This adds a new interface for storage devices. A driver for ATA and
ATAPI drives on AHCI host controllers comes along.
The interface is very simple and was designed to match FILO's needs.
It consists of three functions:
  void storage_initialize(void);
  Initializes controllers. Should be called once at startup.
  storage_poll_t storage_probe(size_t dev_num);
     with typedef enum {
            POLL_NO_DEVICE      = -2,
            POLL_ERROR          = -1,
            POLL_NO_MEDIUM      =  0,
            POLL_MEDIUM_PRESENT =  1,
          } storage_poll_t;
  Looks for a drive with number dev_num (drives are counted from
  zero) and polls for a medium in the drive if appropriate.
  int storage_read_blocks512(size_t dev_num,
                             u64 start, size_t count,
                             unsigned char *buf);
  Reads count blocks of 512 bytes from block start of drive dev_num
  into buf.
Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
		
	
		
			
				
	
	
		
			79 lines
		
	
	
		
			2.6 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			79 lines
		
	
	
		
			2.6 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * This file is part of the libpayload project.
 | 
						|
 *
 | 
						|
 * Copyright (C) 2012 secunet Security Networks AG
 | 
						|
 *
 | 
						|
 * Redistribution and use in source and binary forms, with or without
 | 
						|
 * modification, are permitted provided that the following conditions
 | 
						|
 * are met:
 | 
						|
 * 1. Redistributions of source code must retain the above copyright
 | 
						|
 *    notice, this list of conditions and the following disclaimer.
 | 
						|
 * 2. Redistributions in binary form must reproduce the above copyright
 | 
						|
 *    notice, this list of conditions and the following disclaimer in the
 | 
						|
 *    documentation and/or other materials provided with the distribution.
 | 
						|
 * 3. The name of the author may not be used to endorse or promote products
 | 
						|
 *    derived from this software without specific prior written permission.
 | 
						|
 *
 | 
						|
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 | 
						|
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 | 
						|
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 | 
						|
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 | 
						|
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 | 
						|
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 | 
						|
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 | 
						|
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 | 
						|
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 | 
						|
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 | 
						|
 * SUCH DAMAGE.
 | 
						|
 */
 | 
						|
 | 
						|
#ifndef _STORAGE_ATAPI_H
 | 
						|
#define _STORAGE_ATAPI_H
 | 
						|
 | 
						|
#include <stdint.h>
 | 
						|
 | 
						|
#include "storage.h"
 | 
						|
#include "ata.h"
 | 
						|
 | 
						|
 | 
						|
/* ATAPI commands */
 | 
						|
enum {
 | 
						|
	ATAPI_TEST_UNIT_READY			= 0x00,
 | 
						|
	ATAPI_REQUEST_SENSE			= 0x03,
 | 
						|
	ATAPI_START_STOP_UNIT			= 0x1b,
 | 
						|
	ATAPI_PREVENT_ALLOW_MEDIUM_REMOVAL	= 0x1e,
 | 
						|
	ATAPI_READ_CAPACITY			= 0x25,
 | 
						|
	ATAPI_READ_10				= 0x28,
 | 
						|
};
 | 
						|
 | 
						|
/* ATAPI sense codes */
 | 
						|
enum {
 | 
						|
	ATAPI_SENSE_NOT_READY		= 0x02,
 | 
						|
	ATAPI_SENSE_UNIT_ATTENTION	= 0x06,
 | 
						|
};
 | 
						|
 | 
						|
/* ATAPI additional sense codes (particularize the above) */
 | 
						|
enum {
 | 
						|
	ATAPI_ADDITIONAL_SENSE_LOGICAL_UNIT_NOT_READY	= 0x04,
 | 
						|
	ATAPI_ADDITIONAL_SENSE_MEDIUM_NOT_PRESENT	= 0x3a,
 | 
						|
};
 | 
						|
 | 
						|
struct atapi_dev;
 | 
						|
 | 
						|
typedef struct atapi_dev {
 | 
						|
	/* Keep this at offset 0 so we can cast to ata_dev_t. */
 | 
						|
	ata_dev_t ata_dev;
 | 
						|
 | 
						|
	int (*identify)(struct ata_dev *, u8 *buf); /* yes, ata_dev_t */
 | 
						|
	ssize_t (*packet_read_cmd)(struct atapi_dev *, const u8 *cmd, size_t cmdlen, u8 *buf, size_t buflen);
 | 
						|
 | 
						|
	u8 sense_data[19]; /* We needed 19 in usbmsc.c. */
 | 
						|
	u8 medium_present;
 | 
						|
 | 
						|
	void (*detach_device)(struct atapi_dev *);
 | 
						|
} atapi_dev_t;
 | 
						|
 | 
						|
int atapi_attach_device(atapi_dev_t *, storage_port_t);
 | 
						|
 | 
						|
#endif
 |