Files
system76-coreboot/src
Michael Niewöhner 31830d3c2c drivers/ipmi: add code to set BMC/IPMI enablement from jumper
Some boards, like the Supermicro X11SSM-F, have a jumper for enabling or
disabling the BMC and IPMI. Add a new devicetree driver option to set
the GPIO used for the jumper and enable or disable IPMI according to its
value.

This gets used in a follow-up change by Supermicro X11SSM-F.

Test: Boot with jumper set to each enabled and disabled and check debug
log if IPMI gets enabled/disabled accordingly.

Successfully tested on Supermicro X11SSM-F with CB:48095.

Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Icde3232843a7138797a4b106560f170972edeb9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30 00:30:23 +00:00
..
2020-12-21 02:38:20 +00:00
2020-12-02 23:35:58 +00:00
2020-12-28 21:01:08 +00:00
2020-12-28 21:01:08 +00:00
2020-12-25 02:29:14 +00:00