On all targets the domain works as a host bridge. Xeon-sp code intends to feature multiple host bridges below a domain, hence rename the function to pci_host_bridge_scan_bus. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4e65fdbaf0b42c5f4f62297a60d818d299d76f73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78326 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
269 lines
7.6 KiB
C
269 lines
7.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <device/device.h>
|
|
#include <device/pci.h>
|
|
#include <fsp/api.h>
|
|
#include <fsp/util.h>
|
|
#include <gpio.h>
|
|
#include <intelblocks/acpi.h>
|
|
#include <intelblocks/cfg.h>
|
|
#include <intelblocks/cse.h>
|
|
#include <intelblocks/irq.h>
|
|
#include <intelblocks/itss.h>
|
|
#include <intelblocks/p2sb.h>
|
|
#include <intelblocks/pcie_rp.h>
|
|
#include <intelblocks/systemagent.h>
|
|
#include <intelblocks/tcss.h>
|
|
#include <intelblocks/xdci.h>
|
|
#include <soc/intel/common/reset.h>
|
|
#include <soc/intel/common/vbt.h>
|
|
#include <soc/iomap.h>
|
|
#include <soc/itss.h>
|
|
#include <soc/p2sb.h>
|
|
#include <soc/pci_devs.h>
|
|
#include <soc/pcie.h>
|
|
#include <soc/ramstage.h>
|
|
#include <soc/soc_chip.h>
|
|
#include <soc/tcss.h>
|
|
|
|
#if CONFIG(HAVE_ACPI_TABLES)
|
|
const char *soc_acpi_name(const struct device *dev)
|
|
{
|
|
if (dev->path.type == DEVICE_PATH_DOMAIN)
|
|
return "PCI0";
|
|
|
|
if (dev->path.type == DEVICE_PATH_USB) {
|
|
switch (dev->path.usb.port_type) {
|
|
case 0:
|
|
/* Root Hub */
|
|
return "RHUB";
|
|
case 2:
|
|
/* USB2 ports */
|
|
switch (dev->path.usb.port_id) {
|
|
case 0: return "HS01";
|
|
case 1: return "HS02";
|
|
case 2: return "HS03";
|
|
case 3: return "HS04";
|
|
case 4: return "HS05";
|
|
case 5: return "HS06";
|
|
case 6: return "HS07";
|
|
case 7: return "HS08";
|
|
case 8: return "HS09";
|
|
case 9: return "HS10";
|
|
}
|
|
break;
|
|
case 3:
|
|
/* USB3 ports */
|
|
switch (dev->path.usb.port_id) {
|
|
case 0: return "SS01";
|
|
case 1: return "SS02";
|
|
case 2: return "SS03";
|
|
case 3: return "SS04";
|
|
}
|
|
break;
|
|
}
|
|
printk(BIOS_DEBUG, "dev->path.type=%x\n", dev->path.usb.port_type);
|
|
return NULL;
|
|
}
|
|
if (dev->path.type != DEVICE_PATH_PCI) {
|
|
printk(BIOS_DEBUG, "dev->path.type=%x\n", dev->path.type);
|
|
return NULL;
|
|
}
|
|
|
|
switch (dev->path.pci.devfn) {
|
|
case PCI_DEVFN_ROOT: return "MCHC";
|
|
case PCI_DEVFN_IGD: return "GFX0";
|
|
case PCI_DEVFN_TCSS_XHCI: return "TXHC";
|
|
case PCI_DEVFN_TCSS_XDCI: return "TXDC";
|
|
case PCI_DEVFN_TCSS_DMA0: return "TDM0";
|
|
case PCI_DEVFN_TCSS_DMA1: return "TDM1";
|
|
case PCI_DEVFN_TBT0: return "TRP0";
|
|
case PCI_DEVFN_TBT1: return "TRP1";
|
|
case PCI_DEVFN_TBT2: return "TRP2";
|
|
case PCI_DEVFN_TBT3: return "TRP3";
|
|
case PCI_DEVFN_IPU: return "IPU0";
|
|
case PCI_DEVFN_ISH: return "ISHB";
|
|
case PCI_DEVFN_GNA: return "GNA";
|
|
case PCI_DEVFN_XHCI: return "XHCI";
|
|
case PCI_DEVFN_I2C0: return "I2C0";
|
|
