1217af5e1a
This board is compatible with Intel Skylake and Kaby Lake generation processors. This patch contains the minimum configuration for booting and stable operation of the Ubuntu OS (18.04.1, Linux kernel 4.15). It is based on Intel RVP8 mainboard. Intel Kaby Lake FSP 3.6.0 is used to initialize CPU and PCH. Graphics init with libgfxinit. Works: - Integrated graphics (only DVI port, tested with 1920x1080); - PEG x16 (FSP must be configured with BCT to enable PEG); - all PCIe x1 slots; - all USB and SATA ports; - SuperIO COM port for console; - onboard audio. TODO: - other SuperIO functions; - onboard network chip; - suspend and resume; - documentation. Tested on Intel Core i5-6600 processor with Seabios (rel-1.12.0-10- g171fc89) and Tianocore/edk2 (vUDK2018-8-ge6eccfc) as a payload. Change-Id: I69396edc50948cf1d0da649241ce92171d32daf7 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
368 lines
12 KiB
Plaintext
368 lines
12 KiB
Plaintext
##
|
|
## This file is part of the coreboot project.
|
|
##
|
|
## Copyright (C) 2017 Intel Corporation.
|
|
## Copyright (C) 2019 Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
##
|
|
## This program is free software; you can redistribute it and/or modify
|
|
## it under the terms of the GNU General Public License as published by
|
|
## the Free Software Foundation; version 2 of the License.
|
|
##
|
|
## This program is distributed in the hope that it will be useful,
|
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
## GNU General Public License for more details.
|
|
##
|
|
|
|
chip soc/intel/skylake
|
|
|
|
# Enable deep Sx states
|
|
register "deep_s3_enable_ac" = "0"
|
|
register "deep_s3_enable_dc" = "0"
|
|
register "deep_s5_enable_ac" = "0"
|
|
register "deep_s5_enable_dc" = "0"
|
|
register "deep_sx_config" = "DSX_EN_WAKE_PIN"
|
|
|
|
register "eist_enable" = "1"
|
|
|
|
# GPE configuration
|
|
# Note that GPE events called out in ASL code rely on this
|
|
# route. i.e. If this route changes then the affected GPE
|
|
# offset bits also need to be changed.
|
|
register "gpe0_dw0" = "GPP_B"
|
|
register "gpe0_dw1" = "GPP_D"
|
|
register "gpe0_dw2" = "GPP_E"
|
|
|
|
# Enable "Intel Speed Shift Technology"
|
|
register "speed_shift_enable" = "1"
|
|
|
|
# Enable DPTF
|
|
register "dptf_enable" = "1"
|
|
|
|
# FSP Configuration
|
|
register "SmbusEnable" = "1"
|
|
register "ScsEmmcEnabled" = "0"
|
|
register "ScsEmmcHs400Enabled" = "0"
|
|
register "ScsSdCardEnabled" = "0"
|
|
register "HeciEnabled" = "0"
|
|
register "InternalGfx" = "1"
|
|
register "SkipExtGfxScan" = "0"
|
|
register "Device4Enable" = "1"
|
|
register "SaGv" = "SaGv_Enabled"
|
|
register "PmTimerDisabled" = "0"
|
|
register "EnableAzalia" = "1"
|
|
register "DspEnable" = "0"
|
|
|
|
register "pirqa_routing" = "PCH_IRQ11"
|
|
register "pirqb_routing" = "PCH_IRQ10"
|
|
register "pirqc_routing" = "PCH_IRQ11"
|
|
register "pirqd_routing" = "PCH_IRQ11"
|
|
register "pirqe_routing" = "PCH_IRQ11"
|
|
register "pirqf_routing" = "PCH_IRQ11"
|
|
register "pirqg_routing" = "PCH_IRQ11"
|
|
register "pirqh_routing" = "PCH_IRQ11"
|
|
|
|
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
|
|
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
|
|
register "PmConfigSlpS3MinAssert" = "0x02"
|
|
|
|
# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
|
|
register "PmConfigSlpS4MinAssert" = "0x04"
|
|
|
|
# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
|
|
register "PmConfigSlpSusMinAssert" = "0x03"
|
|
|
|
# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
|
|
register "PmConfigSlpAMinAssert" = "0x03"
|
|
|
|
# VR Settings Configuration for 5 Domains
|
|
#+----------------+-------+-------+-------------+-------------+-------+
|
|
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
|
|
#+----------------+-------+-------+-------------+-------------+-------+
|
|
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
|
|
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
|
|
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
|
|
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
|
|
