The device tree documentation was promoting using a GPIO wake event and
a GPE wake event. We should only ever have one. This wasn't actually
causing a problem because the wake bit was set on the `irq` property,
but the IO-APIC can't actually wake the system, so it was a no-op.
This change fixes up the markdown so it's formatted correctly, and also
adds a section explaining what the different wake configurations are.
BUG=b:243700486
TEST=mdformat
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifcdbd5371408784bf9b81c1ade90263de8c60e0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67385
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When system_uuid CBFS file is present and contains the UUID
in a string format, the driver will parse it and convert to binary
format to populate the SMBIOS type 1 UUID field.
TEST=Add UUID file and boot MSI PRO Z690-A DDR4 WIFI and check with
dmidecode if the UUID is populated correctly.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I22f22f4e8742716283d2fcaba4894c06cef3a4bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64639
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the devicetree driver example into a separate page under the
drivers category, and link to it from both the devicetree page and
the drivers index page. This makes more sense from a grouping
perspective and makes the info easier to find.
Change-Id: Ic3ca80b93a0020737c7ccb5313a0877172022e1a
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
SMMSTORE version 2 is a complete redesign of the current driver. It is
not backwards-compatible with version 1, and only one version can be
used at a time.
Key features:
* Uses a fixed communication buffer instead of writing to arbitrary
memory addresses provided by untrusted ring0 code.
* Gives the caller full control over the used data format.
* Splits the store into smaller chunks to allow fault tolerant updates.
* Doesn't provide feedback about the actual read/written bytes, just
returns error or success in registers.
* Returns an error if the requested operation would overflow the
communication buffer.
Separate the SMMSTORE into 64 KiB blocks that can individually be
read/written/erased. To be used by payloads that implement a
FaultTolerant Variable store like TianoCore.
The implementation has been tested against EDK2 master.
An example EDK2 implementation can be found here:
eb1127744a
Change-Id: I25e49d184135710f3e6dd1ad3bed95de950fe057
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The USB4 retimer device needs to declare a _DSM with specific functions
that allow for GPIO control to turn off the power when an external
device is not connected. This driver allows the mainboard to provide
the GPIO that is connected to the power control.
BUG=b:156957424
Change-Id: Icfb85dc3c0885d828aba3855a66109043250ab86
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44918
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add chips ops for IPMI KCS.
* Get IPMI version over KCS.
* Generates ACPI SPMI table for IPMI KCS.
* Generates SMBIOS type 38 for IPMI KCS.
* Generates ACPI SPMI device for IPMI KCS on LPC device.
* Add documentation
To use this driver on BMC that support KCS on I/O:
1. Add an entry to the devicetree.cb:
chip drivers/ipmi
device pnp ca2.0 on end # IPMI KCS
end
2. Select IPMI_KCS in Kconfig.
3. (Optional) enable LPC I/O decode for the given address.
Tested on Wedge100s.
Change-Id: I73cbd2058ccdc5395baf244f31345a85eb0047d7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
