ec/system76/ec: Remove RPM calculation

This calculation depends on the EC configuration. The EC is now
responsible for the calculation, and the RAM values have the actual RPM
values.

Change-Id: Ifabbcb5922643e218ed7c4984b1d41aee841bb39
Signed-off-by: Tim Crawford <tcrawford@system76.com>

src/ec/system76/ec/acpi/s76.asl

@@ -146,10 +146,6 @@ Device (S76D) {
 				Local1 = ^^PCI0.LPCB.EC0.RPM2
 			}
 		}
-		If (Local1 != 0) {
-			// 60 * (EC frequency / 120) / 2
-			Local1 = 2156250 / Local1
-		}
 		Return ((Local1 << 8) | Local0)
 	}
 

src/mainboard/system76/mtl/Kconfig

@@ -45,13 +45,6 @@ config BOARD_SYSTEM76_LEMP13
 	select SOC_INTEL_METEORLAKE_U_H
 	select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
 
-config BOARD_SYSTEM76_LEMP13_B
-	select BOARD_SYSTEM76_MTL_COMMON
-	select DRIVERS_I2C_TAS5825M
-	select HAVE_SPD_IN_CBFS
-	select SOC_INTEL_METEORLAKE_U_H
-	select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
-
 if BOARD_SYSTEM76_MTL_COMMON
 
 config MAINBOARD_DIR
@@ -59,7 +52,7 @@ config MAINBOARD_DIR
 
 config VARIANT_DIR
 	default "darp10" if BOARD_SYSTEM76_DARP10 || BOARD_SYSTEM76_DARP10_B
-	default "lemp13" if BOARD_SYSTEM76_LEMP13 || BOARD_SYSTEM76_LEMP13_B
+	default "lemp13" if BOARD_SYSTEM76_LEMP13
 
 config OVERRIDE_DEVICETREE
 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
@@ -68,17 +61,15 @@ config MAINBOARD_PART_NUMBER
 	default "darp10" if BOARD_SYSTEM76_DARP10
 	default "darp10-b" if BOARD_SYSTEM76_DARP10_B
 	default "lemp13" if BOARD_SYSTEM76_LEMP13
-	default "lemp13-b" if BOARD_SYSTEM76_LEMP13_B
 
 config MAINBOARD_SMBIOS_PRODUCT_NAME
 	default "Darter Pro" if BOARD_SYSTEM76_DARP10 || BOARD_SYSTEM76_DARP10_B
-	default "Lemur Pro" if BOARD_SYSTEM76_LEMP13 || BOARD_SYSTEM76_LEMP13_B
+	default "Lemur Pro" if BOARD_SYSTEM76_LEMP13
 
 config MAINBOARD_VERSION
 	default "darp10" if BOARD_SYSTEM76_DARP10
 	default "darp10-b" if BOARD_SYSTEM76_DARP10_B
 	default "lemp13" if BOARD_SYSTEM76_LEMP13
-	default "lemp13-b" if BOARD_SYSTEM76_LEMP13_B
 
 config CMOS_DEFAULT_FILE
 	default "src/mainboard/\$(MAINBOARDDIR)/cmos.default"

src/mainboard/system76/mtl/Kconfig.name

@@ -8,6 +8,3 @@ config BOARD_SYSTEM76_DARP10_B
 
 config BOARD_SYSTEM76_LEMP13
 	bool "lemp13"
-
-config BOARD_SYSTEM76_LEMP13_B
-	bool "lemp13-b"

src/soc/intel/alderlake/fsp_params.c

@@ -652,6 +652,13 @@ WEAK_DEV_PTR(tcss_usb3_port4);
 static void fill_fsps_tcss_params(FSP_S_CONFIG *s_cfg,
 		const struct soc_intel_alderlake_config *config)
 {
+	const struct device *tcss_port_arr[] = {
+		DEV_PTR(tcss_usb3_port1),
+		DEV_PTR(tcss_usb3_port2),
+		DEV_PTR(tcss_usb3_port3),
+		DEV_PTR(tcss_usb3_port4),
+	};
+
 	s_cfg->TcssAuxOri = config->tcss_aux_ori;
 
 	/* Explicitly clear this field to avoid using defaults */
@@ -669,8 +676,8 @@ static void fill_fsps_tcss_params(FSP_S_CONFIG *s_cfg,
 	s_cfg->D3ColdEnable = CONFIG(D3COLD_SUPPORT);
 
 	s_cfg->UsbTcPortEn = 0;
-	for (int i = 0; i < ARRAY_SIZE(config->tcss_ports); i++) {
-		if (config->tcss_ports[i].enable)
+	for (int i = 0; i < MAX_TYPE_C_PORTS; i++) {
+		if (is_dev_enabled(tcss_port_arr[i]))
 			s_cfg->UsbTcPortEn |= BIT(i);
 	}