4bd65e1c0c
This changes the API to rkclk_configure_cpu() such that we can pass in the desired APLL frequency in each veyron board's bootblock.c. Devices with a constrainted form facter (rialto and possibly mickey) will use this to run firmware at a slower speed to mitigate risk of thermal issues (due to the RK808, not the RK3288). BUG=chrome-os-partner:42054 BRANCH=none TEST=amstan says rialto is noticably cooler (and slower) Change-Id: I28b332e1d484bd009599944cd9f5cf633ea468dd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d10af5e18b4131a00f202272e405bd22eab4caeb Original-Change-Id: I960cb6ff512c058e72032aa2cbadedde97510631 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297190 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/11582 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
81 lines
2.4 KiB
C
81 lines
2.4 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright 2014 Rockchip Inc.
|
|
* Copyright 2014 Google Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc.
|
|
*/
|
|
|
|
#include <arch/io.h>
|
|
#include <assert.h>
|
|
#include <bootblock_common.h>
|
|
#include <console/console.h>
|
|
#include <delay.h>
|
|
#include <reset.h>
|
|
#include <soc/clock.h>
|
|
#include <soc/i2c.h>
|
|
#include <soc/grf.h>
|
|
#include <soc/pmu.h>
|
|
#include <soc/rk808.h>
|
|
#include <soc/spi.h>
|
|
#include <vendorcode/google/chromeos/chromeos.h>
|
|
|
|
#include "board.h"
|
|
|
|
void bootblock_mainboard_early_init()
|
|
{
|
|
if (IS_ENABLED(CONFIG_DRIVERS_UART)) {
|
|
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
|
|
write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
|
|
}
|
|
|
|
}
|
|
|
|
void bootblock_mainboard_init(void)
|
|
{
|
|
if (rkclk_was_watchdog_reset())
|
|
reboot_from_watchdog();
|
|
|
|
/* Turn on all leds */
|
|
gpio_output(GPIO(7, A, 0), 1); /* LED_READY */
|
|
gpio_output(GPIO(7, B, 5), 1); /* Ready2_LED */
|
|
gpio_output(GPIO(7, B, 3), 1); /* LED_SYNCING */
|
|
gpio_output(GPIO(7, B, 7), 1); /* LED_ERROR */
|
|
|
|
/* Up VDD_CPU (BUCK1) to 1.4V to support max CPU frequency (1.8GHz). */
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL);
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
|
|
assert(CONFIG_PMIC_BUS == 0); /* must correspond with IOMUX */
|
|
i2c_init(CONFIG_PMIC_BUS, 400*KHz);
|
|
|
|
/* Slowly raise to max CPU voltage to prevent overshoot */
|
|
rk808_configure_buck(1, 1200);
|
|
udelay(175);/* Must wait for voltage to stabilize,2mV/us */
|
|
rk808_configure_buck(1, 1400);
|
|
udelay(100);/* Must wait for voltage to stabilize,2mV/us */
|
|
rkclk_configure_cpu(APLL_1392_MHZ);
|
|
|
|
/* i2c1 for tpm */
|
|
write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
|
|
i2c_init(1, 400*KHz);
|
|
|
|
/* spi2 for firmware ROM */
|
|
write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
|
|
write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
|
|
rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 24750*KHz);
|
|
|
|
setup_chromeos_gpios();
|
|
}
|