Introduce the `SPD_MEMORY_DOWN` macro to indicate that a slot is used with memory-down. This enables computing the channel disable masks as the bits for slots where the SPD address is zero. To preserve current behavior, zero the SPD addresses for memory-down slots afterwards. Change-Id: I75b7be7c72062d1a26cfc7b09b79de62de0a9cea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55807 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
231 lines
6.7 KiB
C
231 lines
6.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <assert.h>
|
|
#include <cbfs.h>
|
|
#include <cbmem.h>
|
|
#include <cf9_reset.h>
|
|
#include <console/console.h>
|
|
#include <device/pci_def.h>
|
|
#include <memory_info.h>
|
|
#include <mrc_cache.h>
|
|
#include <string.h>
|
|
#include <soc/iomap.h>
|
|
#include <soc/pei_data.h>
|
|
#include <soc/pei_wrapper.h>
|
|
#include <soc/pm.h>
|
|
#include <soc/romstage.h>
|
|
#include <soc/systemagent.h>
|
|
#include <timestamp.h>
|
|
|
|
static void save_mrc_data(struct pei_data *pei_data)
|
|
{
|
|
printk(BIOS_DEBUG, "MRC data at %p %d bytes\n", pei_data->data_to_save,
|
|
pei_data->data_to_save_size);
|
|
|
|
if (pei_data->data_to_save != NULL && pei_data->data_to_save_size > 0)
|
|
mrc_cache_stash_data(MRC_TRAINING_DATA, 0,
|
|
pei_data->data_to_save,
|
|
pei_data->data_to_save_size);
|
|
}
|
|
|
|
static const char *const ecc_decoder[] = {
|
|
"inactive",
|
|
"active on IO",
|
|
"disabled on IO",
|
|
"active",
|
|
};
|
|
|
|
/*
|
|
* Dump in the log memory controller configuration as read from the memory
|
|
* controller registers.
|
|
*/
|
|
static void report_memory_config(void)
|
|
{
|
|
int i;
|
|
|
|
const u32 addr_decoder_common = mchbar_read32(MAD_CHNL);
|
|
|
|
printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n",
|
|
(mchbar_read32(MC_BIOS_DATA) * 13333 * 2 + 50) / 100);
|
|
|
|
printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n",
|
|
(addr_decoder_common >> 0) & 3,
|
|
(addr_decoder_common >> 2) & 3,
|
|
(addr_decoder_common >> 4) & 3);
|
|
|
|
for (i = 0; i < NUM_CHANNELS; i++) {
|
|
const u32 ch_conf = mchbar_read32(MAD_DIMM(i));
|
|
|
|
printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
|
|
printk(BIOS_DEBUG, " ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
|
|
printk(BIOS_DEBUG, " enhanced interleave mode %s\n",
|
|
((ch_conf >> 22) & 1) ? "on" : "off");
|
|
|
|
printk(BIOS_DEBUG, " rank interleave %s\n",
|
|
((ch_conf >> 21) & 1) ? "on" : "off");
|
|
|
|
printk(BIOS_DEBUG, " DIMMA %d MB width %s %s rank%s\n",
|
|
((ch_conf >> 0) & 0xff) * 256,
|
|
((ch_conf >> 19) & 1) ? "x16" : "x8 or x32",
|
|
((ch_conf >> 17) & 1) ? "dual" : "single",
|
|
((ch_conf >> 16) & 1) ? "" : ", selected");
|
|
|
|
printk(BIOS_DEBUG, " DIMMB %d MB width %s %s rank%s\n",
|
|
((ch_conf >> 8) & 0xff) * 256,
|
|
((ch_conf >> 20) & 1) ? "x16" : "x8 or x32",
|
|
((ch_conf >> 18) & 1) ? "dual" : "single",
|
|
((ch_conf >> 16) & 1) ? ", selected" : "");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Find PEI executable in coreboot filesystem and execute it.
|
|
*/
|
|
static void sdram_initialize(struct pei_data *pei_data)
|
|
{
|
|
size_t mrc_size;
|
|
pei_wrapper_entry_t entry;
|
|
int ret;
|
|
|
|
broadwell_fill_pei_data(pei_data);
|
|
|
|
/* Assume boot device is memory mapped. */
|
|
assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED));
|
|
|
|
pei_data->saved_data =
|
|
mrc_cache_current_mmap_leak(MRC_TRAINING_DATA, 0,
|
|
&mrc_size);
|
|
if (pei_data->saved_data) {
|
|
/* MRC cache found */
|
|
pei_data->saved_data_size = mrc_size;
|
|
} else if (pei_data->boot_mode == ACPI_S3) {
|
|
/* Waking from S3 and no cache. */
|
|
printk(BIOS_DEBUG,
|
|
"No MRC cache found in S3 resume path.\n");
|
|
post_code(POST_RESUME_FAILURE);
|
|
system_reset();
|
|
} else {
|
|
printk(BIOS_DEBUG, "No MRC cache found.\n");
|
|
}
|
|
|
|
/*
|
|
* Do not use saved pei data. Can be set by mainboard romstage
|
|
* to force a full train of memory on every boot.
