047475cbd7
Add the initial directory for the port of the Librem 13 v2. The base implementation was copied from the google/chell directory and the chell references were replaced. spd directory was removed since the RAM is not soldered on the MB. The Kconfig, board_info.txt and devicetree.cb files were modified to match the Librem 13 v2 hardware information. The romstage.c, mainboard.c, Makefile.in and dsdt.asl were modified to remove chromeos specific code. The boardid.c, chromeos.c, chromeos.fmd, cmos.layout, ec.c, ec.h and smihandler.c files were removed from the tree, and the acpi directory was replaced with the acpi directory from the purism/librem13 board. These changes allow us to remove the references to chromeos specific code and allow coreboot to compile when the librem13v2 board is selected. Change-Id: I24263fde18fcea70163dbdc59df6ea1d98c97af8 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
238 lines
8.0 KiB
Plaintext
238 lines
8.0 KiB
Plaintext
chip soc/intel/skylake
|
|
|
|
# Enable deep Sx states
|
|
register "deep_s3_enable_ac" = "0"
|
|
register "deep_s3_enable_dc" = "0"
|
|
register "deep_s5_enable_ac" = "1"
|
|
register "deep_s5_enable_dc" = "1"
|
|
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
|
|
|
|
# GPE configuration
|
|
# Note that GPE events called out in ASL code rely on this
|
|
# route. i.e. If this route changes then the affected GPE
|
|
# offset bits also need to be changed.
|
|
register "gpe0_dw0" = "GPP_B"
|
|
register "gpe0_dw1" = "GPP_D"
|
|
register "gpe0_dw2" = "GPP_E"
|
|
|
|
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
|
|
register "gen1_dec" = "0x00fc0801"
|
|
register "gen2_dec" = "0x000c0201"
|
|
|
|
# Enable "Intel Speed Shift Technology"
|
|
register "speed_shift_enable" = "1"
|
|
|
|
# Enable DPTF
|
|
register "dptf_enable" = "1"
|
|
|
|
# FSP Configuration
|
|
register "ProbelessTrace" = "0"
|
|
register "EnableLan" = "0"
|
|
register "EnableSata" = "0"
|
|
register "SataSalpSupport" = "0"
|
|
register "SataMode" = "0"
|
|
register "SataPortsEnable[0]" = "0"
|
|
register "EnableAzalia" = "1"
|
|
register "DspEnable" = "1"
|
|
register "IoBufferOwnership" = "3"
|
|
register "EnableTraceHub" = "0"
|
|
register "XdciEnable" = "0"
|
|
register "SsicPortEnable" = "0"
|
|
register "SmbusEnable" = "1"
|
|
register "Cio2Enable" = "0"
|
|
register "ScsEmmcEnabled" = "1"
|
|
register "ScsEmmcHs400Enabled" = "1"
|
|
register "ScsSdCardEnabled" = "0"
|
|
register "IshEnable" = "0"
|
|
register "PttSwitch" = "0"
|
|
register "InternalGfx" = "1"
|
|
register "SkipExtGfxScan" = "1"
|
|
register "Device4Enable" = "1"
|
|
register "HeciEnabled" = "0"
|
|
register "FspSkipMpInit" = "1"
|
|
register "SaGv" = "3"
|
|
register "SerialIrqConfigSirqEnable" = "1"
|
|
register "PmConfigSlpS3MinAssert" = "2" # 50ms
|
|
register "PmConfigSlpS4MinAssert" = "1" # 1s
|
|
register "PmConfigSlpSusMinAssert" = "1" # 500ms
|
|
register "PmConfigSlpAMinAssert" = "3" # 2s
|
|
register "PmTimerDisabled" = "1"
|
|
|
|
register "pirqa_routing" = "PCH_IRQ11"
|
|
register "pirqb_routing" = "PCH_IRQ10"
|
|
register "pirqc_routing" = "PCH_IRQ11"
|
|
register "pirqd_routing" = "PCH_IRQ11"
|
|
register "pirqe_routing" = "PCH_IRQ11"
|
|
register "pirqf_routing" = "PCH_IRQ11"
|
|
register "pirqg_routing" = "PCH_IRQ11"
|
|
register "pirqh_routing" = "PCH_IRQ11"
|
|
|
|
# VR Settings Configuration for 5 Domains
|
|
#+----------------+-------+-------+-------------+-------------+-------+
|
|
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
|
|
#+----------------+-------+-------+-------------+-------------+-------+
|
|
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
|
|
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
|
|
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
|
|
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
|
|
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
|
|
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
|
|
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
|
|
#| IccMax | 7A | 34A | 34A | 35A | 35A |
|
|
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
|
|
#+----------------+-------+-------+-------------+-------------+-------+
|
|
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(4),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(7),
|
|
.voltage_limit = 1520,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_IA_CORE]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(5),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(34),
|
|
.voltage_limit = 1520,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_RING]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(5),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(34),
|
|
.voltage_limit = 1520,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(5),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(35),
|
|
.voltage_limit = 1520,
|
|
}"
|
|
|
|
register "domain_vr_config[VR_GT_SLICED]" = "{
|
|
.vr_config_enable = 1,
|
|
.psi1threshold = VR_CFG_AMP(20),
|
|
.psi2threshold = VR_CFG_AMP(5),
|
|
.psi3threshold = VR_CFG_AMP(1),
|
|
.psi3enable = 1,
|
|
.psi4enable = 1,
|
|
.imon_slope = 0x0,
|
|
.imon_offset = 0x0,
|
|
.icc_max = VR_CFG_AMP(35),
|
|
.voltage_limit = 1520,
|
|
}"