case PCI_DEVFN_I2C1: return "I2C1";
|
|
case PCI_DEVFN_I2C2: return "I2C2";
|
|
case PCI_DEVFN_I2C3: return "I2C3";
|
|
case PCI_DEVFN_I2C4: return "I2C4";
|
|
case PCI_DEVFN_I2C5: return "I2C5";
|
|
case PCI_DEVFN_SATA: return "SATA";
|
|
case PCI_DEVFN_PCIE1: return "RP01";
|
|
case PCI_DEVFN_PCIE2: return "RP02";
|
|
case PCI_DEVFN_PCIE3: return "RP03";
|
|
case PCI_DEVFN_PCIE4: return "RP04";
|
|
case PCI_DEVFN_PCIE5: return "RP05";
|
|
case PCI_DEVFN_PCIE6: return "RP06";
|
|
case PCI_DEVFN_PCIE7: return "RP07";
|
|
case PCI_DEVFN_PCIE8: return "RP08";
|
|
case PCI_DEVFN_PCIE9: return "RP09";
|
|
case PCI_DEVFN_PCIE10: return "RP10";
|
|
case PCI_DEVFN_PCIE11: return "RP11";
|
|
case PCI_DEVFN_PCIE12: return "RP12";
|
|
case PCI_DEVFN_PMC: return "PMC";
|
|
case PCI_DEVFN_UART0: return "UAR0";
|
|
case PCI_DEVFN_UART1: return "UAR1";
|
|
case PCI_DEVFN_UART2: return "UAR2";
|
|
case PCI_DEVFN_GSPI0: return "SPI0";
|
|
case PCI_DEVFN_GSPI1: return "SPI1";
|
|
case PCI_DEVFN_GSPI2: return "SPI2";
|
|
/* Keeping ACPI device name coherent with ec.asl */
|
|
case PCI_DEVFN_ESPI: return "LPCB";
|
|
case PCI_DEVFN_HDA: return "HDAS";
|
|
case PCI_DEVFN_SMBUS: return "SBUS";
|
|
case PCI_DEVFN_GBE: return "GLAN";
|
|
}
|
|
printk(BIOS_DEBUG, "Missing ACPI Name for PCI: 00:%02x.%01x\n",
|
|
PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn));
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG(SOC_INTEL_STORE_ISH_FW_VERSION)
|
|
/* SoC override API to identify if ISH Firmware existed inside CSE FPT */
|
|
bool soc_is_ish_partition_enabled(void)
|
|
{
|
|
struct device *ish = pcidev_path_on_root(PCI_DEVFN_ISH);
|
|
uint16_t ish_pci_id = ish ? pci_read_config16(ish, PCI_DEVICE_ID) : 0xFFFF;
|
|
|
|
if (ish_pci_id == 0xFFFF)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
#endif
|
|
|
|
/* SoC routine to fill GPIO PM mask and value for GPIO_MISCCFG register */
|
|
static void soc_fill_gpio_pm_configuration(void)
|
|
{
|
|
uint8_t value[TOTAL_GPIO_COMM];
|
|
const config_t *config = config_of_soc();
|
|
|
|
if (config->gpio_override_pm)
|
|
memcpy(value, config->gpio_pm, sizeof(value));
|
|
else
|
|
memset(value, MISCCFG_GPIO_PM_CONFIG_BITS, sizeof(value));
|
|
|
|
gpio_pm_configure(value, TOTAL_GPIO_COMM);
|
|
}
|
|
|
|
void soc_init_pre_device(void *chip_info)
|
|
{
|
|
config_t *config = config_of_soc();
|
|
|
|
/* Validate TBT image authentication */
|
|
config->tbt_authentication = ioe_p2sb_sbi_read(PID_IOM,
|
|
IOM_CSME_IMR_TBT_STATUS) & TBT_VALID_AUTHENTICATION;
|
|
|
|
/* Perform silicon specific init. */
|
|
fsp_silicon_init();
|
|
|
|
/* Display FIRMWARE_VERSION_INFO_HOB */
|
|
fsp_display_fvi_version_hob();
|
|
|
|
soc_fill_gpio_pm_configuration();
|
|
|
|
/* Swap enabled PCI ports in device tree if needed. */
|
|
pcie_rp_update_devicetree(get_pcie_rp_table());
|
|
|
|
/*
|
|
* Earlier when coreboot used to send EOP at late as possible caused
|
|
* issue of delayed response from CSE since CSE was busy loading payload.
