Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
		
			
				
	
	
		
			156 lines
		
	
	
		
			4.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			156 lines
		
	
	
		
			4.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /* SPDX-License-Identifier: GPL-2.0-or-later */
 | |
| 
 | |
| #include "superiotool.h"
 | |
| 
 | |
| #define DEVICE_ID_VT82C686_REG	0xe0
 | |
| #define DEVICE_REV_VT82C686_REG	0xe1
 | |
| 
 | |
| #define DEVICE_ID_VT1211_REG    0x20
 | |
| #define DEVICE_REV_VT1211_REG   0x21
 | |
| 
 | |
| static const struct superio_registers reg_table[] = {
 | |
| 	{0x3c00, "VT82C686A/VT82C686B", {
 | |
| 		{EOT}}},
 | |
| 	{0x3c01, "VT1211", {
 | |
| 		{NOLDN, NULL,
 | |
| 			{0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,
 | |
| 			 0x2e,0x2f,EOT},
 | |
| 			{0x3c,0x01,0x00,0x11,0x00,0x00,0x00,0x00,0x00,0x00,
 | |
| 			 0x00,0x00,EOT}},
 | |
| 		{0x0, "Floppy Disk Controller (FDC)",
 | |
| 			{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT},
 | |
| 			{0x00,0x03,0xf0,0x06,0x01,0x00,0x00,EOT}},
 | |
| 		{0x1, "Parallel Port (PP)",
 | |
| 			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
 | |
| 			{0x03,0x03,0x78,0x05,0x00,0x00,EOT}},
 | |
| 		{0x2, "Serial Port 1 (UART1)",
 | |
| 			{0x30,0x60,0x61,0x70,0xf0,EOT},
 | |
| 			{0x00,0x03,0xf8,0x04,0x00,EOT}},
 | |
| 		{0x3, "Serial Port 2 (UART2)",
 | |
| 			{0x30,0x60,0x61,0x70,0xf0,EOT},
 | |
| 			{0x00,0x02,0xf8,0x03,0x00,EOT}},
 | |
| 		{0x6, "MIDI",
 | |
| 			{0x30,0x60,0x61,0x70,EOT},
 | |
| 			{0x00,0x03,0x30,0x00,EOT}},
 | |
| 		{0x7, "Game Port (GMP)",
 | |
| 			{0x30,0x60,0x61,EOT},
 | |
| 			{0x00,0x02,0x00,EOT}},
 | |
| 		{0x8, "GPIO",
 | |
| 			{0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
 | |
| 			{0x00,0xe9,0x00,0x00,0x00,0x00,0x00,EOT}},
 | |
| 		{0x9, "Watch Dog (WDG)",
 | |
| 			{0x30,0x60,0x61,0x70,0xf0,EOT},
 | |
| 			{0x00,0xea,0x00,0x00,0x00,EOT}},
 | |
| 		{0xa, "Wake-up Control (WUC)",
 | |
| 			{0x30,0x60,0x61,0x70,EOT},
 | |
| 			{0x00,0xeb,0x00,0x00,EOT}},
 | |
| 		{0xb, "Hardware Monitor (HM)",
 | |
| 			{0x30,0x60,0x61,0x70,EOT},
 | |
| 			{0x00,0xec,0x00,0x00,EOT}},
 | |
| 		{0xc, "Very Fast IR (VFIR)",
 | |
| 			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
 | |
| 			{0x00,0xe8,0x00,0x00,0x06,0x00,EOT}},
 | |
| 		{0xd, "Flash ROM (ROM)",
 | |
| 			{0x30,0xf0,EOT},
 | |
| 			{0x01,0x00,EOT}},
 | |
| 		{EOT}}},
 | |
| 	{EOT}
 | |
| };
 | |
| 
 | |
| static uint8_t vt82c686_conf = 0;
 | |
| 
 | |
| static int enter_conf_mode_via_vt82c686(void)
 | |
| {
 | |
| 	struct pci_dev *dev;
 | |
| 
 | |
| 	dev = pci_dev_find(0x1106, 0x0686);
 | |
| 	if (!dev) {
 | |
| 		if (verbose)
 | |
| 			printf("  PCI device 1106:0686 not found.\n");
