7102
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T520 is a LP156WD1 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: Ib733836e3233a7f14a79f36a27ed36b638e837f5
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7100
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
It's specific to butterfly. Doesn't do anything on lenovos.
Change-Id: I98b7c3199de5d8515bd869936e1b95847321d264
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This patch adjusts the read timeout in order to support flash chips
which needs more than 60ms to complete a spi command.
This problem can be reproduced on a Thinkpad T520 with M25PX64 spi chip ( suspend to ram bug ).
Change-Id: I22b2e59f1855ead6162a292b83b9b854b55c0235
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/7105
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Move generic options to the "General Setup" menu.
Move device specific options to the "Devices" menu.
Change-Id: I514a021305d43f026b24fd3016477300700ed401
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7089
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Support added for Micron N25Q128 SPI flash, which has
the same manufacturer id as ST Micro. Jedec ID =
0x20 0xBB 0x18. Since existing stmicro.c only compares
the last device id byte, this flash is mistakenly
identified as M25P128, which has ID = 0x20 0x20 0x18.
To handle this situation and avoid breaking code for
existing devices, a two byte .id member is added.
New devices should be added to the beginning of the
flash table array with .idcode = STM_ID_USE_ALT_ID and
.id = the two byte jedec device id.
A 4KB subsector erase capability is added and used for
this new device. It requires using a different SPI
op-code supported by adding .op_erase member. Previous
devices defined in stmicro.c are assigned their original
op-code for 64KB sector erase.
N25Q128 is now working on a custom designed Bayley Bay
based board. Tested by verifying the MRC fastboot cache
is successfully (re)written. Note that previous devices
were not retested.
Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7077
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Nowhere in database p_state_num is set. So this whole function ends up
being a noop. Moreover the offsets used by it are wrong with any
optimizing iasl. Remove it in preparation of move to per-device ACPI.
Change-Id: I1f1f9743565aa8f0b8fca472ad4cb6d7542fcecb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7012
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This really is not critical but we might as well get it right.
Change-Id: Ifec1e8dc35d7f5bb89d9a7a877d82410c83a3288
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7070
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.
Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The offset of the device_nvs in the gnvs struct is expected to be
0x1000. It is actually 0x100 so padding is needed to move device_nvs
to the expected location. ACPI references to device_nvs objects will
be correct with the padding.
This was tested using a Micro Industries customized Baytrail-I board
based on the Intel Bayley Bay CRB. In intel/baytrail/nvs.h, there's
a Google customized structure located at 0x0100-0x0FFF that is
removed from the fsp_baytrail/nvs.h which explains the mismatch here.
Change-Id: I4721a79b53b5b3345ff9b0c053bdd31d2cf9cb61
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7038
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
