Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
65 lines
1.8 KiB
C
65 lines
1.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <console/console.h>
|
|
#include <device/device.h>
|
|
#include <device/pci.h>
|
|
#include <device/pci_ids.h>
|
|
#include <device/pci_ops.h>
|
|
#include "chip.h"
|
|
#include "i82801dx.h"
|
|
|
|
typedef struct southbridge_intel_i82801dx_config config_t;
|
|
|
|
static void ide_init(struct device *dev)
|
|
{
|
|
/* Get the chip configuration */
|
|
config_t *config = dev->chip_info;
|
|
|
|
/* Enable IDE devices so the Linux IDE driver will work. */
|
|
uint16_t ideTimingConfig;
|
|
|
|
ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI);
|
|
ideTimingConfig &= ~IDE_DECODE_ENABLE;
|
|
if (!config || config->ide0_enable) {
|
|
/* Enable primary IDE interface. */
|
|
ideTimingConfig |= IDE_DECODE_ENABLE;
|
|
printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n");
|
|
} else {
|
|
printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n");
|
|
}
|
|
pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig);
|
|
|
|
ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC);
|
|
ideTimingConfig &= ~IDE_DECODE_ENABLE;
|
|
if (!config || config->ide1_enable) {
|
|
/* Enable secondary IDE interface. */
|
|
ideTimingConfig |= IDE_DECODE_ENABLE;
|
|
printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n");
|
|
} else {
|
|
printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n");
|
|
}
|
|
pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig);
|
|
}
|
|
|
|
static struct device_operations ide_ops = {
|
|
.read_resources = pci_dev_read_resources,
|
|
.set_resources = pci_dev_set_resources,
|
|
.enable_resources = pci_dev_enable_resources,
|
|
.init = ide_init,
|
|
.enable = i82801dx_enable,
|
|
};
|
|
|
|
/* 82801DB */
|
|
static const struct pci_driver i82801db_ide __pci_driver = {
|
|
.ops = &ide_ops,
|
|
.vendor = PCI_VID_INTEL,
|
|
.device = 0x24cb,
|
|
};
|
|
|
|
/* 82801DBM */
|
|
static const struct pci_driver i82801dbm_ide __pci_driver = {
|
|
.ops = &ide_ops,
|
|
.vendor = PCI_VID_INTEL,
|
|
.device = 0x24ca,
|
|
};
|