Files
system76-coreboot/src/superio/ite/it8661f/it8661f.h
Patrick Georgi b890a1228d Remove address from GPLv2 headers
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.

However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.

util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.

$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
	-a \! -name \*.patch \
	-a \! -name \*_shipped \
	-a \! -name LICENSE_GPL \
	-a \! -name LGPL.txt \
	-a \! -name COPYING \
	-a \! -name DISCLAIMER \
	-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +

Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-21 20:50:25 +02:00

58 lines
2.0 KiB
C

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.
*/
#ifndef SUPERIO_ITE_IT8661F_H
#define SUPERIO_ITE_IT8661F_H
/* Datasheet: http://www.ite.com.tw/product_info/PC/Brief-IT8661_2.asp */
/* Logical device numbers (LDNs). */
#define IT8661F_FDC 0x00 /* Floppy */
#define IT8661F_SP1 0x01 /* Com1 */
#define IT8661F_SP2 0x02 /* Com2 */
#define IT8661F_PP 0x03 /* Parallel port */
#define IT8661F_IR 0x04 /* IR */
#define IT8661F_GPIO 0x05 /* GPIO & Alternate Function Configuration */
/* Register and bit definitions. */
#define IT8661F_REG_CC 0x02 /* Configure Control (write-only). */
#define IT8661F_REG_LDE 0x23 /* PnP Logical Device Enable. */
#define IT8661F_REG_SWSUSP 0x24 /* Software Suspend + Clock Select. */
#define IT8661F_ISA_PNP_PORT 0x0279 /* Write-only. */
#define IT8661F_CLKIN_24_MHZ 0
#define IT8661F_CLKIN_48_MHZ 1
/*
* Special values used for entering MB PnP mode. The first four bytes of
* each line determine the address port, the last four are data.
*/
static const u8 init_values[] = {
0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe,
0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61,
0xb0, 0x58, 0x2c, 0x16, /**/ 0x8b, 0x45, 0xa2, 0xd1,
0xe8, 0x74, 0x3a, 0x9d, /**/ 0xce, 0xe7, 0x73, 0x39,
};
void it8661f_enable_serial(pnp_devfn_t dev, u16 iobase);
#endif /* SUPERIO_ITE_IT8661F_H */