|
|
* To resolve the issue, EOP should be sent earlier than current sequence
|
|
* in the boot sequence at BS_DEV_INIT.
|
|
*
|
|
* Intel CSE team recommends to send EOP close to FW init (between FSP-S
|
|
* exit and current boot sequence) to reduce message response time from
|
|
* CSE hence moving sending EOP to earlier stage.
|
|
*/
|
|
if (CONFIG(SOC_INTEL_CSE_SEND_EOP_EARLY) ||
|
|
CONFIG(SOC_INTEL_CSE_SEND_EOP_ASYNC)) {
|
|
printk(BIOS_INFO, "Sending EOP early from SoC\n");
|
|
cse_send_end_of_post();
|
|
}
|
|
}
|
|
|
|
static void cpu_fill_ssdt(const struct device *dev)
|
|
{
|
|
if (!generate_pin_irq_map())
|
|
printk(BIOS_ERR, "Failed to generate ACPI _PRT table!\n");
|
|
|
|
generate_cpu_entries(dev);
|
|
}
|
|
|
|
static void cpu_set_north_irqs(struct device *dev)
|
|
{
|
|
irq_program_non_pch();
|
|
}
|
|
|
|
static struct device_operations pci_domain_ops = {
|
|
.read_resources = &pci_domain_read_resources,
|
|
.set_resources = &pci_domain_set_resources,
|
|
.scan_bus = &pci_host_bridge_scan_bus,
|
|
#if CONFIG(HAVE_ACPI_TABLES)
|
|
.acpi_name = &soc_acpi_name,
|
|
.acpi_fill_ssdt = ssdt_set_above_4g_pci,
|
|
#endif
|
|
};
|
|
|
|
static struct device_operations cpu_bus_ops = {
|
|
.read_resources = noop_read_resources,
|
|
.set_resources = noop_set_resources,
|
|
.enable_resources = cpu_set_north_irqs,
|
|
#if CONFIG(HAVE_ACPI_TABLES)
|
|
.acpi_fill_ssdt = cpu_fill_ssdt,
|
|
#endif
|
|
};
|
|
|
|
static void soc_enable(struct device *dev)
|
|
{
|
|
/*
|
|
* Set the operations if it is a special bus type or a hidden PCI
|
|
* device.
|
|
*/
|
|
if (dev->path.type == DEVICE_PATH_DOMAIN)
|
|
dev->ops = &pci_domain_ops;
|
|
else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER)
|
|
dev->ops = &cpu_bus_ops;
|
|
else if (dev->path.type == DEVICE_PATH_PCI &&
|
|
dev->path.pci.devfn == PCI_DEVFN_PMC)
|
|
dev->ops = &pmc_ops;
|
|
else if (dev->path.type == DEVICE_PATH_PCI &&
|
|
dev->path.pci.devfn == PCI_DEVFN_IOE_PMC)
|
|
dev->ops = &ioe_pmc_ops;
|
|
else if (dev->path.type == DEVICE_PATH_PCI &&
|
|
dev->path.pci.devfn == PCI_DEVFN_P2SB)
|
|
dev->ops = &soc_p2sb_ops;
|
|
else if (dev->path.type == DEVICE_PATH_PCI &&
|
|
dev->path.pci.devfn == PCI_DEVFN_IOE_P2SB)
|
|
dev->ops = &ioe_p2sb_ops;
|
|
else if (dev->path.type == DEVICE_PATH_GPIO)
|
|
block_gpio_enable(dev);
|
|
}
|
|
|
|
static void soc_init_final_device(void *chip_info)
|
|
{
|
|
uint32_t reset_status = fsp_get_pch_reset_status();
|
|
|
|
if (reset_status == FSP_SUCCESS)
|
|
return;
|
|
|
|
/* Handle any pending reset request from previously executed FSP APIs */
|
|
fsp_handle_reset(reset_status);
|
|
|
|
/* Control shouldn't return here */
|
|
die_with_post_code(POSTCODE_HW_INIT_FAILURE,
|
|
"Failed to handle the FSP reset request with error 0x%08x\n", reset_status);
|
|
}
|
|
|
|
struct chip_operations soc_intel_meteorlake_ops = {
|
|
CHIP_NAME("Intel Meteorlake")
|
|
.enable_dev = &soc_enable,
|
|
.init = &soc_init_pre_device,
|
|
.final = &soc_init_final_device,
|
|
};
|