This device is extremely similar to the IT8718F, so support is based on existing support for the IT8718F. The CIR device is only detected by Linux/Windows from the ACPI tables, so ACPI support is extended from the IT8783E/F (for ACPI). This Super I/O is used on the Foxconn G41S-K. Tested, working: * Serial port 1 * Environment controller - Temperature monitoring - Voltage monitoring - Fan control (automatic and manual) * PS/2 keyboard and mouse Appears, OS driver loads, but otherwise untested: * Serial port 2 * Consumer IR Untested: * Floppy controller * Parallel port * GPIO Change-Id: Ib9a6fe91a772d78f4d122a6c516feff8658ada0a Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
212 lines
6.0 KiB
Plaintext
212 lines
6.0 KiB
Plaintext
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright (C) 2011 Christoph Grenz <christophg+cb@grenz-bonn.de>
|
|
* Copyright (C) 2013, 2016 secunet Security Networks AG
|
|
* Copyright (C) 2017 Samuel Holland <samuel@sholland.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* Include this file into a mainboard's DSDT _SB device tree and it will
|
|
* expose the IT8720F SuperIO and some of its functionality.
|
|
*
|
|
* It allows the change of IO ports, IRQs and DMA settings on logical
|
|
* devices, disabling and reenabling logical devices.
|
|
*
|
|
* LDN State
|
|
* 0x0 FDC Not implemented
|
|
* 0x1 SP1 Implemented, untested
|
|
* 0x2 SP2 Implemented, untested
|
|
* 0x3 PP Not implemented
|
|
* 0x4 EC Implemented, untested
|
|
* 0x5 KBCK Implemented, untested
|
|
* 0x6 KBCM Implemented, untested
|
|
* 0x7 GPIO Implemented, untested
|
|
* 0xa CIR Implemented, untested
|
|
*
|
|
* Controllable through preprocessor defines:
|
|
* SUPERIO_DEV Device identifier for this SIO (e.g. SIO0)
|
|
* SUPERIO_PNP_BASE I/O address of the first PnP configuration register
|
|
* IT8720F_SHOW_SP1 If defined, Serial Port 1 will be exposed.
|
|
* IT8720F_SHOW_SP2 If defined, Serial Port 2 will be exposed.
|
|
* IT8720F_SHOW_EC If defined, the Environment Controller will be exposed.
|
|
* IT8720F_SHOW_KBCK If defined, the Keyboard Controller will be exposed.
|
|
* IT8720F_SHOW_KBCM If defined, PS/2 mouse support will be exposed.
|
|
* IT8720F_SHOW_GPIO If defined, GPIO support will be exposed.
|
|
* IT8720F_SHOW_CIR If defined, Consumer IR support will be exposed.
|
|
*/
|
|
|
|
#undef SUPERIO_CHIP_NAME
|
|
#define SUPERIO_CHIP_NAME IT8720F
|
|
#include <superio/acpi/pnp.asl>
|
|
|
|
#undef PNP_DEFAULT_PSC
|
|
#define PNP_DEFAULT_PSC Return (0) /* no power management */
|
|
|
|
#define CONFIGURE_CONTROL CCTL
|
|
|
|
Device(SUPERIO_DEV) {
|
|
Name (_HID, EisaId("PNP0A05"))
|
|
Name (_STR, Unicode("ITE IT8720F Super I/O"))
|
|
Name (_UID, SUPERIO_UID(SUPERIO_DEV,))
|
|
|
|
/* SuperIO configuration ports */
|
|
OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02)
|
|
Field (CREG, ByteAcc, NoLock, Preserve)
|
|
{
|
|
PNP_ADDR_REG, 8,
|
|
PNP_DATA_REG, 8
|
|
}
|
|
IndexField (ADDR, DATA, ByteAcc, NoLock, Preserve)
|
|
{
|
|
Offset (0x02),
|
|
CONFIGURE_CONTROL, 8, /* Global configure control */
|
|
|
|
Offset (0x07),
|
|
PNP_LOGICAL_DEVICE, 8, /* Logical device selector */
|
|
|
|
Offset (0x30),
|
|
PNP_DEVICE_ACTIVE, 1, /* Logical device activation */
|
|
|
|
Offset (0x60),
|
|
PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */
|
|
PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */
|
|
Offset (0x62),
|
|
PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */
|
|
PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */