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
|
|
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
|
|
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
|
|
#| IccMax | 7A | 34A | 34A | 35A | 35A |
|
|
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
|
|
#+----------------+-------+-------+-------------+-------------+-------+
|
|
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
|
.vr_config_enable = 1, \
|
|
.psi1threshold = 0x50, \
|
|
.psi2threshold = 0x10, \
|
|
.psi3threshold = 0x4, \
|
|
.psi3enable = 1, \
|
|
.psi4enable = 1, \
|
|
.imon_slope = 0x0, \
|
|
.imon_offset = 0x0, \
|
|
.icc_max = 0x0, \
|
|
.voltage_limit = 0x0 \
|
|
}"
|
|
|
|
register "domain_vr_config[VR_IA_CORE]" = "{
|
|
.vr_config_enable = 1, \
|
|
.psi1threshold = 0x50, \
|
|
.psi2threshold = 0x14, \
|
|
.psi3threshold = 0x4, \
|
|
.psi3enable = 1, \
|
|
.psi4enable = 1, \
|
|
.imon_slope = 0x0, \
|
|
.imon_offset = 0x0, \
|
|
.icc_max = 0x0, \
|
|
.voltage_limit = 0x0 \
|
|
}"
|
|
|
|
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
|
.vr_config_enable = 1, \
|
|
.psi1threshold = 0x50, \
|
|
.psi2threshold = 0x14, \
|
|
.psi3threshold = 0x4, \
|
|
.psi3enable = 1, \
|
|
.psi4enable = 1, \
|
|
.imon_slope = 0x0, \
|
|
.imon_offset = 0x0, \
|
|
.icc_max = 0x0 ,\
|
|
.voltage_limit = 0x0 \
|
|
}"
|
|
|
|
register "domain_vr_config[VR_GT_SLICED]" = "{
|
|
.vr_config_enable = 1, \
|
|
.psi1threshold = 0x50, \
|
|
.psi2threshold = 0x14, \
|
|
.psi3threshold = 0x4, \
|
|
.psi3enable = 1, \
|
|
.psi4enable = 1, \
|
|
.imon_slope = 0x0, \
|
|
.imon_offset = 0x0, \
|
|
.icc_max = 0x0, \
|
|
.voltage_limit = 0x0 \
|
|
}"
|
|
|
|
register "EnableLan" = "0"
|
|
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
|
|
|
|
register "PmTimerDisabled" = "0"
|
|
|
|
# USB
|
|
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
|
|
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
|
|
register "usb2_ports[2]" = "USB2_PORT_MID(OC4)"
|
|
register "usb2_ports[3]" = "USB2_PORT_MID(OC4)"
|
|
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
|
|
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
|
|
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
|
|
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
|
|
register "usb2_ports[8]" = "USB2_PORT_MID(OC0)"
|
|
register "usb2_ports[9]" = "USB2_PORT_MID(OC0)"
|
|
register "usb2_ports[10]" = "USB2_PORT_MID(OC1)"
|
|
register "usb2_ports[11]" = "USB2_PORT_MID(OC1)"
|
|
register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)"
|
|
register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)"
|
|
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
|
|
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
|
|
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"
|
|
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
|
|
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)"
|
|
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)"
|
|
register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
|
register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
|
register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
|
register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)"
|
|
|
|
# SATA
|
|
register "EnableSata" = "1"
|
|
register "SataSalpSupport" = "1"
|
|
register "SataPortsEnable" = "{ \
|
|
[0] = 1, \
|
|
[1] = 1, \
|
|
[2] = 1, \
|
|
[3] = 1, \
|
|
[4] = 1, \
|
|
[5] = 1, \
|
|
[6] = 1, \
|
|
[7] = 1, \
|
|
}"
|
|
|
|
# PCH UART, SPI, I2C
|
|
register "SerialIoDevMode" = "{ \
|
|
[PchSerialIoIndexI2C0] = PchSerialIoPci, \
|
|
[PchSerialIoIndexI2C1] = PchSerialIoPci, \
|
|
[PchSerialIoIndexI2C2] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexI2C3] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexI2C4] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexI2C5] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexSpi0] = PchSerialIoPci, \
|
|
[PchSerialIoIndexSpi1] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexUart0] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexUart1] = PchSerialIoDisabled, \
|
|
[PchSerialIoIndexUart2] = PchSerialIoDisabled, \
|
|
}"
