Host FW status 1 (FWSTS1/HFSTS1) register definition is common across SoCs,
hence move it to common. Also add below helper function,
* wait_cse_sec_override_mode() - Polls ME status for "HECI_OP_MODE_SEC_OVERRIDE".
It's a special CSE mode, the mode ensures CSE does not trigger any
spi cycles to CSE region.
* set_host_ready() - Clears reset state from host CSR.
TEST=Verified CSE recover mode on CML RVP & Hatch board
Change-Id: Id5c12b7abdb27c38af74ea6ee568b42ec74bcb3c
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
me_read_config32() is defined in multiple places, move it to common
location. Also, this function is usually used for reading HFSTS
registers, hence move the HFSTS register definitions to common location.
Also add a funtion to check if the CSE device has been enabled in the
devicetree and it is visible on the bus. This API can be used by
the caller to check before initiating any HECI communication.
TEST=Verified reading HFSTS registers on CML RVP & Hatch board
Change-Id: Icdbfb6b30a007d469b5e018a313c14586addb130
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35225
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds Lewisburg C62x Series PCH support by adding the
Production and Super SKUs of the following PCI devices:
- LPC or eSPI Controllers,
- PCI Express Root Ports,
- SSATA and SATA Controllers,
- SMBus,
- SPI Controller,
- ME/HECI,
- Audio,
- P2SB,
- Power Management Controller.
These changes are in accordance with the documentation:
[*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US
Change-Id: I7eaf2c1bb725ffed66f86c023c415ad17fe5793d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
The P2SB PCI device can be "hidden", which causes all sorts of
nightmares and bugs. Moreover, FSP tends to hide it, so finding
a good solution to this problem is impossible with FSP into the mix.
Since the values for IBDF and HBDF were already hardcoded as FSP
parameters, define them as macros and use these values directly to
generate the DRHD.
Change-Id: I7eb20182380b953a1842083e7a3c67919d6971b9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
* Add Kconfig to enable TXT
* Add possibility to add BIOS and SINIT ACMs
* Set default BIOS ACM alignment
* Increase FIT space if TXT is enabled
The following commits depend on the basic Kconfig infrastructure.
Intel TXT isn't supported until all following commits are merged.
Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
According to the documentation, Sunrise PCH-H [1,2] and Lewisburg PCH
[3] supports up to 16 PCIe ports. However, ACPI contains a description
for only 12 ports. This patch adds ACPI code for missing ports
[1] page 182, Intel (R) 100 Series and Intel (R) C230 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2,
December 2018, Document Number: 332690-005EN
[2] page 180, Intel (R) 200 Series and Intel (R) Z370 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2,
October 2017, Document Number: 335192-003
[3] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US
Change-Id: I954870136e0c8e5ff5d7ff623c7a6432b829abaf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This allows for minor optimization as num_timestamps becomes
a constant zero for a function with local scope. The loop
with calls to timestamp_add() gets removed from bootblock.
Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This provides stack guards with checking and common
entry into postcar.
The code in cpu/intel/car/romstage.c is candidate
for becoming architectural so function prototype
is moved to <arch/romstage.h>.
Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Variable length arrays were a feature added in C99 that allows the
length of an array to be determined at runtime. Eg.
int sum(size_t n) {
int arr[n];
...
}
This adds a small amount of runtime overhead, but is also very
dangerous, since it allows use of an unlimited amount of stack memory,
potentially leading to stack overflow. This is only worsened in
coreboot, which often has very little stack space to begin with. Citing
concerns like this, all instances of VLA's were recently removed from the
Linux kernel. In the immortal words of Linus Torvalds [0],
AND USING VLA'S IS ACTIVELY STUPID! It generates much more code, and
much _slower_ code (and more fragile code), than just using a fixed
key size would have done. [...] Anyway, some of these are definitely
easy to just fix, and using VLA's is actively bad not just for
security worries, but simply because VLA's are a really horribly bad
idea in general in the kernel.
This patch follows suit and zaps all VLA's in coreboot. Some of the
existing VLA's are accidental ones, and all but one can be replaced with
small fixed-size buffers. The single tricky exception is in the SPI
controller interface, which will require a rewrite of old drivers
to remove [1].
[0] https://lkml.org/lkml/2018/3/7/621
[1] https://ticket.coreboot.org/issues/217
Change-Id: I7d9d1ddadbf1cee5f695165bbe3f0effb7bd32b9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In addition to zero IccMax specified by mainboard with socketed CPU, allow
a zero LoadLine default.
The SoC code will fill in the default AC/DC LoadLine values are per
datasheets:
* "7th Generation Intel® Processor Families for H Platforms, Vol 1"
Document Number: 335190-003
* "7th Generation Intel® Processor Families for S Platforms and
Intel ®Core™ X-Series Processor Family, Vol 1"
Document Number: 335195-003
The AC/DC LoadLine is CPU and board specific.
TODO: Find out how to get the LoadLine from vendor firmware and find out
how to map those to different CPU LoadLines.
Change-Id: I849845ced094697e8700470b4af95ad0afb98e3e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34938
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Datasheets used:
* "7th Generation Intel® Processor Families for H Platforms, Vol 1"
Document Number: 335190-003
* "7th Generation Intel® Processor Families for S Platforms and
Intel ®Core™ X-Series Processor Family, Vol 1"
Document Number: 335195-003
This allows mainboards to specify a zero IccMax, which all mainboards with
socketed CPU should do.
Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34937
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some timeouts given were too small when serial console is enabled due to
its spinlock making code runtime worse with every AP present.
In addition we usually don't know how long specific code runs and how
long ago it was sent to the APs.
Remove the timeout argument from mp_run_on_all_cpus and instead wait up
to 1 second, to prevent possible crashing of secondary APs still
processing the old job.
Tested on Supermicro X11SSH-TF.
Change-Id: I456be647b159f7a2ea7d94986a24424e56dcc8c4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
There was no code present to call wrmsr with the data we
prepared in the structs. The MSRS are already set up by FSP,
just reference with the more recent names of PRMRR and UNCORE_PRMRR.
Change-Id: Ib49e7af52e1170a1304975ff0ae63f99e106dffe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
At the moment we only have two splitting of TSEG,
one with and one without IED. They can all use
same implementation.
Make configuration problems of TSEG region assertion
failures.
Rename file from stage_cache.c to tseg_region.c to
reflect it's purpose.
Change-Id: I9daf0dec8fbaaa1f4e6004ea034869f43412d7d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34776
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Guckian
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is easier to track CAR_GLOBAL_MIGRATION which is
the approach to be deprecated with the next release.
This change enforces new policy; POSTCAR_STAGE=y is
not allowed together with CAR_GLOBAL_MIGRATION=y.
Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add explicit CBMEM_STAGE_CACHE option. Rename
CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE.
Platforms with SMM_TSEG=y always need to implement
stage_cache_external_region(). It is allowed to return with a
region of size 0 to effectively disable the cache.
There are no provisions in Kconfig to degrade from
TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE.
As a security measure CBMEM_STAGE_CACHE default is changed to
disabled. AGESA platforms without TSEG will experience slower
S3 resume speed unless they explicitly select the option.
Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This implementation revises the UART PCI device reference in common
UART driver. The SOC functions have been aligned to provide the UART
PCI device reference using pcidev_path_on_root.
The uart_get_device() return type is changed, and files in which
it gets used are updated.
Change-Id: Ie0fe5991f3b0b9c596c3de9472e98e4091d7dd87
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
