505e383ccb
Commit 2c26108208 moved this function to
pmutil.c for Tiger Lake. Do this to all other platforms for consistency.
For Skylake, __SIMPLE_DEVICE__ preprocessor guards are no longer needed.
With this change, pmc.c is only needed in ramstage. Adjust Makefile.inc
accordingly, and drop ENV_RAMSTAGE guards from Skylake.
Change-Id: I424eb359c898f155659d085b888410b6bb58b9ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
102 lines
2.7 KiB
C
102 lines
2.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <bootstate.h>
|
|
#include <console/console.h>
|
|
#include <device/device.h>
|
|
#include <device/mmio.h>
|
|
#include <intelblocks/pmc.h>
|
|
#include <intelblocks/pmclib.h>
|
|
#include <intelblocks/rtc.h>
|
|
#include <soc/pci_devs.h>
|
|
#include <soc/pm.h>
|
|
#include <soc/soc_chip.h>
|
|
|
|
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
|
|
{
|
|
uint32_t reg;
|
|
uint8_t *pmcbase = pmc_mmio_regs();
|
|
|
|
printk(BIOS_DEBUG, "%sabling Deep S%c\n",
|
|
enable ? "En" : "Dis", sx + '0');
|
|
reg = read32(pmcbase + offset);
|
|
if (enable)
|
|
reg |= mask;
|
|
else
|
|
reg &= ~mask;
|
|
write32(pmcbase + offset, reg);
|
|
}
|
|
|
|
static void config_deep_s5(int on_ac, int on_dc)
|
|
{
|
|
/* Treat S4 the same as S5. */
|
|
config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
|
|
config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
|
|
config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
|
|
config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
|
|
}
|
|
|
|
static void config_deep_s3(int on_ac, int on_dc)
|
|
{
|
|
config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
|
|
config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
|
|
}
|
|
|
|
static void config_deep_sx(uint32_t deepsx_config)
|
|
{
|
|
uint32_t reg;
|
|
uint8_t *pmcbase = pmc_mmio_regs();
|
|
|
|
reg = read32(pmcbase + DSX_CFG);
|
|
reg &= ~DSX_CFG_MASK;
|
|
reg |= deepsx_config;
|
|
write32(pmcbase + DSX_CFG, reg);
|
|
}
|
|
|
|
static void pmc_init(struct device *dev)
|
|
{
|
|
const config_t *config = config_of_soc();
|
|
|
|
rtc_init();
|
|
|
|
pmc_set_power_failure_state(true);
|
|
pmc_gpe_init();
|
|
|
|
config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
|
|
config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
|
|
config_deep_sx(config->deep_sx_config);
|
|
}
|
|
|
|
static void soc_pmc_read_resources(struct device *dev)
|
|
{
|
|
struct resource *res;
|
|
|
|
mmio_resource(dev, 0, PCH_PWRM_BASE_ADDRESS / KiB, PCH_PWRM_BASE_SIZE / KiB);
|
|
|
|
res = new_resource(dev, 1);
|
|
res->base = (resource_t)ACPI_BASE_ADDRESS;
|
|
res->size = (resource_t)ACPI_BASE_SIZE;
|
|
res->limit = res->base + res->size + 1;
|
|
res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
|
|
}
|
|
|
|
static void soc_acpi_mode_init(struct device *dev)
|
|
{
|
|
/*
|
|
* pmc_set_acpi_mode() should be delayed until BS_DEV_INIT in order
|
|
* to ensure the ordering does not break the assumptions that other
|
|
* drivers make about ACPI mode (e.g. Chrome EC). Since it disables
|
|
* ACPI mode, other drivers may take different actions based on this
|
|
* (e.g. Chrome EC will flush any pending hostevent bits). Because
|
|
* EHL has its PMC device available for device_operations, it can be
|
|
* done from the "ops->init" callback.
|
|
*/
|
|
pmc_set_acpi_mode();
|
|
}
|
|
|
|
struct device_operations pmc_ops = {
|
|
.read_resources = soc_pmc_read_resources,
|
|
.set_resources = noop_set_resources,
|
|
.init = soc_acpi_mode_init,
|
|
.enable = pmc_init,
|
|
};
|