|
|
Offset (0x64),
|
|
PNP_IO2_HIGH_BYTE, 8, /* Third I/O port base - high byte */
|
|
PNP_IO2_LOW_BYTE, 8, /* Third I/O port base - low byte */
|
|
|
|
Offset (0x70),
|
|
PNP_IRQ0, 8, /* First IRQ */
|
|
}
|
|
|
|
Method (_CRS)
|
|
{
|
|
/* Announce the used I/O ports to the OS */
|
|
Return (ResourceTemplate () {
|
|
IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02)
|
|
})
|
|
}
|
|
|
|
#undef PNP_ENTER_MAGIC_1ST
|
|
#undef PNP_ENTER_MAGIC_2ND
|
|
#undef PNP_ENTER_MAGIC_3RD
|
|
#undef PNP_ENTER_MAGIC_4TH
|
|
#undef PNP_EXIT_MAGIC_1ST
|
|
#undef PNP_EXIT_SPECIAL_REG
|
|
#undef PNP_EXIT_SPECIAL_VAL
|
|
#define PNP_ENTER_MAGIC_1ST 0x87
|
|
#define PNP_ENTER_MAGIC_2ND 0x01
|
|
#define PNP_ENTER_MAGIC_3RD 0x55
|
|
#if SUPERIO_PNP_BASE == 0x2e
|
|
#define PNP_ENTER_MAGIC_4TH 0x55
|
|
#else
|
|
#define PNP_ENTER_MAGIC_4TH 0xaa
|
|
#endif
|
|
#define PNP_EXIT_SPECIAL_REG CONFIGURE_CONTROL
|
|
#define PNP_EXIT_SPECIAL_VAL 0x02
|
|
#include <superio/acpi/pnp_config.asl>
|
|
|
|
#ifdef IT8720F_SHOW_SP1
|
|
#undef SUPERIO_UART_LDN
|
|
#undef SUPERIO_UART_DDN
|
|
#undef SUPERIO_UART_PM_REG
|
|
#undef SUPERIO_UART_PM_VAL
|
|
#undef SUPERIO_UART_PM_LDN
|
|
#define SUPERIO_UART_LDN 1
|
|
#include <superio/acpi/pnp_uart.asl>
|
|
#endif
|
|
|
|
#ifdef IT8720F_SHOW_SP2
|
|
#undef SUPERIO_UART_LDN
|
|
#undef SUPERIO_UART_DDN
|
|
#undef SUPERIO_UART_PM_REG
|
|
#undef SUPERIO_UART_PM_VAL
|
|
#undef SUPERIO_UART_PM_LDN
|
|
#define SUPERIO_UART_LDN 2
|
|
#include <superio/acpi/pnp_uart.asl>
|
|
#endif
|
|
|
|
#ifdef IT8720F_SHOW_EC
|
|
#undef SUPERIO_PNP_HID
|
|
#undef SUPERIO_PNP_LDN
|
|
#undef SUPERIO_PNP_DDN
|
|
#undef SUPERIO_PNP_PM_REG
|
|
#undef SUPERIO_PNP_PM_VAL
|
|
#undef SUPERIO_PNP_PM_LDN
|
|
#undef SUPERIO_PNP_IO0
|
|
#undef SUPERIO_PNP_IO1
|
|
#undef SUPERIO_PNP_IO2
|
|
#undef SUPERIO_PNP_IRQ0
|
|
#undef SUPERIO_PNP_IRQ1
|
|
#undef SUPERIO_PNP_DMA
|
|
#define SUPERIO_PNP_LDN 4
|
|
#define SUPERIO_PNP_IO0 0x08, 0x08
|
|
#define SUPERIO_PNP_IO1 0x08, 0x04
|
|
#define SUPERIO_PNP_IRQ0
|
|
#include <superio/acpi/pnp_generic.asl>
|
|
#endif
|
|
|
|
#ifdef IT8720F_SHOW_KBC
|
|
#undef SUPERIO_KBC_LDN
|
|
#undef SUPERIO_KBC_PS2M
|
|
#undef SUPERIO_KBC_PS2LDN
|
|
#define SUPERIO_KBC_LDN 5
|
|
#ifdef IT8720F_SHOW_PS2M
|
|
#define SUPERIO_KBC_PS2LDN 6
|
|
#endif
|
|
#include <superio/acpi/pnp_kbc.asl>
|
|
#endif
|
|
|
|
#ifdef IT8720F_SHOW_GPIO
|
|
#undef SUPERIO_PNP_HID
|
|
#undef SUPERIO_PNP_LDN
|
|
#undef SUPERIO_PNP_DDN
|
|
#undef SUPERIO_PNP_PM_REG
|
|
#undef SUPERIO_PNP_PM_VAL
|
|
#undef SUPERIO_PNP_PM_LDN
|
|
#undef SUPERIO_PNP_IO0
|
|
#undef SUPERIO_PNP_IO1
|
|
#undef SUPERIO_PNP_IO2
|
|
#undef SUPERIO_PNP_IRQ0
|
|
#undef SUPERIO_PNP_IRQ1
|
|
#undef SUPERIO_PNP_DMA
|
|
#define SUPERIO_PNP_LDN 7
|
|
#define SUPERIO_PNP_IO0 0x08, 0x08
|
|
#define SUPERIO_PNP_IO1 0x08, 0x08
|
|
#define SUPERIO_PNP_IO2 0x08, 0x08
|
|
#include <superio/acpi/pnp_generic.asl>
|
|
#endif
|
|
|
|
#ifdef IT8720F_SHOW_CIR
|
|
#undef SUPERIO_PNP_HID
|
|
#undef SUPERIO_PNP_LDN
|
|
#undef SUPERIO_PNP_DDN
|
|
#undef SUPERIO_PNP_PM_REG
|
|
#undef SUPERIO_PNP_PM_VAL
|
|
#undef SUPERIO_PNP_PM_LDN
|
|
#undef SUPERIO_PNP_IO0
|
|
#undef SUPERIO_PNP_IO1
|
|
#undef SUPERIO_PNP_IO2
|
|
#undef SUPERIO_PNP_IRQ0
|
|
#undef SUPERIO_PNP_IRQ1
|
|
#undef SUPERIO_PNP_DMA
|
|
#define SUPERIO_PNP_HID "ITE8704"
|
|
#define SUPERIO_PNP_LDN 10
|
|
#define SUPERIO_PNP_IO0 0x08, 0x08
|
|
#define SUPERIO_PNP_IRQ0
|
|
#include <superio/acpi/pnp_generic.asl>
|
|
#endif
|
|
}
|