|
|
|
|
# Enable Root port 6(x1) for LAN.
|
|
register "PcieRpEnable[5]" = "1"
|
|
# Enable CLKREQ#
|
|
register "PcieRpClkReqSupport[5]" = "1"
|
|
# Use SRCCLKREQ1#
|
|
register "PcieRpClkReqNumber[5]" = "1"
|
|
# Enable Advanced Error Reporting
|
|
register "PcieRpAdvancedErrorReporting[5]" = "1"
|
|
# Enable Latency Tolerance Reporting Mechanism
|
|
register "PcieRpLtrEnable[5]" = "1"
|
|
# Use CLK SRC 1
|
|
register "PcieRpClkSrcNumber[5]" = "1"
|
|
|
|
# Enable Root port 5 (x1) for PCIE slot.
|
|
register "PcieRpEnable[4]" = "1"
|
|
# Enable CLKREQ#
|
|
register "PcieRpClkReqSupport[4]" = "1"
|
|
# Use SRCCLKREQ2#
|
|
register "PcieRpClkReqNumber[4]" = "2"
|
|
# Enable Advanced Error Reporting
|
|
register "PcieRpAdvancedErrorReporting[4]" = "1"
|
|
# Enable Latency Tolerance Reporting Mechanism
|
|
register "PcieRpLtrEnable[4]" = "1"
|
|
# Use CLK SRC 2
|
|
register "PcieRpClkSrcNumber[4]" = "2"
|
|
# Use Hot Plug subsystem
|
|
register "PcieRpHotPlug[4]" = "1"
|
|
|
|
# Enable Root port 7(x1) for PCIE slot.
|
|
register "PcieRpEnable[6]" = "1"
|
|
# Enable CLKREQ#
|
|
register "PcieRpClkReqSupport[6]" = "1"
|
|
# Use SRCCLKREQ3#
|
|
register "PcieRpClkReqNumber[6]" = "3"
|
|
# Enable Advanced Error Reporting
|
|
register "PcieRpAdvancedErrorReporting[6]" = "1"
|
|
# Enable Latency Tolerance Reporting Mechanism
|
|
register "PcieRpLtrEnable[6]" = "1"
|
|
# Use CLK SRC 3
|
|
register "PcieRpClkSrcNumber[6]" = "3"
|
|
# Use Hot Plug subsystem
|
|
register "PcieRpHotPlug[6]" = "1"
|
|
|
|
# PL2 override 91W
|
|
register "tdp_pl2_override" = "91"
|
|
|
|
# Send an extra VR mailbox command for the PS4 exit issue
|
|
register "SendVrMbxCmd" = "2"
|
|
|
|
device cpu_cluster 0 on
|
|
device lapic 0 on end
|
|
end
|
|
device domain 0 on
|
|
device pci 00.0 on # Host Bridge
|
|
subsystemid 0x1849 0x191f
|
|
end
|
|
device pci 01.0 on # PEG
|
|
subsystemid 0x1849 0x1901
|
|
end
|
|
device pci 02.0 on # Integrated Graphics Device
|
|
subsystemid 0x1849 0x1912
|
|
end
|
|
device pci 14.0 on # USB xHCI
|
|
subsystemid 0x1849 0xa131
|
|
end
|
|
device pci 14.1 off end # USB xDCI (OTG)
|
|
device pci 14.2 on # Thermal Subsystem
|
|
subsystemid 0x1849 0xa131
|
|
end
|
|
device pci 15.0 off end # I2C #0
|
|
device pci 15.1 off end # I2C #1
|
|
device pci 15.2 off end # I2C #2
|
|
device pci 15.3 off end # I2C #3
|
|
device pci 16.0 on # Management Engine Interface 1
|
|
subsystemid 0x1849 0xa131
|
|
end
|
|
device pci 16.1 off end # Management Engine Interface 2
|
|
device pci 16.2 off end # Management Engine IDE-R
|
|
device pci 16.3 off end # Management Engine KT Redirection
|
|
device pci 16.4 off end # Management Engine Interface 3
