Also removed internal pull ups for CX_PREQ_L and
CX_PREQ_L signals as they have external pull ups.
BUG=b:110654510
TEST=On Yorp Proto 2, flashed image and verified that it boots to OS.
Checked Wake-on-Wifi works with both cnvi and pcie modules.
Also executed a few suspend resume cycles.
Change-Id: I0a76cd2a1481c828fc092aaf7e870a411624879c
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/28328
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PMC base address is different for CNP LP pch and CNP H pch.
Added logic to determine PMC base addrress dynamically based on PCH ID.
BUG=none
BRANCH=none
TEST=Boot Coffeelake U RVP board and check if PMC base address is
determined correctly.
Change-Id: I833395260e8fb631823bd03192a092df323250fa
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/27523
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We should always update BCLP, no matter if the driver is ready yet to
process the request. This way it will hold the current value when the
driver initializes.
Change-Id: I4b091d744f95da39abe542966f0a8589a187573b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The _BCM function requires a percentage value. While the
brightness in mailbox3 requires a value in uint8_t. Meaning 255 = 100%.
Previous implementation stored the percentage brightness value resulting
in limiting the brightness to ~40% of it's maximum power.
Only affects brightness control using mailbox3.
Fixes: 6838aaebf9 ("drvs/intel/gma/acpi: Add methods to use MBOX3")
Change-Id: I290b5f5b2a8ee406e39e86d3e0de9997798d890d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/28345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Grunt takes a few seconds to update the EC, so display a notification
screen while that's happening.
BUG=b:113286040
TEST=Boot Grunt with old EC firmware, see update screen
Change-Id: I95fc4d3430bac66c09f57a4d34abde08752e5f0e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/28374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In function _gpio_base3_value(), if num_gpio is 0 it'll cause the return
of an undefined value, as no for loop will be executed. Assert that it's
not 0.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I2b6537900fa41ebbee0171959f3ce236d360bc80
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Modify the previously SOC_CNL_LPDDR4_INIT to SOC_CNL_MEMCFG_INIT, to
make the infrasturture to handle both LPDDR4 and DDR4 cases in the
future. Consider the case of reading SPD from SMBus other than providing
SPD pointer directly.
BUG=N/A
TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a"
compiles successfully.
Change-Id: I2f898147f67dd52b89cc3d9fc4e6b3854fa81f57
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28248
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some ACPI interfaces introduced by Chrome or coreboot do not
need drivers outside ChromeOS, for example Chrome EC or
coreboot table; or will be probed by direct ACPI calls (instead
of trying to find drivers by device IDs).
These interfaces should be set to hidden so non-ChromeOS systems,
for example Windows, won't have problem finding driver.
Interfaces changed:
- coreboot (BOOT0000), only used by Chrome OS / Linux kernel.
- Chrome OS EC
- Chrome OS EC PD
- Chrome OS TBMC
- Chrome OS RAMoops
BUG=b:72200466
BRANCH=eve
TEST=Boot into non-ChromeOS systems (for example Windows)
and checked ACPI devices on UI.
Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1078211
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Trybot-Ready: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/28333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set up EC interrupt GPIO to boot depthcharge. Without this patch,
depthcharge will fail to detect EC interrupt GPIO.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui and see in logs, that depthcharge detects
EC interrupt GPIO.
Change-Id: I0ec2c70c189a059219954e0384aaf98995285728
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/28250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The firmware of devices connected to LPC should deassert the LPC CLKRUN#
signal when there is no bus activity on LPC.
Necessary changes:
- Enable LPC CLKRUN#
- Enable LPC PCE (Power Control Enable)
- Enable LPC CCE (Clock Control Enable)
- Remove I/O decoding range on LPC for COM 3
- Disable I/O UART driver
Change-Id: I2fd80e3fdcf23658f97b8182a77df7e09ddf25d6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/28268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Only Ids.h had definitions still in use, and they were removed or moved to
AGESA.h. Now Ids.h, IdsPerf.h and IdsLib.h can be safely removed.
