This adds a new interface for storage devices. A driver for ATA and
ATAPI drives on AHCI host controllers comes along.
The interface is very simple and was designed to match FILO's needs.
It consists of three functions:
  void storage_initialize(void);
  Initializes controllers. Should be called once at startup.
  storage_poll_t storage_probe(size_t dev_num);
     with typedef enum {
            POLL_NO_DEVICE      = -2,
            POLL_ERROR          = -1,
            POLL_NO_MEDIUM      =  0,
            POLL_MEDIUM_PRESENT =  1,
          } storage_poll_t;
  Looks for a drive with number dev_num (drives are counted from
  zero) and polls for a medium in the drive if appropriate.
  int storage_read_blocks512(size_t dev_num,
                             u64 start, size_t count,
                             unsigned char *buf);
  Reads count blocks of 512 bytes from block start of drive dev_num
  into buf.
Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
		
	
		
			
				
	
	
		
			207 lines
		
	
	
		
			5.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			207 lines
		
	
	
		
			5.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * This file is part of the libpayload project.
 | |
|  *
 | |
|  * Copyright (C) 2012 secunet Security Networks AG
 | |
|  *
 | |
|  * Redistribution and use in source and binary forms, with or without
 | |
|  * modification, are permitted provided that the following conditions
 | |
|  * are met:
 | |
|  * 1. Redistributions of source code must retain the above copyright
 | |
|  *    notice, this list of conditions and the following disclaimer.
 | |
|  * 2. Redistributions in binary form must reproduce the above copyright
 | |
|  *    notice, this list of conditions and the following disclaimer in the
 | |
|  *    documentation and/or other materials provided with the distribution.
 | |
|  * 3. The name of the author may not be used to endorse or promote products
 | |
|  *    derived from this software without specific prior written permission.
 | |
|  *
 | |
|  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 | |
|  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 | |
|  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 | |
|  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 | |
|  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 | |
|  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 | |
|  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 | |
|  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 | |
|  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 | |
|  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 | |
|  * SUCH DAMAGE.
 | |
|  */
 | |
| 
 | |
| #include <stdint.h>
 | |
| #include <stdio.h>
 | |
| #include <libpayload.h>
 | |
| 
 | |
| #include <storage/ata.h>
 | |
| #include <storage/atapi.h>
 | |
| 
 | |
| 
 | |
| static int atapi_request_sense(atapi_dev_t *const dev)
 | |
| {
 | |
| 	u8 cdb[12] = { 0, };
 | |
| 	cdb[0] = ATAPI_REQUEST_SENSE;
 | |
| 	cdb[4] = sizeof(dev->sense_data);
 | |
| 	return dev->packet_read_cmd(dev, cdb, sizeof(cdb),
 | |
| 			dev->sense_data, sizeof(dev->sense_data));
 | |
| }
 | |
| 
 | |
| static ssize_t atapi_packet_read_cmd(atapi_dev_t *const dev,
 | |
| 				     const u8 *const cmd, const size_t cmdlen,
 | |
| 				     u8 *const buf, const size_t buflen)
 | |
| {
 | |
| 	int retries = 10;
 | |
| 	ssize_t ret;
 | |
| 
 | |
| 	do {
 | |
| 		ret = dev->packet_read_cmd(dev, cmd, cmdlen, buf, buflen);
 | |
| 		if (ret >= 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		ret = atapi_request_sense(dev);
 | |
| 		if (ret < 0) {
 | |
| 			printf("atapi: Requesting sense failed.\n");
 | |
| 			return -1;
 | |
| 		}
 | |
| 
 | |
| 		switch (dev->sense_data[2] & 0xf) {
 | |
| 		case ATAPI_SENSE_UNIT_ATTENTION:
 | |
| 			/* Nothing to do. */
 | |
| 			break;
 | |
| 		case ATAPI_SENSE_NOT_READY:
 | |
| 			switch (dev->sense_data[12]) {
 | |
| 			case ATAPI_ADDITIONAL_SENSE_LOGICAL_UNIT_NOT_READY:
 | |
| 				/* Device wants more time. */
 | |
| 				delay(3);
 | |
| 				break;
 | |
| 			case ATAPI_ADDITIONAL_SENSE_MEDIUM_NOT_PRESENT:
 | |
| 				printf("atapi: No medium present.\n");
 | |
| 				dev->medium_present = 0;
 | |
| 				return -1;
 | |
| 			}