|
|
|
|
# Enable Root port 1.
|
|
register "PcieRpEnable[0]" = "1"
|
|
# Enable CLKREQ#
|
|
register "PcieRpClkReqSupport[0]" = "1"
|
|
# RP 1 uses SRCCLKREQ1#
|
|
register "PcieRpClkReqNumber[0]" = "1"
|
|
|
|
register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1
|
|
register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2
|
|
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
|
|
register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port
|
|
register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
|
|
register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD
|
|
|
|
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1
|
|
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2
|
|
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port
|
|
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
|
|
|
|
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
|
|
|
|
# Must leave UART0 enabled or SD/eMMC will not work as PCI
|
|
register "SerialIoDevMode" = "{
|
|
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexI2C4] = PchSerialIoPci,
|
|
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexUart0] = PchSerialIoPci,
|
|
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
|
|
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
|
|
}"
|
|
|
|
# PL2 override 15W
|
|
register "tdp_pl2_override" = "15"
|
|
|
|
register "tcc_offset" = "10" # TCC of 90C
|
|
|
|
# Send an extra VR mailbox command for the supported MPS IMVP8 model
|
|
register "SendVrMbxCmd" = "1"
|
|
|
|
device cpu_cluster 0 on
|
|
device lapic 0 on end
|
|
end
|
|
device domain 0 on
|
|
device pci 00.0 on end # Host Bridge
|
|
device pci 02.0 on end # Integrated Graphics Device
|
|
device pci 14.0 on end # USB xHCI
|
|
device pci 14.1 off end # USB xDCI (OTG)
|
|
device pci 14.2 on end # Thermal Subsystem
|
|
device pci 16.0 on end # Management Engine Interface 1
|
|
device pci 16.1 off end # Management Engine Interface 2
|
|
device pci 16.2 off end # Management Engine IDE-R
|
|
device pci 16.3 off end # Management Engine KT Redirection
|
|
device pci 16.4 off end # Management Engine Interface 3
|
|
device pci 17.0 on end # SATA
|
|
device pci 1c.0 on
|
|
chip drivers/intel/wifi
|
|
register "wake" = "GPE0_DW0_16"
|
|
device pci 00.0 on end
|
|
end
|
|
end # PCI Express Port 1
|
|
device pci 1c.1 off end # PCI Express Port 2
|
|
device pci 1c.2 off end # PCI Express Port 3
|
|
device pci 1c.3 off end # PCI Express Port 4
|
|
device pci 1c.4 off end # PCI Express Port 5
|
|
device pci 1c.5 off end # PCI Express Port 6
|
|
device pci 1c.6 off end # PCI Express Port 7
|
|
device pci 1c.7 off end # PCI Express Port 8
|
|
device pci 1d.0 off end # PCI Express Port 9
|
|
device pci 1d.1 off end # PCI Express Port 10
|
|
device pci 1d.2 off end # PCI Express Port 11
|
|
device pci 1d.3 off end # PCI Express Port 12
|
|
device pci 1f.0 on
|
|
chip ec/purism/librem
|
|
device pnp 0c09.0 on end
|
|
end
|
|
end # LPC Interface
|
|
device pci 1f.1 off end # P2SB
|
|
device pci 1f.2 on end # Power Management Controller
|
|
device pci 1f.3 on end # Intel HDA
|
|
device pci 1f.4 on end # SMBus
|
|
device pci 1f.5 on end # PCH SPI
|
|
device pci 1f.6 off end # GbE
|
|
end
|
|
end
|