We've had issues in the past where building with a sufficient number of
processors would expose a previously hidden timing issue in the build.
Those have frequently been in the path of a single chip or architecture,
so this adds a few different builds.
I'd like to have a representative sampling without increasing the build
time too much so maybe in the future, we can modify the clang build
targets to be different than the GCC targets.
These can be updated to different targets over time.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I51e39bc1ce6b9b7c257d0170ce3d2b5ab99d35df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
When installing the python modules with pip3 as root, the installer
throws a lot of warnings about conflicts and recommends that it not
be run that way. This change installs the python modules as the
coreboot user instead. The --break-system-packages argument can now
be removed.
It takes along some other changes made to the coreboot home directory
which also don't need to be run as root, and now adds the .local/bin
directory into the path.
The trailing docker PATH configuration is discarded as cleanup - it
doesn't have any effect. Nothing uses it in the Dockerfile, and it
doesn't end up updating the path, which is set by /etc/profile.
Change-Id: Ie8273009bb527e267584bba84504191aa7294ca3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76855
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The libfreetype6-dev has been a transitional package pointing at
libfreetype-dev for a while now. The libfreetype6-dev package is
currently out of date in debian sid, so it's a good time to switch
away from it.
TEST=Rebuild coreboot-sdk
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If40e9eacf871d3840745ea18ec2ff5975cc62da7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77328
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The default branch for the board-status repo was renamed to main, and
thus the -u option for board_status.sh no longer works as it tries to
push to master. Update the branch accordingly.
TEST: board_status.sh is able to upload results to review.coreboot.org
using the -u flag.
Change-Id: Ic90e95d8701e21c4ae30a7ac85560eebe7658d79
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Excluding the "recommended" packages reduces the size of the container
image from ~8.40GB to ~7.23GB.
Install the following packages in addition as they are useful for one or
the other case, or at some point even required:
* ca-certificates
* less
* neovim
* openssh-client
Change-Id: Ic38ba75765e3a0c21bbfe3f380880c9ac575d0d2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76085
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While Debian Sid provides GCC version 13, GNAT is still on version 12.
To keep them in sync, install GNAT 13 explicitly instead of the meta
package that is still referring to GNAT 12.
The coreboot toolchain including GNAT still compiles fine.
Change-Id: Ifb2b4c5fbaf3c0a8a78f6ebe244e2ccfec664b41
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
The site-local directory is not checked into the coreboot tree, so this
change excludes it by default. By adding the site-local directory,
an issue could be missed in the rest of the coreboot tree.
This change also adds a new command-line argument of -S or --site_local
that re-enables the site-local checking.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I95efa3e7b2cbb84e5c84d263222d8e914626d314
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77138
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The docker-shell target was originally intended to point at the
docker-jenkins-node image, and was documented as such. It was actually
split into two targets - docker-shell and docker-jenkins-shell.
This fixes the documentation for docker-shell and adds new help
for docker-jenkins-shell. The docker-jenkins-shell target is also
noted as phoney now.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib3ce82f6a73a2f81e5ae51ce8063ae4e59ef67db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Based on contents from coreboot wiki[1], this patch adds much needed
documentation for the very important abuild utility.
On top of what was there:
- Mainboard targets have been updated
- Added example for building one variant of one board
- Added example for building boards selectively and/or with custom
configurations using --skip_set/--skip_unset, -K, and config files
[1] https://www.coreboot.org/Abuild
Change-Id: I69701eaeef616828bc30736aba2f617e844a3148
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The command "git branch -a | grep -q ${branch}" may not exit with 0 when
pipefail is set. "grep -q" exits immediately with exit code 0 as soon as
a match is found. However, at that point "git branch -a" may be still
writing to the pipe, leading to SIGPIPE. When pipefail is set,
PIPESTATUS 141 will be returned. Fix the problem by not using "grep -q".
Also fix the branch name in the generated commit subject.
Change-Id: Ic07efb5e2a4f3b7bbc6e76da9e026771bc685bdb
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77085
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The change does the following:
- adds PCH IDs for 700 series chipsets per the DOC# 619362 rev 2.2
- updates GPIO table for PCH-S per the DOC# 618659 rev 2.1
- enables dumping GPIOs for 700 series PCH
Change-Id: I4509ad714772ce90cdee5135227c02640acb6085
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
IT8784E is basically a IT8786E stripped from serial ports 3-6.
There are very few minor register differences in EC IO space and GPIO
LDN, which are covered by this patch.
Based on IT8784E-I Preliminary Specification V0.7.1 (non-public).