 | |
| 			break;
 | |
| 		default:
 | |
| 			return -1;
 | |
| 		}
 | |
| 	} while (retries--);
 | |
| 
 | |
| 	/* No more retries. */
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| static ssize_t atapi_packet_read_sectors(ata_dev_t *const _dev,
 | |
| 					 const lba_t start, size_t count,
 | |
| 					 u8 *const buf)
 | |
| {
 | |
| 	atapi_dev_t *const dev = (atapi_dev_t *)_dev;
 | |
| 
 | |
| 	if (start >= (1ULL << 32)) {
 | |
| 		printf("atapi: Sector is not 32-bit addressable.\n");
 | |
| 		return -1;
 | |
| 	} else if (count >= (64 * 1024)) {
 | |
| 	       printf("ahci: Sector count too high (max. 65535).\n");
 | |
| 	       count = (64 * 1024) - 1;
 | |
| 	}
 | |
| 
 | |
| 	u8 cdb[12] = { 0, };
 | |
| 	cdb[0] = ATAPI_READ_10;
 | |
| 	cdb[2] = (start >> 24) & 0xff;
 | |
| 	cdb[3] = (start >> 16) & 0xff;
 | |
| 	cdb[4] = (start >>  8) & 0xff;
 | |
| 	cdb[5] = (start >>  0) & 0xff;
 | |
| 	cdb[7] = (count >>  8) & 0xff;
 | |
| 	cdb[8] = (count >>  0) & 0xff;
 | |
| 	const ssize_t ret = atapi_packet_read_cmd(dev, cdb, sizeof(cdb),
 | |
| 				buf, count << dev->ata_dev.sector_size_shift);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 	else
 | |
| 		return ret >> dev->ata_dev.sector_size_shift;
 | |
| }
 | |
| 
 | |
| static storage_poll_t atapi_poll(storage_dev_t *const _dev)
 | |
| {
 | |
| 	atapi_dev_t *const dev = (atapi_dev_t *)_dev;
 | |
| 
 | |
| 	u8 cdb[12] = { 0, };
 | |
| 	u8 capacity[8];
 | |
| 
 | |
| 	if (dev->medium_present)
 | |
| 		return POLL_MEDIUM_PRESENT;
 | |
| 
 | |
| 	cdb[0] = ATAPI_TEST_UNIT_READY;
 | |
| 	const int ret = atapi_packet_read_cmd(dev, cdb, sizeof(cdb), NULL, 0);
 | |
| 	if (!ret) {
 | |
| 		printf("atapi: Found medium.\n");
 | |
| 		dev->medium_present = 1;
 | |
| 	} else if (dev->medium_present) {
 | |
| 		return POLL_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	if (dev->medium_present) {
 | |
| 		cdb[0] = ATAPI_START_STOP_UNIT;
 | |
| 		cdb[4] = 0x01; /* Start Disc, read TOC. */
 | |
| 		if (atapi_packet_read_cmd(dev, cdb, sizeof(cdb), NULL, 0))
 | |
| 			goto _error_ret;
 | |
| 		cdb[4] = 0x00;
 | |
| 	}
 | |
| 
 | |
| 	cdb[0] = ATAPI_PREVENT_ALLOW_MEDIUM_REMOVAL;
 | |
| 	cdb[2] = 0x02; /* Clear persistent prevent removal bit. */
 | |
| 	atapi_packet_read_cmd(dev, cdb, sizeof(cdb), NULL, 0);
 | |
| 	cdb[2] = 0x00; /* Clear prevent removal bit. */
 | |
| 	atapi_packet_read_cmd(dev, cdb, sizeof(cdb), NULL, 0);
 | |
| 
 | |
| 	/* If we don't have a medium, we're done. */
 | |
| 	if (!dev->medium_present)
 | |
| 		return POLL_NO_MEDIUM;
 | |
| 
 | |
| 	/* Read capacity and sector size. */
 | |
| 	cdb[0] = ATAPI_READ_CAPACITY;
 | |
| 	if (atapi_packet_read_cmd(dev, cdb, sizeof(cdb),
 | |
| 				  (u8 *)capacity, sizeof(capacity))
 | |
| 			!= sizeof(capacity))
 | |
| 		goto _error_ret;
 | |
| 	const u32 sector_size = (capacity[4] << 24) |
 | |
| 				(capacity[5] << 16) |
 | |
| 				(capacity[6] <<  8) |
 | |
| 				(capacity[7] <<  0);
 | |
| 	if (ata_set_sector_size(&dev->ata_dev, sector_size)) {
 | |
| 		dev->medium_present = 0;
 | |
| 		return POLL_MEDIUM_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	return POLL_MEDIUM_PRESENT;
 | |
| 
 | |
| _error_ret:
 | |
| 	dev->medium_present = 0;
 | |
| 	return POLL_ERROR;
 | |
| }
 | |
| 
 | |
| int atapi_attach_device(atapi_dev_t *const dev, const storage_port_t port_type)
 | |
| {
 | |
| 	u16 id[256];
 | |
| 
 | |
| 	dev->ata_dev.identify_cmd = ATA_IDENTIFY_PACKET_DEVICE;
 | |
| 	if (dev->identify(&dev->ata_dev, (u8 *)id))
 | |
| 		return -1;
 | |
| 
 | |
| 	char fw[9], model[41];
 | |
| 	ata_strncpy(fw, id + 23, sizeof(fw));
 | |
| 	ata_strncpy(model, id + 27, sizeof(model));
 | |
| 	printf("atapi: Identified %s [%s]\n", model, fw);
 | |
| 
 | |
| 	/* Initialize to sane values. */
 | |
| 	dev->ata_dev.sector_size = 2048;
 | |
| 	dev->ata_dev.sector_size_shift = 11;
 | |
| 
 | |
| 	dev->medium_present = 0;
 | |
| 
 | |
| 	/* Reuse ata procedures. */
 | |
| 	ata_initialize_storage_ops(&dev->ata_dev);
 | |
| 
 | |
| 	dev->ata_dev.read_sectors = atapi_packet_read_sectors;
 | |
| 	dev->ata_dev.storage_dev.port_type = port_type;
 | |
| 	dev->ata_dev.storage_dev.poll = atapi_poll;
 | |
| 
 | |
| 	return storage_attach_device(&dev->ata_dev.storage_dev);
 | |
| }
 |