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	vt82c686_conf = pci_read_byte(dev, 0x85);
 | |
| 	if (verbose)
 | |
| 		printf("  Super I/O %sabled, Super I/O configuration %sabled\n",
 | |
| 		       (vt82c686_conf & (1 << 0)) ? "en" : "dis",
 | |
| 		       (vt82c686_conf & (1 << 1)) ? "en" : "dis");
 | |
| 
 | |
| 	/* If the Super I/O is not enabled, skip it. */
 | |
| 	if (!(vt82c686_conf & (1 << 0)))
 | |
| 		return 1;
 | |
| 
 | |
| 	/* Enable Super I/O configuration mode. */
 | |
| 	pci_write_byte(dev, 0x85, vt82c686_conf | (1 << 1));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void exit_conf_mode_via_vt82c686(void)
 | |
| {
 | |
| 	struct pci_dev *dev;
 | |
| 
 | |
| 	dev = pci_dev_find(0x1106, 0x0686);
 | |
| 	if (!dev) {
 | |
| 		printf("Bug: PCI device 1106:0686 not found during shutdown.\n"
 | |
| 		       "Please report to coreboot@coreboot.org.\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Restore (disable?) Super I/O configuration mode setting. */
 | |
| 	pci_write_byte(dev, 0x85, vt82c686_conf);
 | |
| }
 | |
| 
 | |
| void probe_idregs_via(uint16_t port)
 | |
| {
 | |
| 	uint16_t id;
 | |
| 	uint8_t devid;
 | |
| 	uint8_t rev;
 | |
| 
 | |
| 	if (port == 0x3f0) {
 | |
| 		probing_for("VIA", "(init=vt82c686) ", port);
 | |
| 		if (enter_conf_mode_via_vt82c686())
 | |
| 			return;
 | |
| 
 | |
| 		devid = regval(port, DEVICE_ID_VT82C686_REG);
 | |
| 		rev = regval(port, DEVICE_REV_VT82C686_REG);
 | |
| 		id = devid << 8;
 | |
| 
 | |
| 		if (superio_unknown(reg_table, id)) {
 | |
| 			if (verbose)
 | |
| 				printf(NOTFOUND "id=0x%02x, rev=0x%02x\n", devid, rev);
 | |
| 		} else {
 | |
| 			printf("Found VIA %s (id=0x%02x, rev=0x%02x) at 0x%x\n",
 | |
| 			       get_superio_name(reg_table, id), devid, rev, port);
 | |
| 			chip_found = 1;
 | |
| 		}
 | |
| 		exit_conf_mode_via_vt82c686();
 | |
| 		if (chip_found)
 | |
| 			return;
 | |
| 	} else {
 | |
| 		probing_for("VIA", "(init=0x87,0x87) ", port);
 | |
| 		enter_conf_mode_winbond_fintek_ite_8787(port);
 | |
| 
 | |
| 	        devid = regval(port, DEVICE_ID_VT1211_REG);
 | |
| 		rev = regval(port, DEVICE_REV_VT1211_REG);
 | |
| 		id = (devid << 8) | 1;
 | |
| 
 | |
| 		if (superio_unknown(reg_table, id)) {
 | |
| 			if (verbose)
 | |
| 				printf(NOTFOUND "id=0x%02x, rev=0x%02x\n", devid, rev);
 | |
| 		} else {
 | |
| 			printf("Found VIA %s (id=0x%02x, rev=0x%02x) at 0x%x\n",
 | |
| 			       get_superio_name(reg_table, id), devid, rev, port);
 | |
| 			chip_found = 1;
 | |
| 			dump_superio("VIA", reg_table, port, id, LDN_SEL);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	exit_conf_mode_winbond_fintek_ite_8787(port);
 | |
| }
 | |
| 
 | |
| void print_via_chips(void)
 | |
| {
 | |
| 	print_vendor_chips("VIA", reg_table);
 | |
| }
 |