As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI, hence modify SoC code to reflect the same. This patch replaces all SoC specific PCI LPC references with ESPI except anything that touches intel common code block. Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
277 lines
6.3 KiB
C
277 lines
6.3 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright (C) 2018 Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* Helper functions for dealing with power management registers
|
|
* and the differences between PCH variants.
|
|
*/
|
|
|
|
#define __SIMPLE_DEVICE__
|
|
|
|
#include <device/mmio.h>
|
|
#include <cbmem.h>
|
|
#include <device/device.h>
|
|
#include <device/pci.h>
|
|
#include <device/pci_def.h>
|
|
#include <console/console.h>
|
|
#include <intelblocks/pmclib.h>
|
|
#include <intelblocks/rtc.h>
|
|
#include <intelblocks/tco.h>
|
|
#include <stdlib.h>
|
|
#include <soc/espi.h>
|
|
#include <soc/gpe.h>
|
|
#include <soc/gpio.h>
|
|
#include <soc/iomap.h>
|
|
#include <soc/pci_devs.h>
|
|
#include <soc/pm.h>
|
|
#include <soc/smbus.h>
|
|
#include <security/vboot/vbnv.h>
|
|
|
|
#include "chip.h"
|
|
|
|
/*
|
|
* SMI
|
|
*/
|
|
|
|
const char *const *soc_smi_sts_array(size_t *a)
|
|
{
|
|
static const char *const smi_sts_bits[] = {
|
|
[BIOS_STS_BIT] = "BIOS",
|
|
[LEGACY_USB_STS_BIT] = "LEGACY_USB",
|
|
[SMI_ON_SLP_EN_STS_BIT] = "SLP_SMI",
|
|
[APM_STS_BIT] = "APM",
|
|
[SWSMI_TMR_STS_BIT] = "SWSMI_TMR",
|
|
[PM1_STS_BIT] = "PM1",
|
|
[GPE0_STS_BIT] = "GPE0",
|
|
[GPIO_STS_BIT] = "GPI",
|
|
[MCSMI_STS_BIT] = "MCSMI",
|
|
[DEVMON_STS_BIT] = "DEVMON",
|
|
[TCO_STS_BIT] = "TCO",
|
|
[PERIODIC_STS_BIT] = "PERIODIC",
|
|
[SERIRQ_SMI_STS_BIT] = "SERIRQ_SMI",
|
|
[SMBUS_SMI_STS_BIT] = "SMBUS_SMI",
|
|
[PCI_EXP_SMI_STS_BIT] = "PCI_EXP_SMI",
|
|
[MONITOR_STS_BIT] = "MONITOR",
|
|
[SPI_SMI_STS_BIT] = "SPI",
|
|
[GPIO_UNLOCK_SMI_STS_BIT] = "GPIO_UNLOCK",
|
|
[ESPI_SMI_STS_BIT] = "ESPI_SMI",
|
|
};
|
|
|
|
*a = ARRAY_SIZE(smi_sts_bits);
|
|
return smi_sts_bits;
|
|
}
|
|
|
|
/*
|
|
* TCO
|
|
*/
|
|
|
|
const char *const *soc_tco_sts_array(size_t *a)
|
|
{
|
|
static const char *const tco_sts_bits[] = {
|
|
[0] = "NMI2SMI",
|
|
[1] = "SW_TCO",
|
|
[2] = "TCO_INT",
|
|
[3] = "TIMEOUT",
|
|
[7] = "NEWCENTURY",
|
|
[8] = "BIOSWR",
|
|
[9] = "DMISCI",
|
|
[10] = "DMISMI",
|
|
[12] = "DMISERR",
|
|
[13] = "SLVSEL",
|
|
[16] = "INTRD_DET",
|
|
[17] = "SECOND_TO",
|
|
[18] = "BOOT",
|
|
[20] = "SMLINK_SLV"
|
|
};
|
|
|
|
*a = ARRAY_SIZE(tco_sts_bits);
|
|
return tco_sts_bits;
|
|
}
|
|
|
|
/*
|
|
* GPE0
|
|
*/
|
|
|
|
const char *const *soc_std_gpe_sts_array(size_t *a)
|
|
{
|
|
static const char *const gpe_sts_bits[] = {
|
|
[1] = "HOTPLUG",
|
|
[2] = "SWGPE",
|
|
[6] = "TCO_SCI",
|
|
[7] = "SMB_WAK",
|
|
[9] = "PCI_EXP",
|
|
[10] = "BATLOW",
|
|
[11] = "PME",
|
|
[12] = "ME",
|
|
[13] = "PME_B0",
|
|
[14] = "eSPI",
|
|
[15] = "GPIO Tier-2",
|
|
[16] = "LAN_WAKE",
|
|
[18] = "WADT"
|
|
};
|
|
|
|
*a = ARRAY_SIZE(gpe_sts_bits);
|
|
return gpe_sts_bits;
|
|
}
|
|
|
|
void pmc_set_disb(void)
|
|
{
|
|
/* Set the DISB after DRAM init */
|
|
uint8_t disb_val;
|
|
/* Only care about bits [23:16] of register GEN_PMCON_A */
|
|
uint8_t *addr = (void *)(pmc_mmio_regs() + GEN_PMCON_A + 2);
|
|
|
|
disb_val = read8(addr);
|
|
disb_val |= (DISB >> 16);
|
|
|
|
/* Don't clear bits that are write-1-to-clear */
|
|
disb_val &= ~((MS4V | SUS_PWR_FLR) >> 16);
|
|
write8(addr, disb_val);
|
|
}
|
|
|
|
void pmc_clear_pmcon_sts(void)
|
|
{
|
|
uint32_t reg_val;
|
|
uint8_t *addr;
|
|
addr = pmc_mmio_regs();
|
|
|
|
reg_val = read32(addr + GEN_PMCON_A);
|
|
/* Clear SUS_PWR_FLR, GBL_RST_STS, HOST_RST_STS, PWR_FLR bits
|
|
* while retaining MS4V write-1-to-clear bit */
|
|
reg_val &= ~(MS4V);
|
|
|
|
write32((addr + GEN_PMCON_A), reg_val);
|
|
}
|
|
|
|
/*
|
|
* PMC controller gets hidden from PCI bus
|
|
* during FSP-Silicon init call. Hence PWRMBASE
|
|
* can't be accessible using PCI configuration space
|
|
* read/write.