BUG=b:112885948
TEST=Build grunt
Change-Id: I031ae8eb5f34fee801365fc89ea11a881211e726
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28299
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bayhub eMMC controller default runs SD base 50MHz at the first power on.
After boot into OS, mmc kernel driver will config controller to HS200/208MHz
and send MMC CMD21 (tuning block).
But Bayhub PCR register 0x3E4[22] (eMMC MODE select) is not clear
after system warm reset.
So eMMC will still run 208Mhz but there is no block tuning cmd in depthcharge.
It will cause two Sandisk eMMC (SDINBDA4-64G-V/SDINBDA4-32G-V) to fail to
load kernel and trap in 0x5B error (No bootable kernel found on disk).
BUG=b:111964336
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: Ic080682e67323577c7f0ba4ed08f8adafca620cc
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/28353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reduce the CPU passive threshold sample rate from 5 seconds to 1
second so DPTF will react faster to rapid temperature increases.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BUG=b:113101335
BRANCH=atlas
TEST=manual performance/power testing on nocturne.
No longer see messages like below in syslog,
'CPU0: Package temperature above threshold'
Change-Id: I2dc9d157b54500bae29e123978bb8ad6e05ef619
Reviewed-on: https://review.coreboot.org/28325
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reduce the CPU passive threshold sample rate from 5 seconds to 1
second so DPTF will react faster to rapid temperature increases.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BUG=b:67459049
BRANCH=nocturne
TEST=manual performance/power testing on nocturne.
No longer see messages like below in syslog,
'CPU3: Package temperature above threshold'
Change-Id: Ic20c718fd3a496db7c7192feec4f230d924cc458
Reviewed-on: https://review.coreboot.org/28324
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The macro IDS_ERROR_TRAP is only defined, and never used. Also,
IDSOPT_ERROR_TRAP_ENABLED is defined FALSE, so the macro would translate
to nothing. Remove the macro and IDSOPT_ERROR_TRAP_ENABLED.
BUG=b:112885948
TEST=Build grunt
Change-Id: I2c3ca4b0a4a1f96f245ba2f4902fd0051dda77ef
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Function IdsErrorStop() is only used within AmdLib.c function
LibAmdMsrRead(), which in turn is only used once within PspBaseLib.c and
three times inside AmdLib.c, all with well defined MSR addresses.
IdsErrorStop() is used as a trap if MSR address is 0 or 0xFFFFFFFF, which
clearly it's not. Therefore it can be safely removed from AmdLib.c.
BUG=b:112885948
TEST=Build grunt
Change-Id: I47ffcbd4fbae28b6d711a340f0ac3f3b007e8e4f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Update TSR1 trip point from 48C to 50C.
Also, change power limit2 minimum value from 8W to 10W.
These are the values as per recent thermal tuning.
BUG=b:79779737
BRANCH=None
TEST=Build coreboot for Octopus board.
Change-Id: I33a9d2dc3e0e5566d95b1f1e46d3922dc8965b2b
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/28187
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the MADT table version to sync with the FADT table version.
All current coreboot FADT tables are set to ACPI_FADT_REV_ACPI_3_0
and the MADT should be set to match.
This error was found by running FWTS:
FAILED [MEDIUM] SPECMADTFADTRevisions: Test 2, MADT revision is not in sync with
the FADT revision; MADT 1 expects FADT 3.0 but found 4.0 instead.
BUG=b:112476331
TEST-Run FWTS
Change-Id: If5ef53794ff80dd21f13c247d17c2a0e9f9068f2
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Use a single function to set ACPI table versions. This allows us
to keep revisions synced to the correct levels for coreboot. This
is a partial fix for the bug:
FAILED [MEDIUM] SPECMADTFADTRevisions: Test 2, MADT revision is not
in sync with the FADT revision; MADT 1 expects FADT 3.0 but found 4.0
instead.
BUG=b:112476331
TEST-Run FWTS
Change-Id: Ie9a486380e72b1754677c3cdf8190e3ceff9412b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28276
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
