This device claims to run at 75MHz with dual read, but it is not always
reliable. Add an option to change the SPI flash speed to 16MHz, to avoid
any problems.
BUG=b:111363976
TEST=manually try to get my em100 running (it doesn't yet)
Change-Id: I78d3d32c467aac82c72d31c773bfb0f69808aed4
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/27466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This applied to AMD devices as well as Intel, although the mechanism is
different. Move the option to a common place.
BUG=b:111363976
TEST=USE=em100-mode emerge-reef coreboot
See that a message appears:
* Enabling em100 mode (slow SPI flash)
Change-Id: Iea437bdf42e7bc49b1d28c812bfc6128e3eb68bd
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/27467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
To comply with all relevant bodies throughout the world, SAR settings
take into account the lowest common denominator Tx power settings. This
setup may lead to non-optimal performance when the user location is in a
country that may allow higher power setting. The purpose of Wireless Geo
Delta Settings (WGDS) is to provide offset settings for FCC, Europe,
Japan and Rest of the world. These offsets would be added (by Intel wifi
driver) to the base SAR Tx Power as defined in WRDS and EWRD
BUG=b:65155728
BRANCH=none
TEST=WGDS ACPI table gets created as expected.
Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enabling of TBMC device on AP side requires corresponding support on the
EC side as well. Since not all octopus variants have tablet mode support
enabled, this change enables TBMC device only for phaser.
BUG=b:111264961
Change-Id: I1ce181baa8ebaff0a9d767e97ddc256eef9789e8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
To enable ISH device on atlas board, change "device pci 13.0 off end" to
"device pci 13.0 on end" in file
mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is
not needed.
Config atlas board specific ISH setting in devicetree.cb.
Dynamically load gpio setting for ISH enabled/disabled cases.
BUG=b:79244403
BRANCH=none
TEST=Verified on Atlas board with ISH rework. ISH log showed on console.
Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://review.coreboot.org/26486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to get better performance, map dram as cached after dram ready
in romstage.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui. Need a futher check after dram
calibration code ready.
Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27304
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable MMU in bootblock for performance, link common code to provide
mtk_mmu_after_dram() to update MMU table in romstage after dram ready,
implement mtk_soc_disable_l2c_sram(), and call
mtk_mmu_disable_l2c_sram() to turn off L2C sram in ramstage.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui.
Change-Id: I4e35f8276ca23de7fd13da3515b9f48d944ead32
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add an extra space after 8th value on each line to make it easier
to count the values.
Update the empty spd to remove two random 0x80 values.
BUG=None
TEST=None
Change-Id: If330dbf0c133f65aedddc58ecb351a80b0e45a05
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/27423
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to BKDG for AMD Family 16h Models 30h-3Fh Processors
SDR50 tuning should be disabled in 0xA8 register.
Also fix clock frequency setting in 0xA4 for stepping >= A1
which caused reduced performance of SD cards transfer speed
even by half.
Change-Id: I80ca754b0c89e08aa90ff885467c7486a3efb999
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As *None* is special and not a payload, it makes sense to put it at the
top. Also, it was at before the latest addition of the FIT payload
choice.
Fixes: a892cde6 (lib: Add FIT payload support)
Change-Id: I52163ea9472308ecbc396012d9912b9617e0c318
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/27414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
* Configure and enable MMU.
* Cover the whole I/O space.
* A minimum of 512KB TTB space is required.
* Use secure mem attribute as firmware is running in ARM TZ region.
Tested on Cavium SoC.
Change-Id: I969446da62b4cc7adf9393fab69ff84ebf49220d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This adds Cavium CN81xx SoC and SFF EVB files.
Code is based off of Cavium's Octeon-TX SDK:
https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK
BDK coreboot differences:
bootblock:
- Get rid of BDK header
- Add Kconfig for link address
- Move CAR setup code into assembly
- Move unaligned memory access enable into assembly
- Implement custom bootblock entry function
- Add CLIB and CSIB blobs
romstage:
- Use minimal DRAM init only
devicetree:
- Convert FTD to static C file containing key value pairs
Tested on CN81xx:
- Boots to payload
- Tested with GNU/Linux 4.16.3
- All hardware is usable (after applying additional commits)
Implemented in future commits:
- Vboot integration
- MMU suuport
- L2 Cache handling
- ATF from external repo
- Devicetree patching
- Extended DRAM testing
- UART init
Not working:
- Booting a payload
- Booting upstream ATF
TODO:
- Configuration straps
Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688
Signed-off-by: David Hendricks <dhendricks@fb.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/23037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Convert Cavium's BDK devicetree blob to a static C file.
The resulting file must be included in mainboard folder to provide
board specific configuration values to BDK functions.
Example call:
python devicetree_convert.py --in sff8104.dtb --out bdk_devicetree.c
Change-Id: I76a5588aefe4f680228eca46a0e4dba7e695931c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26228
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