TEST=Dump SIO configuration on Protectli VP4670 (vault_cml).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5de8aeaff9697b854281391083f77a1083d12fe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Problem:
Me: $ util/abuild/abuild -t asus/p2b -b p2b-ls
abuild: No such target: asus/p2b, variant: p2b-ls
Cause: We identify boards and variants using path names in tree, so
I type in the test command above. abuild identifies all board variants
the Kconfig way, in all caps and all underscores.
Result: Expectation gap and abuild can't find anything where we expect
it to. All variants with a hyphen in their names are affected.
Fix: Add a substitution to replace hyphens with underscores.
Test: I get my abuild with the command above, even a variant-specific
test config works.
Change-Id: I10d5b471dac41c50a85c4a309ec561b02687bb9a
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41918
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The coreboot-jenkins-test docker image takes the coreboot-jenkins-node
docker image and runs a series of tests to verify that things build
properly.
This was original created to test the coreboot-sdk, but build functions
like the documentation have been moved from the sdk image into the
jenkins node, so the test needs to be renamed.
Add the makefile target to the help and phony target list at the same
time.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0e6282bbb163064f177c8e68e7180ba2bdc101f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Some stages in bootflow prefer to use 16 bytes UUID instead of
traditional 2 bytes FWID to identify the firmware components they
verify/validate. Hence add version 2 of hash table which identifies
firmware components using UUID. Other than UUID and a reserved field for
alignment reasons, the format of the hash table is very similar to hash
table v1.
BUG=b:277292697
TEST=Build and boot to OS in Myst with PSP Verstage enabled. Ensure that
the hash table v2 is built and installed into BIOS image for the
components that are configured in amdfw.cfg file. Ensure that the
validation by PSP is successful for all the relevant components during
the boot flow.
Change-Id: I2899154086cf8e90c3327178157b07ead034b16e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76586
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently this tool generates a hash table to verify signed binaries,
with a 2 byte FWID as the only kind of identifier. Going forward some
binaries are going to adopt 16 byte UUID identifiers and more binaries
will follow in the future SoCs. Hence add support for handling multiple
firmware identifier types. While at this remove the unused fwid from the
PSP FW table.
BUG=b:277292697
TEST=Build BIOS image and boot to OS in Myst & Skyrim.
Change-Id: I5180dc0fe812b174b1d40fea9f00a85d6ef00f2f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
To support full 64-bit addresses, there is a new field `ext_lfb_base`
since Linux 4.1. It is unclear, however, how a loader is supposed to
know if the kernel is compatible with this. Filling these previously
reserved bits doesn't hurt, but an old kernel would probably ignore
them and not know that it's handling a clipped, invalid address. So
we play safe, and only allow 64-bit addresses for kernels after the
2.15 version bump of the boot protocol.
Change-Id: Ib20184cf207f092062a91ac3e6aa819b956efd33
Signed-off-by: Nico Huber <nico.h@gmx.de>
Co-authored-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76479
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The original default, minimum abbreviated hash length was 7. It dif-
fers on newer systems, however. This breaks reproducibility, so set
an explicit length. 12 hex digits should be good enough.
Note: This sets only a minimum. With a high enough number of commit
objects in the repository, Git could still decide to use a longer
hash, again breaking reproducibility. 12 digits will hopefully pro-
vide enough margin.
Change-Id: Ia86e9cc41e27a0a57d498dcb13aec954c4ea0f04
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
In the JPEG decoder, use `bytes_per_line` instead of `width` for
address calculations, to allow for bigger framebuffers. When
calling jpeg_decode(), add an offset to the framebuffer address
so the picture gets centered.
Change-Id: I0174bdccfaad425e708a5fa50bcb28a1b98a23f7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
rv32iafc-ilp32 is compatible with rv32iac-ilp32 for library
implementation, so add a reuse rule allowing the default configuration
to support rv32iafc.
-IAFC is an unusual configuration (much less common than -IMAFC),
but multilib reuse has essentially no cost: this change is useful to
users of platforms that support hardware floating-point but cannot
use hardware multiply/divide for any reason. To avoid generating a
new set of libraries this is limited to the soft-float ABI.
Tested by verifying that `gcc -march=rv32iafc -mabi=ilp32
--print-search-dirs` refers to the rv32iac/ilp32 library directory
as expected, rather than just the root library directory as occurs
when an unsupported target is selected (for instance, rv32id).
Change-Id: Ie056ba6488a138fe0876eebf7cbc59477b3c3518
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