|
|
*/
|
|
if (pei_data->disable_saved_data) {
|
|
printk(BIOS_DEBUG, "Disabling PEI saved data by request\n");
|
|
pei_data->saved_data = NULL;
|
|
pei_data->saved_data_size = 0;
|
|
}
|
|
|
|
/* We don't care about leaking the mapping */
|
|
entry = cbfs_ro_map("mrc.bin", NULL);
|
|
if (entry == NULL)
|
|
die("mrc.bin not found!");
|
|
|
|
printk(BIOS_DEBUG, "Starting Memory Reference Code\n");
|
|
|
|
ret = entry(pei_data);
|
|
if (ret < 0)
|
|
die("pei_data version mismatch\n");
|
|
|
|
/* Print the MRC version after executing the UEFI PEI stage. */
|
|
u32 version = mchbar_read32(MRC_REVISION);
|
|
printk(BIOS_DEBUG, "MRC Version %u.%u.%u Build %u\n",
|
|
(version >> 24) & 0xff, (version >> 16) & 0xff,
|
|
(version >> 8) & 0xff, (version >> 0) & 0xff);
|
|
|
|
report_memory_config();
|
|
}
|
|
|
|
static void setup_sdram_meminfo(struct pei_data *pei_data)
|
|
{
|
|
struct memory_info *mem_info;
|
|
|
|
printk(BIOS_DEBUG, "create cbmem for dimm information\n");
|
|
mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info));
|
|
|
|
if (!mem_info) {
|
|
printk(BIOS_ERR, "Error! Failed to add mem_info to cbmem\n");
|
|
return;
|
|
}
|
|
|
|
memset(mem_info, 0, sizeof(*mem_info));
|
|
/* Translate pei_memory_info struct data into memory_info struct */
|
|
mem_info->dimm_cnt = pei_data->meminfo.dimm_cnt;
|
|
for (int i = 0; i < MIN(DIMM_INFO_TOTAL, PEI_DIMM_INFO_TOTAL); i++) {
|
|
struct dimm_info *dimm = &mem_info->dimm[i];
|
|
const struct pei_dimm_info *pei_dimm =
|
|
&pei_data->meminfo.dimm[i];
|
|
dimm->dimm_size = pei_dimm->dimm_size;
|
|
dimm->ddr_type = pei_dimm->ddr_type;
|
|
dimm->ddr_frequency = pei_dimm->ddr_frequency;
|
|
dimm->rank_per_dimm = pei_dimm->rank_per_dimm;
|
|
dimm->channel_num = pei_dimm->channel_num;
|
|
dimm->dimm_num = pei_dimm->dimm_num;
|
|
dimm->bank_locator = pei_dimm->bank_locator;
|
|
memcpy(&dimm->serial, &pei_dimm->serial,
|
|
MIN(sizeof(dimm->serial), sizeof(pei_dimm->serial)));
|
|
memcpy(&dimm->module_part_number,
|
|
&pei_dimm->module_part_number,
|
|
MIN(sizeof(dimm->module_part_number),
|
|
sizeof(pei_dimm->module_part_number)));
|
|
dimm->module_part_number[DIMM_INFO_PART_NUMBER_SIZE - 1] = '\0';
|
|
dimm->mod_id = pei_dimm->mod_id;
|
|
dimm->mod_type = pei_dimm->mod_type;
|
|
dimm->bus_width = pei_dimm->bus_width;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* 0 = leave channel enabled
|
|
* 1 = disable dimm 0 on channel
|
|
* 2 = disable dimm 1 on channel
|
|
* 3 = disable dimm 0+1 on channel
|
|
*/
|
|
static int make_channel_disabled_mask(const struct pei_data *pd, int ch)
|
|
{
|
|
return (!pd->spd_addresses[ch + ch] << 0) | (!pd->spd_addresses[ch + ch + 1] << 1);
|
|
}
|
|
|
|
void perform_raminit(const struct chipset_power_state *const power_state)
|
|
{
|
|
const int s3resume = power_state->prev_sleep_state == ACPI_S3;
|
|
|
|
struct pei_data pei_data = { 0 };
|
|
|
|
mainboard_fill_pei_data(&pei_data);
|
|
mainboard_fill_spd_data(&pei_data);
|
|
|
|
/* Calculate unimplemented DIMM slots for each channel */
|
|
pei_data.dimm_channel0_disabled = make_channel_disabled_mask(&pei_data, 0);
|
|
pei_data.dimm_channel1_disabled = make_channel_disabled_mask(&pei_data, 1);
|
|
|
|
for (size_t i = 0; i < ARRAY_SIZE(pei_data.spd_addresses); i++) {
|
|
const uint8_t addr = pei_data.spd_addresses[i];
|
|
pei_data.spd_addresses[i] = addr == SPD_MEMORY_DOWN ? 0 : addr;
|
|
}
|
|
|
|
post_code(0x32);
|
|
|
|
timestamp_add_now(TS_INITRAM_START);
|
|
|
|
pei_data.boot_mode = power_state->prev_sleep_state;
|
|
|
|
/* Initialize RAM */
|
|
sdram_initialize(&pei_data);
|
|
|
|
timestamp_add_now(TS_INITRAM_END);
|
|
|
|
int cbmem_was_initted = !cbmem_recovery(s3resume);
|
|
if (s3resume && !cbmem_was_initted) {
|
|
/* Failed S3 resume, reset to come up cleanly */
|
|
printk(BIOS_CRIT, "Failed to recover CBMEM in S3 resume.\n");
|
|
system_reset();
|
|
}
|
|
|
|
save_mrc_data(&pei_data);
|
|
|
|
setup_sdram_meminfo(&pei_data);
|
|
}
|