Stefan Reinauer 0210119b4b Add support for Intel Ibex Peak (Mobile 5) southbridge
Change-Id: If56f2cacc5f1b2ef9c7b6aea508d458a43dd1309
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3397
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12 05:31:04 +02:00

59 lines
1.9 KiB
C

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdint.h>
#include <arch/io.h>
#include <console/console.h>
#include <usbdebug.h>
#include <device/pci_def.h>
#include <device/pci.h>
#include "pch.h"
#include <delay.h>
#if !defined (__PRE_RAM__) && !defined (__SMM__)
#define PCI_DEV(bus, dev, fn) dev_find_slot (bus, PCI_DEVFN (dev, fn))
#endif
void enable_usbdebug(unsigned int port)
{
u32 dbgctl;
device_t dev = PCI_DEV(0, 0x1a, 0); /* USB EHCI, D29:F7 */
device_t bdev = PCI_DEV(0, 0, 0); /* USB EHCI, D29:F7 */
/* Set the EHCI BAR address. */
pci_write_config32(dev, EHCI_BAR_INDEX, CONFIG_EHCI_BAR);
/* Enable access to the EHCI memory space registers. */
pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
pci_write_config16(bdev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
/* Force ownership of the Debug Port to the EHCI controller. */
dbgctl = read32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET);
dbgctl |= (1 << 30);
write32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET, dbgctl);
}
/* Required for successful build, but currently empty. */
void set_debug_port(unsigned int port)
{
/* Not needed, the ICH* southbridges hardcode physical USB port 1. */
}