|
|
*/
|
|
uint8_t *pmc_mmio_regs(void)
|
|
{
|
|
return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS;
|
|
}
|
|
|
|
uintptr_t soc_read_pmc_base(void)
|
|
{
|
|
return (uintptr_t)pmc_mmio_regs();
|
|
}
|
|
|
|
void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2)
|
|
{
|
|
DEVTREE_CONST struct soc_intel_icelake_config *config;
|
|
|
|
/* Look up the device in devicetree */
|
|
DEVTREE_CONST struct device *dev = dev_find_slot(0, PCH_DEVFN_PMC);
|
|
if (!dev || !dev->chip_info) {
|
|
printk(BIOS_ERR, "BUG! Could not find SOC devicetree config\n");
|
|
return;
|
|
}
|
|
config = dev->chip_info;
|
|
|
|
/* Assign to out variable */
|
|
*dw0 = config->gpe0_dw0;
|
|
*dw1 = config->gpe0_dw1;
|
|
*dw2 = config->gpe0_dw2;
|
|
}
|
|
|
|
static int rtc_failed(uint32_t gen_pmcon_b)
|
|
{
|
|
return !!(gen_pmcon_b & RTC_BATTERY_DEAD);
|
|
}
|
|
|
|
int soc_get_rtc_failed(void)
|
|
{
|
|
const struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
|
|
|
|
if (!ps) {
|
|
printk(BIOS_ERR, "Could not find power state in cbmem, RTC init aborted\n");
|
|
return 1;
|
|
}
|
|
|
|
return rtc_failed(ps->gen_pmcon_b);
|
|
}
|
|
|
|
int vbnv_cmos_failed(void)
|
|
{
|
|
return rtc_failed(read32(pmc_mmio_regs() + GEN_PMCON_B));
|
|
}
|
|
|
|
static inline int deep_s3_enabled(void)
|
|
{
|
|
uint32_t deep_s3_pol;
|
|
|
|
deep_s3_pol = read32(pmc_mmio_regs() + S3_PWRGATE_POL);
|
|
return !!(deep_s3_pol & (S3DC_GATE_SUS | S3AC_GATE_SUS));
|
|
}
|
|
|
|
/* Return 0, 3, or 5 to indicate the previous sleep state. */
|
|
int soc_prev_sleep_state(const struct chipset_power_state *ps,
|
|
int prev_sleep_state)
|
|
{
|
|
|
|
/*
|
|
* Check for any power failure to determine if this a wake from
|
|
* S5 because the PCH does not set the WAK_STS bit when waking
|
|
* from a true G3 state.
|
|
*/
|
|
if (ps->gen_pmcon_a & (PWR_FLR | SUS_PWR_FLR))
|
|
prev_sleep_state = ACPI_S5;
|
|
|
|
/*
|
|
* If waking from S3 determine if deep S3 is enabled. If not,
|
|
* need to check both deep sleep well and normal suspend well.
|
|
* Otherwise just check deep sleep well.
|
|
*/
|
|
if (prev_sleep_state == ACPI_S3) {
|
|
/* PWR_FLR represents deep sleep power well loss. */
|
|
uint32_t mask = PWR_FLR;
|
|
|
|
/* If deep s3 isn't enabled check the suspend well too. */
|
|
if (!deep_s3_enabled())
|
|
mask |= SUS_PWR_FLR;
|
|
|
|
if (ps->gen_pmcon_a & mask)
|
|
prev_sleep_state = ACPI_S5;
|
|
}
|
|
|
|
return prev_sleep_state;
|
|
}
|
|
|
|
void soc_fill_power_state(struct chipset_power_state *ps)
|
|
{
|
|
uint8_t *pmc;
|
|
|
|
ps->tco1_sts = tco_read_reg(TCO1_STS);
|
|
ps->tco2_sts = tco_read_reg(TCO2_STS);
|
|
|
|
printk(BIOS_DEBUG, "TCO_STS: %04x %04x\n",
|
|
ps->tco1_sts, ps->tco2_sts);
|
|
|
|
pmc = pmc_mmio_regs();
|
|
ps->gen_pmcon_a = read32(pmc + GEN_PMCON_A);
|
|
ps->gen_pmcon_b = read32(pmc + GEN_PMCON_B);
|
|
ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0);
|
|
ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1);
|
|
|
|
printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n",
|
|
ps->gen_pmcon_a, ps->gen_pmcon_b);
|
|
|
|
printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n",
|
|
ps->gblrst_cause[0], ps->gblrst_cause[1]);
|
|
}
|