|
|
device pci 17.0 on # SATA
|
|
subsystemid 0x1849 0xa102
|
|
end
|
|
device pci 19.0 off end # UART #2
|
|
device pci 19.1 off end # I2C #5
|
|
device pci 19.2 off end # I2C #4
|
|
device pci 1c.0 on end # PCI Express Port 1
|
|
device pci 1c.1 off end # PCI Express Port 2
|
|
device pci 1c.2 off end # PCI Express Port 3
|
|
device pci 1c.3 off end # PCI Express Port 4
|
|
device pci 1c.4 on end # PCI Express Port 5
|
|
device pci 1c.5 on end # PCI Express Port 6
|
|
device pci 1c.6 on end # PCI Express Port 7
|
|
device pci 1c.7 off end # PCI Express Port 8
|
|
device pci 1d.0 off end # PCI Express Port 9
|
|
device pci 1d.1 off end # PCI Express Port 10
|
|
device pci 1d.2 off end # PCI Express Port 11
|
|
device pci 1d.3 off end # PCI Express Port 12
|
|
device pci 1e.0 off end # UART #0
|
|
device pci 1e.1 off end # UART #1
|
|
device pci 1e.2 off end # GSPI #0
|
|
device pci 1e.3 off end # GSPI #1
|
|
device pci 1e.4 off end # eMMC
|
|
device pci 1e.5 off end # SDIO
|
|
device pci 1e.6 off end # SDCard
|
|
device pci 1f.0 on # LPC bridge
|
|
subsystemid 0x1849 0x1a43
|
|
chip superio/nuvoton/nct6791d
|
|
device pnp 2e.0 off end # Floppy
|
|
device pnp 2e.1 on # Parallel
|
|
# global
|
|
irq 0x1c = 0x10
|
|
irq 0x27 = 0x10
|
|
irq 0x2a = 0x64
|
|
# parallel port
|
|
io 0x60 = 0x0378
|
|
irq 0x70 = 7
|
|
drq 0x74 = 4 # No DMA
|
|
irq 0xf0 = 0x3c # Printer mode
|
|
end
|
|
device pnp 2e.2 on # UART A
|
|
io 0x60 = 0x03f8
|
|
irq 0x70 = 4
|
|
end
|
|
device pnp 2e.3 on # IR
|
|
io 0x60 = 0x02f8
|
|
irq 0x70 = 3
|
|
end
|
|
device pnp 2e.5 on # PS/2 KBC
|
|
io 0x60 = 0x0060
|
|
io 0x62 = 0x0064
|
|
irq 0x70 = 1 # Keyboard
|
|
irq 0x72 = 12 # Mouse
|
|
end
|
|
device pnp 2e.6 off end # CIR
|
|
device pnp 2e.7 off end # GPIO6..8
|
|
# WDT1, WDT_MEM, GPIO 0, GPIO 1
|
|
device pnp 2e.8 off end
|
|
# GPIO 2, GPIO 3, GPIO 4, GPIO 5
|
|
device pnp 2e.9 off end
|
|
device pnp 2e.a off end # ACPI
|
|
device pnp 2e.b on # HWM, LED
|
|
io 0x60 = 0x0290
|
|
io 0x62 = 0
|
|
irq 0x70 = 0
|
|
end
|
|
device pnp 2e.d off end # BCLK, WDT2, WDT_MEM
|
|
device pnp 2e.e off end # CIR wake-up
|
|
device pnp 2e.f off end # GPIO PP/OD
|
|
device pnp 2e.14 off end # SVID, Port 80 UART
|
|
device pnp 2e.16 off end # Deep sleep
|
|
end # superio/nuvoton/nct6791d
|
|
chip drivers/pc80/tpm
|
|
device pnp 4e.0 on end # TPM module
|
|
end
|
|
end # LPC Interface
|
|
device pci 1f.1 on end # P2SB
|
|
device pci 1f.2 on end # Power Management Controller
|
|
device pci 1f.3 on end # Intel HDA
|
|
device pci 1f.4 on end # SMBus
|
|
device pci 1f.5 on end # PCH SPI
|
|
device pci 1f.6 off end # GbE
|
|
end
|
|
end
|